Hauppauge Nexus DVB-s support? (1 Viewer)

M

mactas

New Member
September 3, 2006
3
0
48
Hi folks,

is there still no support for my Hauppauge Nexus DVB-s card on MediaPortal?

Thx,

mactas
 
ronilse

ronilse

Retired Team Member
  • Premium Supporter
    • July 19, 2005
    4,422
    283
    Moss
    Home Country
    Norway Norway
    Hi & welcome to MediaPortal forum.
    If your card it's not listed here or you have one & it can't be recognised in MediaPortal, use this post to get it supported.

    Regards
    Roy
     
    M

    mactas

    New Member
    September 3, 2006
    3
    0
    48
    Hi,

    well, MediaPortal seems to recognize it somehow. It shows a TechniSat (or TechnoTrend) Premium Card which is identical to my Hauppauge Nexus-s. But I do not know how to scan for some channels.

    So long,
    mactas
     
    M

    mactas

    New Member
    September 3, 2006
    3
    0
    48
    That's too bad. So I'll have try running MythTV on my Linux-Box. And this piece of software is realy hard to setup :(
     

    Users who are viewing this thread

    Online now: 2 (members: 0, guests: 2)

    Similar threads

    B
    MP1 MP2 An installation report - older hardware and why I used 1.33 not 1.38 DE
    4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0 on Windows 7 SP1
    4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0...
    My TV PC is more a cast-off on older hardware (a 'Quiet PC' i5 4690, 16GB ram, 2xSSD 1xHDD, system graphics), mainly as a cheap way...
    Replies
    5
    Views
    2K
    el Filou
    el Filou
    E
    MP1 MP2 Anyone using SiliconDust HDHomeRun Flex Quatro 4? DE
    I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network. Hauppauge card retired long ago. I have also retired very early SD units, the Quatros seem to work much better than the older units. Go to SD's support website and download and install the windows...
    I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network...
    I am currently using a Hauppauge WinTV QuadHD PCIe card on MP1 (1.37) for DVB-T, but 2 of the tuners have died. Thinking about...
    Replies
    3
    Views
    1K
    tarrow
    T
    AberDino
    MP1 MP2 1.36 TBS - Subchannels - All Cards Busy DE
    Perhaps... Only way to confirm would be for me to invest in a different USB DVB-S2 tuner (like the Hauppauge WinTV-NOVA-S2), which I might do if the issue persists.
    Perhaps... Only way to confirm would be for me to invest in a different USB DVB-S2 tuner (like the Hauppauge WinTV-NOVA-S2), which...
    I have a dedicated TV Server x64 v1.36 running on Windows 11, with a Hauppauge WinTV-dualHD tuner for DVB-T channels (Freeview) and...
    Replies
    8
    Views
    3K
    AberDino
    AberDino
    S
    MP1 MP2 Mediaportal in a virtual machine - virtualbox DE
    Are the media/video folders on the Mint host?
    Are the media/video folders on the Mint host?
    I've used Mediaportal for years on a Windows Host with restricted online-access. Lately I reinstalled...
    Replies
    1
    Views
    1K
    TLD
    TLD
    E
    MP1 MP2 TBS6281 only showing cable, not DVB-T/T2 DE
    Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download page, there was an additional item called "TBS6281se V2 Change Mode Tool". There was zero documentation to accompany this. I downloaded it and ran it. It is a tool to detect the current run state of both...
    Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download...
    My previous TBS PCI-E card failed, so I bought another one. The model I chose is the TBS 6181-SE, which can be seen on Amazon here...
    Replies
    2
    Views
    1K
    EuroSong
    E

    About The Project

    The vision of the MediaPortal project is to create a free open source media centre application, which supports all advanced media centre functions, and is accessible to all Windows users.

    In reaching this goal we are working every day to make sure our software is one of the best.

             

    Quick Navigation

    Support MediaPortal!

    The team works very hard to make sure the community is running the best HTPC-software. We give away MediaPortal for free but hosting and software is not for us.

    Care to support our work with a few bucks? We'd really appreciate it!

    Community platform by XenForo® © 2010-2021 XenForo Ltd.
    Top Bottom