MediaPortal SVN-Snapshot:-08-01-2008 19-31h - Revision:19843.rar (1 Viewer)

Paranoid Delusion

Moderation Manager
  • Premium Supporter
  • June 13, 2005
    13,062
    2,978
    Cheshire
    United Kingdom United Kingdom
    There seems to be a issue with MP and MySQL setups, gibman has fixed this, its just waiting for him to release.

    Not sure whether this may be related to any of the above problems, if you happen to be running MySQL.
     

    grubi

    Portal Pro
    June 16, 2007
    1,216
    80
    127.0.0.1
    Germany Germany
    There seems to be a issue with MP and MySQL setups, gibman has fixed this, its just waiting for him to release.

    Not sure whether this may be related to any of the above problems, if you happen to be running MySQL.
    I'm running MSSQL so could not be the cause of the hibernation/resume problem. RC2 non SVN works fine.

    grubi.
     

    fremel

    Portal Member
    April 21, 2007
    18
    4
    Hi guys
    Never posted here before so be kind

    im having this problem since first svn on rc2

    the problem is with the tv server

    i enter tv and start it
    then i try to enter fullscreen but that never happens
    so i try to stop the timeshift but then it only starts over from where i began watching
    escape to homescreen where the tv is still overlayed

    i have recreated tvdatabase no differance (im using mysql)
    tried with bluetwo wide, monochrome
    with preload and without
    different codecs

    View attachment 23734

    thx for your great effort

    Did a reinstall and used mssql this time but my problems are the same :(
     

    markius

    Portal Pro
    December 26, 2006
    175
    4
    Maidstone, UK
    England England
    Since the last SVN when Hibernating my system overnight & the system needs to wake up again, MediaPortal does not start up (seems there is an issue with the TV service & powerscheduler possibly)
    I am seeing the same problem also. In the log snippet below the system should wake up to record a show at 20:25. As nielk says, it seems that the system correctly wakes up but the TvServer does not re-init.

    I'm using MSSQL and RC2 SVN 19843. It may not be important but I manually added the "preload" field to the Card table in the database before I could get the TvService to load - I did not use the updated tvlibrary.dll

    I'll try and gather full logs tomorrow... it's late here!

