[WiP] madVR support in MP1 (16 Viewers)

[alexdepalma]

No changes on mine


Force MP windows refresh (for 3D) didn't help. I couldn't see that refresh visually.

 

[Sebastiii]

It's amazing
I can see the quick refresh/blink here.

 

[joecrow]

Hi
I've been playing with the DVBT2 HEVC package over the last few days, which is now looking very good, and have somewhat lost track of where things are here. I'm still on V123/4 (working great) and it looks like most newer versions are relating to problems with nvidia and 3D. Please let me know if there is still anything I can test (amd graphics) etc

 

[Kotik]

Something strange regarding a start up of a NON 3D movie.

If I set LAV Video to DXVA Native then I get no Audio and a black screen, if I set LAV Video to DXVA Copy Back then everything is fine.

TV is working fine no matter the settings.

Tests were done with V134.

Attached are logs with (1) DXVA Native and logs with (2) DXVA Copy Back.

 

[Sebastiii]

Hi

From DXVA Native :

[2016-07-12 01:38:57,271] [       0] [1318] - MadSubtitleProxy::SetDevice() device : 0x:1072b160
[2016-07-12 01:38:57,784] [       0] [1318] - MadSubtitleProxy::Render() SetNewDevice for D3D and subtitle : 0x:1072b160
[2016-07-12 01:38:59,255] [       0] [1318] - MadSubtitleProxy::SetDevice() device : 0x:0
[2016-07-12 01:39:00,139] [       0] [  58] - MadSubtitleProxy::SetDevice() device : 0x:0
[2016-07-12 01:39:05,181] [       0] [ 300] - MPMadPresenter::OsdSetRenderCallback
[2016-07-12 01:39:05,181] [       0] [ 300] - MPMadPresenter::SetDevice() pD3DDev : 0x:1072b160
[2016-07-12 01:39:05,360] [       0] [13e0] - MadSubtitleProxy::SetDevice() device : 0x:0
[2016-07-12 01:39:05,502] [       0] [ d40] - MadSubtitleProxy::SetDevice() device : 0x:0
[2016-07-12 01:39:05,642] [       0] [ ecc] - MadSubtitleProxy::SetDevice() device : 0x:0
[2016-07-12 01:39:05,772] [       0] [1198] - MadSubtitleProxy::SetDevice() device : 0x:0
[2016-07-12 01:39:05,897] [       0] [ 888] - MadSubtitleProxy::SetDevice() device : 0x:0

We can see here that madVR reset the D3D device (SetDevice() device : 0x:0) but i didn't succeed to react on this (it reset it because it's needed and because something is not ready etc.)

From DXVA Copy Back :

[2016-07-12 01:40:10,600] [       0] [ 9fc] - MadSubtitleProxy::SetDevice() device : 0x:10a97880
[2016-07-12 01:40:10,698] [       0] [ 9fc] - MadSubtitleProxy::Render() SetNewDevice for D3D and subtitle : 0x:10a97880
[2016-07-12 01:40:10,704] [       0] [ 150] - MPMadPresenter::OsdSetRenderCallback
[2016-07-12 01:40:10,704] [       0] [ 150] - MPMadPresenter::SetDevice() pD3DDev : 0x:10a97880

This is correct because madVR didn't need to reset something.

The reset happen for sure when it's 3D movie or when going from 3D to 2D for ex.

If we can react to that it's would be great.

From what i'm thinking, when madVR reset the device, we need to render something (black or whatever) to let madVR recreate the device. But we already set the OSD callback and then a second callback in the same instance lead to crash. So don't know how to do

 

[Kotik]

But i also got some good news. Yesterday all evening i was zapping TV (more than 100 different zaps) and i was using DXVA Native and i could not reproduce DXVA Failed.
So right now TV for me is very stable.
It is actualy so stable that i am sometimes not sure if i use EVR or madVR
So good job Sebastiii.
Regarding DXVA Native and the black screen, i dont remember that i had this issue before. It is fresh, cause i remember with older builds Video was stable but TV was not.

 

[joecrow]

Now running v134 and have run into a problem with OV. An ITV catchup vid plays in small window in upper left corner, see screenshot, please note it failed consistently with this vid. others worked OK as did all live and bbc catchup content I tried. I could recover by going to windowed mode where, video was playing, hit stop, blackscreen, switch to fullscreen mode and I come back to menu. Also attached are logs for 2 failed attempts to play this video with a sucessfull playing of another vid. in this rubrick, in between the 2 failures, also madvr freeze report.

 

[daWooky]

hi guys
had a bit time for testing again but didn't came far


seems like tv deinterlacing don't gets detected right anymore

the not interlacing problem occurs if tv starts on a not interlaced programm first tune and switch to a channel with deinterlacing -> deinterlacing goes off (framerate) and stays off on all following channels with deinterlaced streams -only restart tv helps.
the funny thing is if started on a deinterlaced channel first the detection is working right if zapping non interlaced to deinterlaced

i reverted back to v115 - interlacing works in both directions as before (btw. my favourite version so far, even with 3d after i fixed my selfmade detection problems)
v116 seems unaffected, but all other versions after the v117 Core change are affected.

@alexdepalma about your mouse wiggle 3d toggle problem imma getting curious: what manufacturer is the mouse from? ya set up drivers for it? do u use input aids (maybe some accidental set windows features)?

cheers guys and thanks anyway seb

 

[edterbak]

[offtopic]
Lol...
based on the image, I see something gets detected....
Of all the screenshots in the universe, you choose this one to attach. Ghehehe...

 

[alexdepalma]

mouse wiggle 3d toggle problem imma getting curious: what manufacturer is the mouse from? ya set up drivers for it? do u use input aids (maybe some accidental set windows features

Yes, I already tried with kb and mouse disconnected. That's driven me crazy... MPC-HC happens the same.