[WiP] madVR support in MP1 (16 Viewers)

[edterbak]

Did you try in EVR madVR is ok

I disabled MadVR, enabled DRC on MP again.
Below the results.


No issues here. everything smooth. Did a dvd, various other files. Cant find anything wrong. No black screen in any situation.
This is all done with this installer:
MediaPortalSetup_1.15.100-903-g547fa37_(MP1-4781V4_madVR_based_master_branch)_for_TESTING_ONLY_2017-03-20-20-00

It is concerning DaWonky is having an issue. Might be a quirk, but if its not....

 

[daWooky]

it looks good on your screens but to be safe ^^ u need to play something definitely not 25p before the bad file... thanks for testing.

I'll try evr again tomorrow as well...

 

[Sebastiii]

Hi guys

Will add a new installer based on master in first post (close to be 1.16 Final) : based on this : MP1-4781V5_madVR_based_master

 

[Sebastiii]

Added in first post

 

[joecrow]

OK I will give the new v295 core a try but have no idea about graphstudio, have downloaded and installed it but have yet to figure out how to operate, any hints would be welcome.

 

[Sebastiii]

I have unpack graphstudio in : D:\Utils\Graphstudio
We need to register the proppage.dll, to do this :
You need to open a command prompt with admin right and type the command :
regsvr32 proppage.dll (in D:\Utils\Graphstudio path) or this : regsvr32 "D:\Utils\Graphstudio\proppage.dll"
Then when playing something on MP, you start graphstudio and do ctrl+g (to connect to a remote graph) and you will see all directshow codec in the graph

EDIT : Attached is my version.

 

[joecrow]

OK graphstudio is up and running, many thanks. Will start testing later.

 

[daWooky]

hi seb,
the latest master merge version running pretty good so far
and i finally had time to look at the evr 25i problem again
i should have looked at my log files more deeply sooner... damned, but luckily i think i found the reason for the wrong rate switch.
the default mepo mediainfo.dll seems unable to obtain the right refresh rate successful from some files

default mepo mediainfo 7.69 = file gets detected as FrameRate: 0

Spoiler: infodll v0.7.69

[2017-04-02 17:22:57,695] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: DLL Version : MediaInfoLib - v0.7.69
[2017-04-02 17:22:57,695] [Log ] [MPMain ] [INFO ] - MediaInfoWrapper.MediaInfoWrapper: Inspecting media : \\)test samples\sd hd\[F5. FHD i] history_chan_hd_sample_interlaced.mkv
[2017-04-02 17:22:57,696] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: Parse speed : 0.3
[2017-04-02 17:22:57,696] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: FrameRate : 0
[2017-04-02 17:22:57,696] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: Width : 1920
[2017-04-02 17:22:57,696] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: Height : 1080
[2017-04-02 17:22:57,696] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: AspectRatio : widescreen
[2017-04-02 17:22:57,696] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: VideoCodec : AVC [ "avc.png" ]
[2017-04-02 17:22:57,697] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: Scan type : interlaced
[2017-04-02 17:22:57,697] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: IsInterlaced : True
[2017-04-02 17:22:57,697] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: VideoResolution : 1080I
[2017-04-02 17:22:57,697] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: VideoDuration : 0
[2017-04-02 17:22:57,697] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: AudioRate : 48000
[2017-04-02 17:22:57,697] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: AudioChannels : 2 [ "stereo.png" ]
[2017-04-02 17:22:57,697] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: AudioCodec : MPEG AUDIO VERSION 1 LAYER 2 [ "mpeg audio version 1 layer 2.png" ]
[2017-04-02 17:22:57,698] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: HasAudio : True
[2017-04-02 17:22:57,698] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: HasVideo : True
[2017-04-02 17:22:57,698] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: HasSubtitles : False
[2017-04-02 17:22:57,698] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: NumSubtitles : 0

so i tried again with latest info.dll to = file gets detected as FrameRate: 25

Spoiler: infodll v0.7.94

[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: DLL Version : MediaInfoLib - v0.7.94
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [INFO ] - MediaInfoWrapper.MediaInfoWrapper: Inspecting media : \\)\test samples\sd hd\[F5. FHD i] history_chan_hd_sample_interlaced.mkv
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: Parse speed : 0.3
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: FrameRate : 25
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: Width : 1920
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: Height : 1080
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: AspectRatio : widescreen
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: VideoCodec : AVC [ "avc.png" ]
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: Scan type : interlaced
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: IsInterlaced : True
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: VideoResolution : 1080I
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: VideoDuration : 105640
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: AudioRate : 48000
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: AudioChannels : 2 [ "stereo.png" ]
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: AudioCodec : MPEG AUDIO VERSION 1 LAYER 2 [ "mpeg audio version 1 layer 2.png" ]
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: HasAudio : True
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: HasVideo : True
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: HasSubtitles : False
[2017-04-02 17:30:55,716] [Log ] [MPMain ] [DEBUG] - MediaInfoWrapper.MediaInfoWrapper: NumSubtitles : 0

tortured evr a bit further on two clients with latest mepo mad and on the old 1.15final both with the new .dll version -finally the rate change always working right again, all works as it should so far even the quirkiest files...
may the team considering updating the info.dll for final release??
cheers

 

[edterbak]

may the team considering updating the info.dll for final release??

I say Aye.

 

[Sebastiii]

Thanks guys
I remember that we have done an update but somehow it has broken the .TS files but i think now the latest version looks ok.
We can always create a Jira for next pre-release version