    Cheers
    Mark

    Code:
    2008-08-04 19:42:40.543353 [8]: PowerScheduler.DisAllowShutdown: handler EpgGrabbingHandler wants to prevent standby
    2008-08-04 19:43:07.809502 [EPG Update thread]: EPG: database updated for #8 Clyde 1
    2008-08-04 19:43:07.809502 [EPG Update thread]: user:epg remove
    2008-08-04 19:43:07.809502 [EPG Update thread]: tvcard:FreeSubChannel:1 #0
    2008-08-04 19:43:07.809502 [EPG Update thread]: DVB subch:0 Decompose()
    2008-08-04 19:43:07.809502 [EPG Update thread]: tvcard:FreeAllSubChannels:
    2008-08-04 19:43:07.809502 [EPG Update thread]: dvb:StopGraph
    2008-08-04 19:43:07.825127 [EPG Update thread]: Stopcard
    2008-08-04 19:43:07.825127 [EPG Update thread]: tvcard:FreeAllSubChannels:
    2008-08-04 19:43:16.075286 [12]: PowerScheduler: User input detected at 04/08/2008 19:06:33
    2008-08-04 19:43:40.435128 [4]: PowerScheduler: User input detected at 04/08/2008 19:06:33
    2008-08-04 19:43:40.435128 [4]: PowerScheduler: lastUserTime: 19:06:33.5921 , True
    2008-08-04 19:43:40.560131 [4]: PowerScheduler.NextWakeupTime: inspecting handler:GenericWakeupHandler time:31/12/9999 23:59:59
    2008-08-04 19:43:41.263269 [4]: PowerScheduler.NextWakeupTime: inspecting handler:ScheduledRecordingsHandler time:04/08/2008 20:25:00
    2008-08-04 19:43:41.263269 [4]: PowerScheduler.NextWakeupTime: inspecting handler:EpgGrabbingHandler time:05/08/2008 19:00:00
    2008-08-04 19:43:41.294520 [4]: PowerScheduler.NextWakeupTime: inspecting handler:PowerSchedulerClientPlugin time:31/12/9999 23:59:59
    2008-08-04 19:43:41.310145 [4]: PowerScheduler: System changed from busy state to idle state
    2008-08-04 19:43:41.325770 [4]: PowerScheduler: User input detected at 04/08/2008 19:06:33
    2008-08-04 19:43:41.325770 [4]: PowerScheduler: lastUserTime: 19:06:33.5921 , True
    2008-08-04 19:43:41.325770 [4]: PowerScheduler: System is unattended and idle - initiate suspend/hibernate
    2008-08-04 19:43:41.325770 [4]: PowerScheduler: Manual system suspend requested by 
    2008-08-04 19:43:41.341396 [4]: PowerScheduler: Entering shutdown Hibernate ; forced: False -- kick off shutdown thread
    2008-08-04 19:43:41.372646 [Powerscheduler Suspender]: PowerScheduler: Shutdown thread is running: Hibernate, force: False
    2008-08-04 19:43:41.372646 [Powerscheduler Suspender]: PowerScheduler: Informing handlers about UserShutdownNow
    2008-08-04 19:43:41.497649 [Powerscheduler Suspender]: PowerScheduler.NextWakeupTime: inspecting handler:GenericWakeupHandler time:31/12/9999 23:59:59
    2008-08-04 19:43:41.841405 [Powerscheduler Suspender]: PowerScheduler.NextWakeupTime: inspecting handler:ScheduledRecordingsHandler time:04/08/2008 20:25:00
    2008-08-04 19:43:41.841405 [Powerscheduler Suspender]: PowerScheduler.NextWakeupTime: inspecting handler:EpgGrabbingHandler time:05/08/2008 19:00:00
    2008-08-04 19:43:41.857031 [Powerscheduler Suspender]: PowerScheduler.NextWakeupTime: inspecting handler:PowerSchedulerClientPlugin time:31/12/9999 23:59:59
    2008-08-04 19:43:41.857031 [Powerscheduler Suspender]: PowerScheduler: Shutdown is allowed True ; forced: False
    2008-08-04 19:43:41.857031 [Powerscheduler Suspender]: PowerScheduler.NextWakeupTime: inspecting handler:GenericWakeupHandler time:31/12/9999 23:59:59
    2008-08-04 19:43:42.169537 [Powerscheduler Suspender]: PowerScheduler.NextWakeupTime: inspecting handler:ScheduledRecordingsHandler time:04/08/2008 20:25:00
    2008-08-04 19:43:42.169537 [Powerscheduler Suspender]: PowerScheduler.NextWakeupTime: inspecting handler:EpgGrabbingHandler time:05/08/2008 19:00:00
    2008-08-04 19:43:42.169537 [Powerscheduler Suspender]: PowerScheduler.NextWakeupTime: inspecting handler:PowerSchedulerClientPlugin time:31/12/9999 23:59:59
