Hauppage Remote Control Plugin (1 Viewer)

[mPod]

I already made some deeper tests by extractiong the initialization routine
of the plugin to a small test program.

I don't know what you wanna proove here. The code is correct, it's only happening for PVR-150!!! If you would know how the Hauppauge stuff works, you'd realize how it's dealing with windows messages. So I'd suggest you stop reversing the code and tell us something about versions and revisions instead.

 

[RaabW]

I don't know what you wanna proove here. The code is correct, it's only happening for PVR-150!!! If you would know how the Hauppauge stuff works, you'd realize how it's dealing with windows messages. So I'd suggest you stop reversing the code and tell us something about versions and revisions instead.

I don't want to prove anything but as you already told us you don't have a
pvr-150 to test.
all I tried was to reconstruct the behaviour in a smaller environment.

If there is really a bug in the DRIVER (and not your plugin) of the
remote it would be great to have a description to find a workaround!

 

[mPod]

If there is really a bug in the DRIVER (and not your plugin) of the
remote it would be great to have a description to find a workaround!

Indeed, yes. But you didn't post your software/hardware revisions of your Hauppauge stuff yet... :wink:

And for your information: There is no official documentation from Hauppauge, only some internal docs from other devs, who were so kind and shared it with me. And the WM_TIMER event is raised all the time. If it is sending "IR_NOKEY", no button is being pressed. And that's the problem, the PVR-150 seems to send "IR_NOKEY" all the time, no matter if a button was pressed or not. This does not apply to any other Hauppauge card, so I really do think that it's some PVR-150 driver stuff. But as long as nobody will check older drivers, we can't be sure if that might be a workaround solution. Again: software version-/hardware revision-numbers might be useful in this case...

 

[webstalker]

I can't seem to find any older driver versions at the hauppauge site...
A search on google turned up this page though
http://drivers.softpedia.com/get/TV-Tuner-Co/Others/Hauppauge-WinTV-PVR-150-23c-WHQL.shtml
That seems to be a newer version than the one you can get at hauppauge?!
Anyone who can explain that?

I'll try it later to see if that changes anything

 

[webstalker]

hmm - the driver i mentioned seems to be for the MCE version...
Sorry for the confusion!

 

[ting]

pvr150 bug

I think i maybe have a few thoughts on this:

In the begining of february i had a problem with the ir driver, were "failed to initialize infrared" etc... error message appeared, and a reboot was nececarry to regain controll. The ir would stop working after a few minutes of use. A new driver, dated 04.02.2005 cleared up the problem.

These topics are about the problem:

http://www.hauppauge.co.uk/board/showthread.php?t=1761&page=1&pp=10



http://www.shspvr.com/forum/viewtopic.php?t=6703&postdays=0&postorder=asc&start=0



To sum it up, I think hauppauge changed the function which mpod mentioned in his post with the "IR_NOKEY" frase. I think this is a hauppauge work around or something.
I konow nothing about programming, but I think this command keeps the remote in focus.



Anyway: My sugestion to other pvr150 users:

For those who do NOT have an nforce based motherboard: use drivers dated before 04.02.2005.

*(hauppauge’s system of driver naming is rather weird, so im mentioning the date as stated in the device properties)

If It works, post it, and perhaps mpod cand find a “work around” for the “work around”…. :?

 

[plaxus]

I've tried the HCWPlugin_0.0.0.5_D3 plugin, NOT working.

System: XP sp2 English - FX5200 driver 66.93 - Nforce2 board 5.10 drivers.
MP 0.1.1.1 , Hauppauge 45 button remote;
hcw2_2_22292pp2.exe
ir32_245_22350.exe

 

[mPod]

I've tried the HCWPlugin_0.0.0.5_D3 plugin, NOT working.

The "D" versions are not made for working, they are made for Debugging, as states several times!

 

[tremebundo]

Hi mpod,

This is what I get with the new debug version HCWPlugin_0.0.0.5_D4:

