MediaPortal SVN-Snapshot:-08-16-2009 23-57h - Revision:23407.rar (1 Viewer)

dRei3

Portal Member
September 25, 2008
8
0
36
rHeine
Home Country
Germany Germany
Hello Team,

since Version 1.1 and also with this svn i get the following Error, when i try to Start the SetupTV.
In Version 1.0 this message does not pop up. if no one can help me please can you give me the project folder of the TV-Configuration? i can Fix this problem myself and can send you my changes to fix the bug.

can someone help me fix this?

No Firewall is installed.
HOSTS-Data is OK.
Network-Konfiguration is also OK.
 

Attachments

  • Fehler.JPG
    Fehler.JPG
    63.6 KB

Swede

Portal Pro
September 6, 2006
490
47
West Coast Archipelago
Home Country
Sweden Sweden
Does WebEPG work with merged channels for anyone else?

I always get 0 programs when I use merged. Both merged channels load fine if I use single. I have tested arion_p´s latest fix from this thread with same result.

Maybe the time settings are wrong? I wrote 06:00-19:59 + 20:00-05:59:
2009-08-28 08:37:55.412000 [WebEPGImporter]: Loading Merged Channel Barn-Kunskapsk.
2009-08-28 08:37:55.428000 [WebEPGImporter]: Loading Merged Sub-channel: barnkanalen@svt.se Time range: 6:0-19:59
2009-08-28 08:37:55.430000 [WebEPGImporter]: Loading Merged Sub-channel: kunskapskanalen@svt.se Time range: 20:0-5:59

I also tried time settings without zeroes, but that did not help :(
 

Attachments

  • 1.jpg
    1.jpg
    68.8 KB

vuego

Documentation Group
  • Team MediaPortal
  • August 5, 2006
    1,637
    764
    Göteborg
    Home Country
    Sweden Sweden
    Does WebEPG work with merged channels for anyone else?

    I always get 0 programs when I use merged. Both merged channels load fine if I use single. I have tested arion_p´s latest fix from this thread with same result.

    Maybe the time settings are wrong? I wrote 06:00-19:59 + 20:00-05:59:
    2009-08-28 08:37:55.412000 [WebEPGImporter]: Loading Merged Channel Barn-Kunskapsk.
    2009-08-28 08:37:55.428000 [WebEPGImporter]: Loading Merged Sub-channel: barnkanalen@svt.se Time range: 6:0-19:59
    2009-08-28 08:37:55.430000 [WebEPGImporter]: Loading Merged Sub-channel: kunskapskanalen@svt.se Time range: 20:0-5:59

    I also tried time settings without zeroes, but that did not help :(

    It does work for me but I'm using 05:29-20:00 + 19:59-05:30 (SVTB starts at 05:30). If you start Kunskapskanalen at 20:00, wouldn't it skip the first show? And the show on SVTB at 06:00? Will that also be fixed arion? :)

    The problem with Boxer is that it doesn't specify end times.
     

    Laban

    Portal Pro
    July 1, 2007
    206
    18
    Luleå
    Home Country
    Sweden Sweden
    The HD channels looks a bit weird when using EVR. Seems like the video is half the size it should be. The logs says:

    Code:
    2009-08-29 07:59:33.191142 [Debug][14]: PlaneScene: crop T, B  : 0, 0
    2009-08-29 07:59:33.191142 [Debug][14]: PlaneScene: crop L, R  : 0, 0
    2009-08-29 07:59:33.192119 [Info.][14]: PlaneScene: video WxH  : 1920x544
    2009-08-29 07:59:33.192119 [Debug][14]: PlaneScene: video AR   : 60:17
    2009-08-29 07:59:33.192119 [Info.][14]: PlaneScene: screen WxH : 1280x768
    2009-08-29 07:59:33.193095 [Debug][14]: PlaneScene: AR type    : Normal
    2009-08-29 07:59:33.193095 [Debug][14]: PlaneScene: PixelRatio : 1
    2009-08-29 07:59:33.194072 [Debug][14]: PlaneScene: src        : (0,0)-(1920,544)
    2009-08-29 07:59:33.194072 [Debug][14]: PlaneScene: dst        : (0,202)-(1280,565)
    2009-08-29 07:59:38.626341 [Debug][3]: OnSubtitle - stream position 7,4517502784729

    1920*544 doesn't seem right to me, i believe that it should be 1920*1080 (1080i in this case). I might add that this is still better then it used to be, it used to say something like 320*240 with the corresponding part of the screen showing, = zoomed in..
     

    Laban

    Portal Pro
    July 1, 2007
    206
    18
    Luleå
    Home Country
    Sweden Sweden
    I've tried with CoreAVC and ffdshow. But i noticed something interesting. I switched to a SD channel and then back to the same HD channel, and then i got 1920*1080. Switched the tv off , then on again, same problem, to a SD channel, back to the HD channel and it worked again.

    I've attached the MediaPortal.log, if that can give you any clue. I've also attached a small .ts file when it's not in the correct format.

    I might add that i often get a green or garbled screen when i switch to/from SD/HD channels. Turning the TV off/on usually fixes this problem.

    Just noticed that i can get a garbled screen from that start, I've attached a .ts file showing this and i've also included the logs from both MP and the TVServer from after i stopped the garbled ts.

    /Laban
     

    videofan

    Portal Member
    August 8, 2009
    22
    0
    Home Country
    Germany Germany
    Hi,

    Is the problem "switching between DVB/S radio channels" with the last release fixed?
     

    Users who are viewing this thread

    Top Bottom