- January 19, 2006
- 169
- 0
How do you switch between tuner one and two in my tv? I have a pvr 500mce. Also how do you record on one tuner and watch on the other tuner? I'm using RC4. THANX!
Dual tuner?? (3 Viewers)
- Thread starter nettech_gt
- Start date
In the tv cards setting of MP config, set one with a higher priority than the other.
Then everything happens automatically after that. If you are recording and watching a program, when you change channels the original card (the one with the higher priority) keeps recording and the second card starts up to watch the second channel.
There shouldn't need to be anything done on your part, just to watch a different channel
Then everything happens automatically after that. If you are recording and watching a program, when you change channels the original card (the one with the higher priority) keeps recording and the second card starts up to watch the second channel.
There shouldn't need to be anything done on your part, just to watch a different channel
- January 19, 2006
- 169
- 0
- Thread starter
- #3
Cool! Thanx! I'll give that a try
Users who are viewing this thread
Similar threads
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network.
Hauppauge card retired long ago. I have also retired very early SD units, the Quatros seem to work much better than the older units.
Go to SD's support website and download and install the windows...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network...
I am currently using a Hauppauge WinTV QuadHD PCIe card on MP1 (1.37) for DVB-T, but 2 of the tuners have died. Thinking about...
I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation.
"TV Server Config" has a "TV Mapping" panel in the "TV Channels" section. On the "TV Mapping" tab:
The left column lists the channels that have not yet been mapped to the TV tuner identified by the drop-down menu just...
I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation.
"TV Server...
I've scanned for channels, and got all channels mapped to tuner 0 of my 8 channel TV card (eg: 2 cards of 4 channels each)
Is there...
Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download page, there was an additional item called "TBS6281se V2 Change Mode Tool". There was zero documentation to accompany this. I downloaded it and ran it. It is a tool to detect the current run state of both...
Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download...
My previous TBS PCI-E card failed, so I bought another one. The model I chose is the TBS 6181-SE, which can be seen on Amazon here...
MP1
MP2
1.38
Running TVService as "NT Service\TVService" or "Local Service" not working anymore since Windows September 2025 updates
DE
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
I used to run the TVService under the "NT Service\TVService" account to follow least privileges principal (not exposing my whole...
O Frabjous Joy!
That seems to have done the trick.
Thank you so much for your help and advice, CyberSimian. I hadn't thought of deleting the various folders, but I'll bear that in mind for any future disasters. Now I can record King & Conqueror on Sunday!
Cheers
Ralph
O Frabjous Joy!
That seems to have done the trick.
Thank you so much for your help and advice, CyberSimian. I hadn't thought of...
I've been running MediaPortal on my PC for several years, but the most recent update "MediaPortal 1.38 Release " does...