    2008-08-04 19:43:42.263288 [Powerscheduler Suspender]: PowerScheduler.NextWakeupTime: inspecting handler:GenericWakeupHandler time:31/12/9999 23:59:59
    2008-08-04 19:43:42.622670 [Powerscheduler Suspender]: PowerScheduler.NextWakeupTime: inspecting handler:ScheduledRecordingsHandler time:04/08/2008 20:25:00
    2008-08-04 19:43:42.622670 [Powerscheduler Suspender]: PowerScheduler.NextWakeupTime: inspecting handler:EpgGrabbingHandler time:05/08/2008 19:00:00
    2008-08-04 19:43:42.622670 [Powerscheduler Suspender]: PowerScheduler.NextWakeupTime: inspecting handler:PowerSchedulerClientPlugin time:31/12/9999 23:59:59
    2008-08-04 19:43:42.669546 [Powerscheduler Suspender]: PowerScheduler: Set wakeup timer to wakeup system in 40.2896221533333 minutes
    2008-08-04 19:43:42.669546 [Powerscheduler Suspender]: PowerScheduler: Entering shutdown Hibernate ; forced: False
    2008-08-04 19:43:42.794549 [WinController exit thread]: WindowsController: Performing ExitWindows Hibernate, force: False
    2008-08-04 19:43:43.419561 [PowerEventThread]: TV service PowerEventThread 49391
    2008-08-04 19:43:43.919570 [PowerEventThread]: OnPowerEvent: PowerStatus: QuerySuspend
    2008-08-04 19:43:43.997697 [PowerEventThread]: PowerScheduler: System wants to enter standby (query)
    2008-08-04 19:43:46.122125 [12]: PowerScheduler: UnregisterRemote StandbyHandler 1
    2008-08-04 19:43:46.122125 [12]: PowerScheduler: UnregisterRemote WakeupHandler 1
    2008-08-04 19:43:46.153375 [PowerEventThread]: OnPowerEvent: PowerStatus: Suspend
    2008-08-04 19:43:46.153375 [PowerEventThread]: PowerScheduler: System is going to standby
    2008-08-04 19:43:46.153375 [PowerEventThread]: Controller: epg stop
    2008-08-04 19:43:46.169000 [PowerEventThread]: PowerScheduler: Stopping TVController
    2008-08-04 19:43:46.169000 [PowerEventThread]: Controller: DeInit.
    2008-08-04 19:43:46.169000 [PowerEventThread]: Controller: HeartBeat monitor stopped...
    2008-08-04 19:43:46.200250 [PowerEventThread]: plugin: ConflictsManager stopped
    2008-08-04 19:43:46.262750 [PowerEventThread]: PowerScheduler: UnRegistered PowerScheduler as PowerEventHandler to tvservice
    2008-08-04 19:43:46.262750 [PowerEventThread]: PowerScheduler: Removed default set of standby/resume handlers to PowerScheduler
    2008-08-04 19:43:46.262750 [PowerEventThread]: Powerscheduler: stopped
    2008-08-04 19:43:46.262750 [PowerEventThread]: Controller: stop streamer...
    2008-08-04 19:43:46.294000 [PowerEventThread]: RTSP: stop streamer
    2008-08-04 19:43:46.294000 [PowerEventThread]: RTSP: stop all streams (0)
    2008-08-04 19:43:46.294000 [PowerEventThread]: Controller: streamer stopped...
    2008-08-04 19:43:46.294000 [PowerEventThread]: Controller: stop scheduler...
    2008-08-04 19:43:46.294000 [PowerEventThread]: Scheduler: stopped
    2008-08-04 19:43:46.294000 [PowerEventThread]: Controller: scheduler stopped...
    2008-08-04 19:43:46.294000 [PowerEventThread]: Controller: stop epg grabber...
    2008-08-04 19:43:46.294000 [PowerEventThread]: Controller: epg stopped...
    2008-08-04 19:43:46.294000 [PowerEventThread]: Controller: dispose card:Cinergy 2400i DT Tuner 1
    2008-08-04 19:43:46.403375 [PowerEventThread]: dvb:Decompose
    2008-08-04 19:43:46.403375 [PowerEventThread]: tvcard:FreeAllSubChannels:
    2008-08-04 19:43:46.403375 [PowerEventThread]:   stop
    2008-08-04 19:43:46.840875 [PowerEventThread]:   remove all filters
    2008-08-04 19:43:46.934625 [PowerEventThread]:   free...
    2008-08-04 19:43:46.934625 [PowerEventThread]:   free pins...
