ffdshow for Mediaportal (1 Viewer)

[mamachan]

The best version of ffdshow codec for Mediaportal is always this??
https://www.team-mediaportal.com/files/Download/Codecs/Video/FFDSHOW-2004-10-12/

Thanks.
massimo

 

[FlipGer]

Hi,

personally I would recommend the ffdshow-tryouts:
http://ffdshow-tryout.sourceforge.net/

They have fixed many bugs and tweaked the overall performance. Its working on my machine without flaws.

We did recommend the old version because of problems getting postprocessing to work. But these problems were solved with the MP 0.2.2.0 release.

HTH,
Flip.

 

[mamachan]

Thanks.

hi.
massimo

 

[mamachan]

Hi,

personally I would recommend the ffdshow-tryouts:
http://ffdshow-tryout.sourceforge.net/

They have fixed many bugs and tweaked the overall performance. Its working on my machine without flaws.

We did recommend the old version because of problems getting postprocessing to work. But these problems were solved with the MP 0.2.2.0 release.

HTH,
Flip.

I installed this wersion of ffdshow. It work fine but not with postprocessing setting
http://www.projecthtpc.co.uk/software3.html
I try with purevideo codec, MPA an Dscaler but don't work (ffdshow start and the postprocessing too but the video is corrupt).

I can try somethings??
Hi,
massimo

 

[FlipGer]

Hi,

imho these settings are not 100% correct. You do not need to add "ffdshow raw video filter" and "ffdshow Video Decoder" to postprocessing. It should be enough to add only "ffdshow raw video filter". After adding this filter hit "Filter properties". As you can see these are somewhat different settings, than the ones shown in the guide. Choose "Codec" and set "all supported".

Be aware, that the ffdshow raw filter does not connect to MPA. I have it working with PureVideo.

Please use graphedit to check if all filters are set up correctly.

HTH,
Flip.

 

[mamachan]

Hi,

imho these settings are not 100% correct. You do not need to add "ffdshow raw video filter" and "ffdshow Video Decoder" to postprocessing. It should be enough to add only "ffdshow raw video filter". After adding this filter hit "Filter properties". As you can see these are somewhat different settings, than the ones shown in the guide. Choose "Codec" and set "all supported".

Be aware, that the ffdshow raw filter does not connect to MPA. I have it working with PureVideo.

Please use graphedit to check if all filters are set up correctly.

HTH,
Flip.

Thanks,
hi will try with this settings.
Hi
massimo

 

[mamachan]

Hi,

imho these settings are not 100% correct. You do not need to add "ffdshow raw video filter" and "ffdshow Video Decoder" to postprocessing. It should be enough to add only "ffdshow raw video filter". After adding this filter hit "Filter properties". As you can see these are somewhat different settings, than the ones shown in the guide. Choose "Codec" and set "all supported".

Be aware, that the ffdshow raw filter does not connect to MPA. I have it working with PureVideo.

Please use graphedit to check if all filters are set up correctly.

HTH,
Flip.

Thanks,
hi will try with this settings.
Hi
massimo

Sorry but don't work, ffdshow start but video is corrupt

 

[FlipGer]

Hi,

could you please make a screenshot?
Also try to turn of all processing in ffdshow besides the OSD. Still crappy picture? If not, try turning on on section by another.

Try using graphedit->connect to remote graph to check if the correct filters are used.

Please fill out the support template. What hardware do you use?

Flip.

 

[mamachan]

Hi,

could you please make a screenshot?
Also try to turn of all processing in ffdshow besides the OSD. Still crappy picture? If not, try turning on on section by another.

Try using graphedit->connect to remote graph to check if the correct filters are used.

Please fill out the support template. What hardware do you use?

Flip.

Hi, FlipGer
If i turn off all processing in ffdshow, it work fine but ONLY with divx/xvid/mpeg4/mpeg2 file, NOT with DVD (i use a resize 1366x768 in ffdshow, can be this the problem?).
I'm not be able to use graphedit

My HW:
Asus P5B Deluxe/Wifi AP
Intel Core 2 Duo E6400
Ram 2x512 533mhz dual channel
Asus 7600GS fanless 256mb
TVcard TT S2-3200
TVcard Jepssen Hybrid (like Hauppauge 1100)
Seasonic 430w
S/O: WinXP MCE 2005 rollup2

I will post a screenshot.

Thanks
Hi
massimo

 

[mamachan]

Hi,

could you please make a screenshot?
Also try to turn of all processing in ffdshow besides the OSD. Still crappy picture? If not, try turning on on section by another.

Try using graphedit->connect to remote graph to check if the correct filters are used.

Please fill out the support template. What hardware do you use?

Flip.

Hi FlipGer,
this are the screenshot:
View attachment 6509
View attachment 6510
View attachment 6511
View attachment 6512
View attachment 6513

Thanks
massimo