MediaPortal SVN-Snapshot:-10-10-2009 19-26h - Revision:23831.rar (1 Viewer)

Status
Not open for further replies.

robyf

Retired Team Member
  • Premium Supporter
  • June 20, 2005
    1,076
    278
    52
    Bolzano
    Home Country
    Italy Italy
    A nasty bug in Mediaportal 1.1 (latest rev, and previous rev's).
    When I open a video for the first time, it works great. When the movie/video is done, and I want to select another one, I get this error:

    Unable to play: (MOVIENAME).mkv

    VIDEO CODEC: V_MPEG4/ISO/AVC
    AUDIO CODEC: DTS (or another codec)

    After this, the screen stays black (but the system works, because I can hear clicking sounds and my remote is respoding).

    So basically, I need to restart Mediaportal if I want to see another episode/movie/media file.

    I use Windows 7 Ultimate RTM (activated) and have a Ati mobility Radeon 3400HD (DXVA capable).

    This is a known problem with MPC-HC codec. Do not use MPC-HC H.264 codec under windows 7. You can use the Microsoft codec instead.
     

    wjw

    Portal Pro
    July 13, 2008
    380
    44
    Home Country
    United Kingdom United Kingdom
    I have experienced the same problem as christix:

    "I have a computer that does not wake up with this svn. The computer does not wake up to record, from standby. Tryed everything,,,clean install.
    Any clue somone? logs if it is relevant when i had to wake the damn thing manualy, With earlier svn:s it worked"

    Have checked Powerscheduler settings very carefully several times. Machine will not wake up for scheduled recordings.

    Can't attached logs at the moment as machine in use for other things. Can reproduce and post logs if those from christix are not enough/
     

    Swede

    Portal Pro
    September 6, 2006
    490
    47
    West Coast Archipelago
    Home Country
    Sweden Sweden
    Hi!
    I have a problem with the last svn.
    I become a error message in MP configuration-->Plugins
    "An error occured while loading the plugin MediaPortal.GUI.VIDEO.GUIVideoFullscreen.
    It´s incompatible with the current MediaPortal Version and won´t be loaded."

    regards,
    shotek

    I get both theese: @rtv: When set to wave it jumps back to master when saving...

    Edit: In my case, it was the upmix to 5.1/7.1 setting in music section, that had to be unchecked.
     

    Attachments

    • 2.jpg
      2.jpg
      22.4 KB
    • 1.jpg
      1.jpg
      24.9 KB

    ARE2

    Portal Pro
    May 9, 2008
    172
    20
    Germany
    Home Country
    Poland Poland
    Hi,

    I' getting a lot of crashes of MP an MP-Config, when trying to scan (ofdb/imdb) my movies into Mediaportal:

    Logs attached for manually searching in mediaportal:
    View attachment 48451

    And by trying to use the DB function in the Mediaportal-Config:
    View attachment 48452

    Really strange, as this problem doesn't seem to exist in 1.02 without SVNs


    Hope somebody knows what is going on there :) !?

    EDIT: I tried it again in Mediaportal (manually) and what ist that?! After entering my videos and trying to get ofdb/imdb data for each one of them, everything seemd to go slower and slower and my harddisk seemd to be more and more active... and finally some kind of mtn.exe crashed? Is that some kind of MP component? It seems that it is causing my probs with the scans!? Maybe it just eats all my resources or something like that?

    Edit:Edit: Ok I think I found the reason for my prob, deactivated the autocreation that seems to me new and that i didn't realise before as ne config option fpr MP and everything seems to work fine now... so not the scanning is the prob but the thumbs creation!?!

    THX & regards
    Are2
     

    technick

    Portal Pro
    May 6, 2009
    566
    155
    Home Country
    France France
    Hi,

    in my case, no picture in HD TV and need to exit with alt F4 (after try to look HD TV)...

    Clean reinstall to test (exept databases), same problem.

    Edit : Work only with coreAVC, no more with divx (I used before) or ffdshow :-/
     

    ARE2

    Portal Pro
    May 9, 2008
    172
    20
    Germany
    Home Country
    Poland Poland
    Hi,

    found another one with HD-TV: When switching between the german "Das Erste HD", "ZDF HD" and Astra HD or Anixe HD everything works fine with my CoreAVC 1.95 and CUDA acceleration :) But switching to Arte HD from one of them, ends in a frozen Picture of the last watched HD Channel or even crashes Mediaportal :( Something with Arte HD seems to be different:mad:

    Hope the Attached Logfiles can help to hunt down the HD Probs :)
    View attachment 48454

    If you need more info let me know and I'll do some more switching, eh testing ;)

    Regards
    Are2
     

    Swede

    Portal Pro
    September 6, 2006
    490
    47
    West Coast Archipelago
    Home Country
    Sweden Sweden
    rtv:

    What in config could be setting back volume settings to master?
    If I edit mediaportal.xml:
    <section name="volume">
    <entry name="digital">yes</entry>
    Then everything works fine until I run config which puts it back to "no" again