    2008-08-04 19:43:46.950250 [PowerEventThread]:   free graph...
    2008-08-04 19:43:46.997125 [PowerEventThread]:   free devices...
    2008-08-04 19:43:47.012750 [PowerEventThread]:   decompose done...
    2008-08-04 19:43:47.012750 [PowerEventThread]: Controller: dispose card:Cinergy 2400i DT Tuner 2
    2008-08-04 19:43:47.012750 [PowerEventThread]: dvb:Decompose
    2008-08-04 19:43:47.012750 [PowerEventThread]: tvcard:FreeAllSubChannels:
    2008-08-04 19:43:47.012750 [PowerEventThread]:   stop
    2008-08-04 19:43:47.481500 [PowerEventThread]:   remove all filters
    2008-08-04 19:43:47.512750 [PowerEventThread]:   free...
    2008-08-04 19:43:47.512750 [PowerEventThread]:   free pins...
    2008-08-04 19:43:47.528375 [PowerEventThread]:   free graph...
    2008-08-04 19:43:47.528375 [PowerEventThread]:   free devices...
    2008-08-04 19:43:47.528375 [PowerEventThread]:   decompose done...
    2008-08-04 19:43:47.528375 [PowerEventThread]: Controller: dispose card:Nebula DigiTV PCI BDA Tuner Filter
    2008-08-04 19:43:47.528375 [PowerEventThread]: dvb:Decompose
    2008-08-04 19:43:47.528375 [PowerEventThread]: tvcard:FreeAllSubChannels:
    2008-08-04 19:43:47.528375 [PowerEventThread]:   stop
    2008-08-04 19:43:47.559625 [PowerEventThread]:   remove all filters
    2008-08-04 19:43:47.559625 [PowerEventThread]:   free...
    2008-08-04 19:43:47.575250 [PowerEventThread]:   free pins...
    2008-08-04 19:43:47.590875 [PowerEventThread]:   free graph...
    2008-08-04 19:43:47.590875 [PowerEventThread]:   free devices...
    2008-08-04 19:43:47.590875 [PowerEventThread]:   decompose done...
    2008-08-04 19:43:47.590875 [PowerEventThread]: Controller: dispose card:RadioWebStream Card (builtin)
    2008-08-04 19:43:47.606500 [PowerEventThread]: RadioWebStream:Dispose()
    2008-08-04 19:43:47.606500 [PowerEventThread]: PowerScheduler.NextWakeupTime: inspecting handler:EpgGrabbingHandler time:05/08/2008 19:00:00
    2008-08-04 19:43:47.606500 [PowerEventThread]: PowerScheduler: new next wakeup time 05/08/2008 19:00:00 found by EpgGrabbingHandler
    2008-08-04 19:43:47.637750 [PowerEventThread]: PowerScheduler.NextWakeupTime: inspecting handler:EpgGrabbingHandler time:05/08/2008 19:00:00
    2008-08-04 19:44:06.153375 [PowerEventThread]: TV service PowerEventThread 30
    2008-08-04 19:44:06.153375 [PowerEventThread]: TV service PowerEventThread 30
    2008-08-04 20:24:20.984375 [PowerScheduler Waiter]: PowerScheduler: OnResume
    2008-08-04 20:24:27.171875 [PowerEventThread]: TV service PowerEventThread 30
    2008-08-04 20:24:27.296875 [PowerEventThread]: OnPowerEvent: PowerStatus: ResumeSuspend
    2008-08-04 20:24:27.328125 [PowerEventThread]: OnPowerEvent: PowerStatus: ResumeAutomatic
    2008-08-04 20:24:27.921875 [WinController exit thread]: WindowsController: ExitWindows performed, result: True
    2008-08-04 20:24:27.937500 [PowerEventThread]: TV service PowerEventThread 30
    2008-08-04 20:24:28.062500 [PowerEventThread]: TV service PowerEventThread 49391
    2008-08-04 20:24:49.328125 [19]: PowerScheduler: RegisterRemote tag: 2, uris: http://localhost:31458/2bd89f42_{snip}_1.rem, http://localhost:31458/2bd89f42_{snip}_1.rem
    2008-08-04 20:25:14.343750 [19]: PowerScheduler: User input detected at 04/08/2008 20:24:51
    2008-08-04 22:53:35.565680 [12]: PowerScheduler: User input detected at 04/08/2008 22:53:31
    2008-08-04 22:53:44.440850 [PowerEventThread]: TV service PowerEventThread 537
    2008-08-04 22:53:44.440850 [PowerEventThread]: TV service PowerEventThread 537
    2008-08-04 22:53:44.706480 [PowerEventThread]: TV service PowerEventThread 537
    2008-08-04 22:53:44.722105 [PowerEventThread]: TV service PowerEventThread 537
     
