Failed to create graph (1 Viewer)

AberDino

MP Donator
  • Premium Supporter
  • February 17, 2005
    240
    28
    Kincardineshire
    Home Country
    Scotland Scotland
    Area: Media Portal Program
    MediaPortal Version: 0.2.0.0 RC2 (2006-01-14)
    MediaPortal Skin: BlueTwo
    Windows Version: Windows XP (SP2)
    .NET CLR Version: 2.0.50727
    DirectX Version: 4.09.00.0904 (9.0c)
    Audio Codec: NVIDIA Audio Decoder
    Video Codec: NVIDIA Video Decoder
    CPU Type: AMD Athlon XP 2000+
    Memory: 511 MB
    Motherboard: MK79G-1394 (AOpen)
    TV Card Model: Hauppauge Nova-t (Technotrend)
    TV Card Type: DVB
    TV Card Driver: 4.4.10.11
    Video Card Model: Radeon 9800 Pro (128 MB)
    Video Card Driver: Catalyst 5.11
    Video Card Resolution: 1024x576
    Video Render Type: VMR9
    Audio Card Model: NVIDIA(R) nForce(TM) Audio
    Audio Card Driver: 6.14.462.0
    Synopsis::

    Just installed latest CVS (14 January 01:09), ran 'start.bat', rebooted, and then ran 'MediaPortal Setup'. After prompting me twice to reconfigure my capture card I tried to do so but after a long time it comes back to say that it has failed to create the graph for this capture device. At that stage it has however identified the correct card, it just can't do anything with it. Lines from the error.log:

    14/01/2006 13:41:26 DVBGraphBDA: Unable to create graph Value does not fall within the expected range. at System.Runtime.InteropServices.Marshal.BindMoniker(IMoniker pmk, UInt32 grfOpt, Guid& iidResult, Object& ppvResult)
    at System.Runtime.InteropServices.Marshal.BindToMoniker(String monikerName)
    at MediaPortal.TV.Recording.DVBGraphBDA.CreateGraph(Int32 Quality)

    I also tried the CVS from 11 January and have the same issue. It seems quite a few people are having TV problems after the introduction of directshowlib 1.2 on the 9th of January, so I hope the MP team get to the bottom of this soon.

    In the meantime I've gone back to a CVS from 8 January and all is fine again.
     

    Jowda

    Portal Member
    October 26, 2005
    17
    0
    Denmark
    The same here

    Hi all

    Just tried the same, on my newly installed mediacenter, and i get the same result. "Failed to create graph" :(

    Was worried about my new mainboard could be the problem, but had no problem on the clean RC2 install. :D

    I'm Going back to a previous CVS, THNX for a great program and all your great work..

    :D
     

    AberDino

    MP Donator
  • Premium Supporter
  • February 17, 2005
    240
    28
    Kincardineshire
    Home Country
    Scotland Scotland
    I just tried the latest CVS (18 January 01:07), and still experience the same problem. Can this be escalated somehow so it is recognised as a bug? I don't mind performing some tests etc.
     

    dman_lfc

    Retired Team Member
  • Premium Supporter
  • July 28, 2004
    1,772
    30
    UK
    Home Country
    New Zealand New Zealand
    AberDino - post your full MediaPortal.log into the MP Pastebin area - http://mp.pastebin.com

    Autoper - no it's not the same bug it is very interesting that others can use the PVR-150 just fine...

    Jowda - Is it the same error message that you get in the log? If so what DVB-T card etc etc?

    DMAN
     

    AberDino

    MP Donator
  • Premium Supporter
  • February 17, 2005
    240
    28
    Kincardineshire
    Home Country
    Scotland Scotland
    Thanks for the response dman_lfc, I'll post the log tonight when I get home from work. Thanks for looking into this.
     

    dman_lfc

    Retired Team Member
  • Premium Supporter
  • July 28, 2004
    1,772
    30
    UK
    Home Country
    New Zealand New Zealand
    This is of concern...

    20/01/2006 19:53:40 DVBGraphBDA: Adding filter <TechnoTrend BDA/DVB-T Tuner> with moniker <@device:pnp:\\?\avstream#ptdvb_t#5&1794a94d&1&0#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{9b365890-165f-11d0-a195-0020afd156e4}>
    20/01/2006 19:53:43 DVBGraphBDA: Added filter <TechnoTrend BDA/DVB-T Tuner> with moniker <@device:pnp:\\?\avstream#ptdvb_t#5&1794a94d&1&0#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{9b365890-165f-11d0-a195-0020afd156e4}>

    It's taking 3 seconds to add the Technotrend DVB-T tuner to the graph - thats not good.

    Can you post the two similar lines from a working CVS build please.

    DMAN
     

    dman_lfc

    Retired Team Member
  • Premium Supporter
  • July 28, 2004
    1,772
    30
    UK
    Home Country
    New Zealand New Zealand
    Please also try tuning from the Wizard within the MediaPortal GUI

    DMAN
     

    AberDino

    MP Donator
  • Premium Supporter
  • February 17, 2005
    240
    28
    Kincardineshire
    Home Country
    Scotland Scotland
    DMAN,

    MediaPortal.log from working CVS can be found here. I started MediaPortal, activated My TV module, then exit MediaPortal. As far as I can see, the three second delay is also present in the working CVS. However, in the faulty CVS it seems to want to build the graph twice, and I don't know whether that is normal:
    20/01/2006 19:53:40 DVBGraphBDA:CreateGraph().
    20/01/2006 19:53:44 DVBGraphBDA:CreateGraph().
    The second time it goes wrong:
    20/01/2006 19:53:44 DVBGraphBDA: Adding filter <TechnoTrend BDA/DVB-T Tuner> with moniker <@device:pnp:\\?\avstream#ptdvb_t#5&1794a94d&1&0#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{9b365890-165f-11d0-a195-0020afd156e4}>
    20/01/2006 19:58:04 DVBGraphBDA: Unable to create graph Value does not fall within the expected range. at System.Runtime.InteropServices.Marshal.BindMoniker(IMoniker pmk, UInt32 grfOpt, Guid& iidResult, Object& ppvResult)
    at System.Runtime.InteropServices.Marshal.BindToMoniker(String monikerName)
    at MediaPortal.TV.Recording.DVBGraphBDA.CreateGraph(Int32 Quality)
    I'll try tuning from the MP GUI wizard later on today.

    Cheers
     

    Users who are viewing this thread

    Top Bottom