    Edit In my case, it was the upmix to 5.1/7.1 setting in music section, that had to be unchecked.
     

    technick

    Portal Pro
    May 6, 2009
    566
    155
    Home Country
    France France
    Hi,

    HD Channel or even crashes Mediaportal :( Something with Arte HD seems to be different:mad:

    Are2


    -I confirm, same problem with Arte HD on sat (work on TNT), definitivly a problem in HD rendering.
    -Add ffdshow as post-processing don't work : picture freeze on zapping
    -desinterlacing seem not work (or is very bad)
     

    wjw

    Portal Pro
    July 13, 2008
    380
    44
    Home Country
    United Kingdom United Kingdom
    Re the failure to wake up issue reported above, this morning my system with this SVN didn't wake up to grab EPG. I use WEBEPG which has always been successful previously.

    Can post logs if necessary - but since the machine didn't wake what log would I need to post?
     

    Guzzi

    Retired Team Member
  • Premium Supporter
  • August 20, 2007
    2,161
    747
    I have a problem with multiple tuners - having FireDTV-s and FireDTV-S2 installed. Everything is fine, if ONE client is zapping, recording etc. second client also works fine, if same transponder is used (stays on same card). If other card is required, system sometimes hangs when trying to tune. It's the same card I use exclusively for Idlegrabbing. Client hangs and I have to reboot to clear the situation.
    TVserver also hangs - so might not be related to MP, but any hint how I can get to a solution? Using win7/64 RTM and latest BDA beta drivers, both cards on same FW-port with "legacy drivers" as recommended by DE.

    2009-10-13 11:19:03.570261 [23]: IsRecordingSchedule:33 True
    2009-10-13 11:19:03.571264 [23]: IsRecordingSchedule: scheduler is not recording schedule
    2009-10-13 11:19:03.895104 [23]: IsRecordingSchedule:33 True
    2009-10-13 11:19:03.896106 [23]: IsRecordingSchedule: scheduler is not recording schedule
    2009-10-13 11:19:06.727449 [4]: Controller: TimeShiftingWouldUseCard n-tv 208
    2009-10-13 11:19:06.728451 [4]: Controller: find free card for channel n-tv
    2009-10-13 11:19:06.730457 [4]: Controller: got 1 tuning details for n-tv
    2009-10-13 11:19:06.731459 [4]: Controller: channel #1 DVBS:tv:RTL World n-tv Freq:12188000 ONID:1 TSID:1089 SID:12090 PMT:0x30 FTA:True LCN:208 SymbolRate:27500 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate3_4 DisEqc:None band:Universal Pilot:NotSet RollOff:NotSet
    2009-10-13 11:19:06.733464 [4]: Controller: card:1 type:DvbIP cannot tune to channel
    2009-10-13 11:19:06.737475 [4]: Controller: card:2 type:DvbS is tuned to different transponder
    2009-10-13 11:19:06.744493 [4]: Controller: card:3 type:DvbS is available priority:2 #users:0 same transponder:False
    2009-10-13 11:19:06.747501 [4]: Controller: card:4 type:RadioWebStream cannot tune to channel
    2009-10-13 11:19:06.747501 [4]: Controller: found 1 available
    2009-10-13 11:19:06.792618 [4]: CiMenu: registered client event for callback
    2009-10-13 11:19:06.794623 [4]: CiMenuSupported called cardid 3
    2009-10-13 11:19:06.795626 [4]: CiMenuSupported card FireDTV BDA Tuner DVBS2 supported: False
    2009-10-13 11:19:06.801641 [4]: Controller: StartTimeShifting n-tv 208
    2009-10-13 11:19:06.802644 [4]: Controller: find free card for channel n-tv
    2009-10-13 11:19:06.804649 [4]: Controller: got 1 tuning details for n-tv
    2009-10-13 11:19:06.805652 [4]: Controller: channel #1 DVBS:tv:RTL World n-tv Freq:12188000 ONID:1 TSID:1089 SID:12090 PMT:0x30 FTA:True LCN:208 SymbolRate:27500 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate3_4 DisEqc:None band:Universal Pilot:NotSet RollOff:NotSet
    2009-10-13 11:19:06.809662 [4]: Controller: card:1 type:DvbIP cannot tune to channel
    2009-10-13 11:19:06.813672 [4]: Controller: card:2 type:DvbS is tuned to different transponder
    2009-10-13 11:19:06.817683 [4]: Controller: card:3 type:DvbS is available priority:2 #users:0 same transponder:False
    2009-10-13 11:19:06.822696 [4]: Controller: card:4 type:RadioWebStream cannot tune to channel
    2009-10-13 11:19:06.823698 [4]: Controller: found 1 available
    2009-10-13 11:19:06.824701 [4]: card: CardTune 3 n-tv wmc-gmi-guzzi:3:-1
    2009-10-13 11:19:06.825704 [4]: card: Tune 3 to n-tv
     
    Status
    Not open for further replies.

    Users who are viewing this thread

    Top Bottom