    D

    DMember 49125

    Guest
    No "Sky News" FTA picture from Astra 19.2 with the latest builds, only sound.
    Works fine with 19376 and older builds. Any idea why this happens?
    @ Pic1 you can see the graph from any other channel except "Sky News"
    @ Pic2 you can see the graph when "Sky News" playing.

    This start happening from the next build of 19376. Nothing else changed to my system.

    I really do appreciate it, if someone have a look on that.
    @gemx:
    Probably this is the reason of the problem: Build 19524: Activated dynamic video pin handling to support faster zapping !!!
     

    neilk

    Portal Pro
    June 22, 2007
    76
    4
    South Africa South Africa
    Music Share Watcher issue

    I have never been able to get the Music Share Watcher plugin to work properly and would like to use it as my 5000+ database of songs takes a while to rescan. When deleting a folder with an album, the database gets updated and the album is missing when viewing "albums" in MP. When I add a folder with an album, nothing gets updated, also nothing in the musicsharewatcher.log. When I go to "Share" view, browse to the album and start playing a song, switch back to "album" view, then I can see the new album.

    I have tried using the plugin as well as disabling the plugin and using the musicsharewatcher.exe, both gives the same result. My share is locally on my HTPC.

    I will attach the relevant logs. Any help will be appreciated as I would love to use this functionality to its full extent.

    Thanks to all the Devs for such an amazing piece of open source software :D

    Neil
     

    nicksti

    Portal Pro
    September 1, 2006
    68
    1
    stuttering and no sound at first start

    hello!

    After starting from power-off mode (with automatic mp-start) I have no sound and the picure is in slow motion.
    When I switch to another channel all works fine. It works also, when I finish MP and start it again.

    unfortunally I can not upload the logs at the moment.

    Does anybody have the same problem???
     

    tomeliten4

    Portal Member
    September 29, 2006
    46
    0
    Seljord
    Norway Norway
    No audio or video

    When Im in Manual Control in the TV-Server(dedicated) i get the error no audio or video when starting Timeshifting a channel. :confused:
    The cards i use is FireDTVS, FireDTVS2 and FireDTVT
     

    disaster123

    MP Donator
  • Premium Supporter
  • May 14, 2008
    3,546
    432
    Germany Germany
    Country flag
    For me the preload of the Graphs does not work - the first channel tune is slow as ever - about 10-15 seconds - but preloading is turned on.
     

    gloomyandy

    MP Donator
  • Premium Supporter
  • September 15, 2006
    424
    14
    59
    United Kingdom United Kingdom
    ITV-HD not working

    Hi,
    ITV-HD is still not working for me with this build. However I think I may have found the cause. If I switch back to an older TSReader.ax (from the 27-06-2008), then it works fine. I think this was the last build before the change to use dynamic pin handling and this change may be what is causing the problem with ITV-HD. I've posted a few more details on the thread discussing the problem
    https://forum.team-mediaportal.com/general-support-51/itv-hd-not-working-mp-1-0-0-0-rc2-42436/index4.html

    Let me know if you need any more information or if I can test anything (Is there anyway to disable the dynamic pin handling with a current build?).

    Thanks

    Andy
     

    Users Who Are Viewing This Thread (Users: 0, Guests: 1)

    OP Similar threads Forum Replies Date
    A MediaPortal crash (and restart) on LiveTV after Windows Update (Sep 2020) driver update for Intel HD Graphics 4600 General Support 0
    A VideoDatabaseV5.db3 lock not released on shutting down PC from MediaPortal Installation, configuration support 0
    ajs [News] MediaPortal 1.26 Pre-Release ready for testing! News and Announcements 0
    F MediaPortal 1.16 server crashing due to user error? General Support 5
    M Add Radio channels and EPG to Mediaportal xmlTV 2
    Symphy Version 0.2.9.0 for MediaPortal 1.25 ASIO music player 0
    doskabouter Installing mediaportal MediaPortal 1 3
    A Mediaportal Allgemeines Support- und Diskussionsforum 0
    G Update von MediaPortal Installationsprobleme? 0
    ajs [News] MediaPortal 1 - 1.25 Released! News and Announcements 1
    horned_reaper Standby is prevented by MediaPortal client General Support 0
    U [solved] MediaPortal crashing on startup General Support 10
    g0rsq Info box randomly popping up when watching TV or other video MediaPortal 2 Newcomers Forum 1
    high [unanswered] Hallo möchte gerne Mediaportal. nutzen kann mich jemand anrufen? contactform feedback and requests 2
    ajs [News] MediaPortal 1.25 Pre-Release ready for testing! News and Announcements 0
    ajs [Rejected] Mediaportal Codename MediaPortal 1 48
    M 2nd (Touch-)Display Support on MediaPortal 2 such MPDisplay++? General 2
    N Steam release of MediaPortal MediaPortal 1 Talk 0
    torone Dritter versuch mit Mediaportal 2 Allgemeines Support- und Diskussionsforum 1
    M Fehlerhafter Link auf der aktuellen MediaPortal Seite Page- und Forumsfeedback 0
    H 1.24.0 MP 1.24 high CPU utilization when 'Keep MediaPortal always on top' option enabled Bugreports 4
    mickb [solved] Mediaportal Stops working General Support 5
    J [solved] Newbie to MediaPortal 2 - Cannot open/run TV programs Newcomers Forum 4
    atlantic How to use Spotify inside Mediaportal? Listen Music 18
    horned_reaper MediaPortal configuration error log message General Support 1
    Similar threads

























    Top Bottom