11/04/2005 22:30:19 running...
11/04/2005 22:30:19 Mediaportal.OnStartup()
11/04/2005 22:30:19 Recorder: Loading capture cards from capturecards.xml
11/04/2005 22:30:19 Recorder: card:1 video device:Hauppauge WinTV PVR PCI II Capture TV:True record:True priority:1
11/04/2005 22:30:19 PlugInManager.Load()
11/04/2005 22:30:19 Load plugins from lugins\process\HCWPlugin.dll
11/04/2005 22:30:19 Load plugins from lugins\process\ProcessPlugins.dll
11/04/2005 22:30:19 PlugInManager.Start()
11/04/2005 22:30:19 HCW: 0.0.0.5_D4
11/04/2005 22:30:20 HCW: Terminating external control: attempt #1
11/04/2005 22:30:21 HCW: Internal control enabled
11/04/2005 22:30:22 open folderdatabase
11/04/2005 22:30:22 HCW: Raw : 8191
11/04/2005 22:30:22 HCW: Remote : 31
11/04/2005 22:30:22 HCW: ButtonCode: 63
11/04/2005 22:30:22 HCW: Raw : 8191
11/04/2005 22:30:22 HCW: Remote : 31
11/04/2005 22:30:22 HCW: ButtonCode: 63
11/04/2005 22:30:22 HCW: Raw : 8191
11/04/2005 22:30:22 HCW: Remote : 31
11/04/2005 22:30:22 HCW: ButtonCode: 63
11/04/2005 22:30:23 HCW: Raw : 8191
11/04/2005 22:30:23 HCW: Remote : 31
11/04/2005 22:30:23 HCW: ButtonCode: 63
11/04/2005 22:30:23 HCW: Raw : 8191
11/04/2005 22:30:23 HCW: Remote : 31
11/04/2005 22:30:23 HCW: ButtonCode: 63
11/04/2005 22:30:23 HCW: Raw : 8191
11/04/2005 22:30:23 HCW: Remote : 31
11/04/2005 22:30:23 HCW: ButtonCode: 63
11/04/2005 22:30:23 HCW: Raw : 8191
11/04/2005 22:30:23 HCW: Remote : 31
11/04/2005 22:30:23 HCW: ButtonCode: 63
11/04/2005 22:30:23 HCW: Raw : 8191
11/04/2005 22:30:23 HCW: Remote : 31
11/04/2005 22:30:23 HCW: ButtonCode: 63
11/04/2005 22:30:24 HCW: Raw : 8191
11/04/2005 22:30:24 HCW: Remote : 31
11/04/2005 22:30:24 HCW: ButtonCode: 63
11/04/2005 22:30:24 HCW: Raw : 8191
11/04/2005 22:30:24 HCW: Remote : 31
11/04/2005 22:30:24 HCW: ButtonCode: 63
11/04/2005 22:30:24 HCW: Raw : 8191
11/04/2005 22:30:24 HCW: Remote : 31
11/04/2005 22:30:24 HCW: ButtonCode: 63
11/04/2005 22:30:24 HCW: Raw : 8191
11/04/2005 22:30:24 HCW: Remote : 31
11/04/2005 22:30:24 HCW: ButtonCode: 63
11/04/2005 22:30:24 HCW: Raw : 8191
11/04/2005 22:30:24 HCW: Remote : 31
11/04/2005 22:30:24 HCW: ButtonCode: 63
11/04/2005 22:30:25 HCW: Raw : 8191
11/04/2005 22:30:25 HCW: Remote : 31
11/04/2005 22:30:25 HCW: ButtonCode: 63
11/04/2005 22:30:25 HCW: Raw : 8191
11/04/2005 22:30:25 HCW: Remote : 31
11/04/2005 22:30:25 HCW: ButtonCode: 63
11/04/2005 22:30:25 HCW: Raw : 8191
11/04/2005 22:30:25 HCW: Remote : 31
11/04/2005 22:30:25 HCW: ButtonCode: 63
11/04/2005 22:30:25 HCW: Raw : 8191
11/04/2005 22:30:25 HCW: Remote : 31
11/04/2005 22:30:25 HCW: ButtonCode: 63
11/04/2005 22:30:25 HCW: Raw : 8191
11/04/2005 22:30:25 HCW: Remote : 31
11/04/2005 22:30:25 HCW: ButtonCode: 63
11/04/2005 22:30:26 Mediaportal.OnExit()
11/04/2005 22:30:26 Card:1 stop
11/04/2005 22:30:26 PlugInManager.Stop()
11/04/2005 22:30:26 HCW: Enabling external control
11/04/2005 22:30:26 Mediaportal.OnExit()
11/04/2005 22:30:26 MediaPortal done

I have just started MP and then closed it. Any button was pressed. If fact, the remote was in another room.

Hope this helps.

 

[TheBoss93]

Hi Mr Mpod,

i try a lot of thing.
Re-install my drivers.
Install english drivers and english applications.

But this remote still don't want to work.

My config :
XP SP2 French
Net framework updated
H PVR 150 + Remote 45 But with the latest frivers from h.com.
All the latest drivers for the PVR from H.com
Radeon X800XT PE VIVO drivers catalyst are the latest.
All is working with H Software but nothing with MP.

Is it the real world or i'm dreaming ?

thanks 4 all Mpod. I know you are working on it.