MediaPortal SVN-Snapshot:-10-28-2009 18-59h - Revision:23978.rar (1 Viewer)

Status
Not open for further replies.

rafagsi

Portal Member
April 20, 2008
24
1
Simancas
Home Country
Spain Spain
PD: My Logs are in the previous thread

What thread? If you are pointing to the previous SVN thread then I assume that the logs are invalid as they have been created with the old SVn version.

Also log should be posted in a thread that is used to discuss the issue. I personally at least wont help any user who is lazy enough to skip such step. Thanks for understanding as I have enough things to do even without hunting down the logs.

Sorry if I offended you, it was not my intention.

You're partly right, but I haven't posted my logs from this SVN because in my case not been settled any of my bugs, have actually increased (Live TV in HD for example) and understand that people are busy working out other bugs more important.

I thank you for all your work and all your help, but unfortunately I don't have adequate knowledge to provide more help, I can only do tests, but this version doesn't work well and there are more people in my house who lives with me and doesn't understand they can not see the television properly.

I can not post my logs because I installed the Alpha version, but as my bugs are the same as with the previous SVN, someone could have checked my logs above.

Again, Sorry if I offended you, it was not my intention but I do not deserve your response.:(
 

tourettes

Retired Team Member
  • Premium Supporter
  • January 7, 2005
    17,301
    4,800
    Again, Sorry if I offended you, it was not my intention but I do not deserve your response.:(

    No, I was not offended. Sorry if it sounded that way.

    I was mainly pointing out that both sides needs to do co-operation. It is very important especially when both sides are most likely having only little resources.
     

    starlight

    Portal Member
    October 4, 2007
    39
    0
    Home Country
    Germany Germany
    mySQL Database corruption problem

    Hello,
    today MP does not start any TV anymore. It showed my only unknown error when i tried to start tv.
    So is started tvserver configuration but my card exist only satellite configuration was wrong.
    I fixed wrong satellites bust still unknown error.
    No i tried a satellite scan, worked well, but still again unknown error.
    Now my wive was a little impatient about not working TV, so i looked in tvserver error log and i saw a message "mysql database abort lock" and "database corruptions" where inside.

    I don't know where it comes from (probably my little children played with the htpc and does not clean shutdown).
    But the major problem is that there was no usable message and the system behaved normally, beside the unknown error.
    Also there is no easy possibility to check and repair the database from gui.

    I'm sorry that i forgot to save the logs but i was a little bit in hurry to convince my wive that MP is a great software and did a clean reinstall

    peter
     

    pilehave

    Community Skin Designer
  • Premium Supporter
  • April 2, 2008
    2,566
    521
    Hornslet
    Home Country
    Denmark Denmark
    As I reported a couple of SVN's ago (following up on this post): https://forum.team-mediaportal.com/...annels-available-69669/index2.html#post503686

    When you add radio-channels to your setup, all tv-channels disappear from the TVGuide. Three users report the same as me:
    https://forum.team-mediaportal.com/...annels-available-69669/index3.html#post522863

    The radio-channels I have added are webstreams. Don't know if that makes any difference.

    Steps to reproduce:

    1. Shut down MediaPortal
    2. Open TV-Server Config
    3. Add one radio-channel webstream (example: DR P3 )
    4. Save TV-Server Config
    5. Start MediaPortal and navigate to TV-Guide. It's empty.

    The logs is FILLED with one error repeating itself, but not the same as the linked thread:

    2009-10-31 00:02:23.348649 [Info.][MPMain]: ProcessWindows exception:confused:ystem.NullReferenceException: Objektreferencen er ikke indstillet til en forekomst af et objekt.
    ved TvPlugin.TvGuideBase.Process()

    (in english:
    Exception:confused:ystem.NullReferenceException: Object reference not set to an instance of an object.
    at TvPlugin.TvGuideBase.Process()
    )

    Would someone be kind enough to check this problem?

    I have had this problem with the following SVN's: Revision:23978, Revision:23908, Revision:23831 and still have it with the current SVN.

    I didn't use radio before, so the error may have been there for longer. Both Windows 7 client and XP server + client gets this error.

    It makes no difference if you check/uncheck the "visible in tv-guide" part. Or if the channel is in a group or not...
     

    catavolt

    Design Group Manager
  • Team MediaPortal
  • August 13, 2007
    14,973
    11,873
    Königstein (Taunus)
    Home Country
    Germany Germany
    I have atm 107 webstreams in TVServer/Radio, and ALL work fine. No errors. Approx. 15 were added with last SVN.
     

    Attachments

    • Radios.jpg
      Radios.jpg
      227.5 KB

    GoldenEye

    MP Donator
  • Premium Supporter
  • October 26, 2005
    299
    26
    Switzerland
    Home Country
    Switzerland Switzerland
    Pressing FFD/REW stalls MP

    I don't know exactly since wihich version I face the following issue:

    When I play a DVD stored on my HD in a VIDEO_TS folder and try to forward/rewind the movie, e.g 10 minutes, the movie forwards 10 minutes but the OSD does not disappear anymore as expected. However, the movie goes on and I can hear the MP skin sound effects when pressing the remote. In order to stop the movie, I have to kill the Mediaportal process.

    The issue neither appears in TV nor when I play e.g. XVid movies. I can reproduce the issue with the blue3wide as well as with xfactor skin.

    I am using latest SAF beta, i.e. Cyberlink Codec for both movies and DVD. Logs are attached.

    Thx for your support.

    G.
     

    rafagsi

    Portal Member
    April 20, 2008
    24
    1
    Simancas
    Home Country
    Spain Spain
    Again, Sorry if I offended you, it was not my intention but I do not deserve your response.:(

    No, I was not offended. Sorry if it sounded that way.

    I was mainly pointing out that both sides needs to do co-operation. It is very important especially when both sides are most likely having only little resources.

    Absolutely.

    I'll try to help as much as possible within my means.

    No hard feelings.:D
     

    greybox

    MP Donator
  • Premium Supporter
  • January 23, 2009
    652
    168
    Home Country
    Canada Canada
    Could you guys discuss technical and on-topic matters. :mad: We are talking about MediaPortal SVN-Snapshot:-10-28-2009 18-59h - Revision:23978 here. As for hard feelings etc., please use private messages system, which is more appropriate. ;)

    Thank you very much.

    Again, Sorry if I offended you, it was not my intention but I do not deserve your response.:(

    No, I was not offended. Sorry if it sounded that way.

    I was mainly pointing out that both sides needs to do co-operation. It is very important especially when both sides are most likely having only little resources.

    Absolutely.

    I'll try to help as much as possible within my means.

    No hard feelings.:D
     

    -Manfred-

    Retired Team Member
  • Premium Supporter
  • May 15, 2007
    728
    343
    Home Country
    Finland Finland
    I don't know exactly since wihich version I face the following issue:

    When I play a DVD stored on my HD in a VIDEO_TS folder and try to forward/rewind the movie, e.g 10 minutes, the movie forwards 10 minutes but the OSD does not disappear anymore as expected. However, the movie goes on and I can hear the MP skin sound effects when pressing the remote. In order to stop the movie, I have to kill the Mediaportal process.

    The issue neither appears in TV nor when I play e.g. XVid movies. I can reproduce the issue with the blue3wide as well as with xfactor skin.

    I am using latest SAF beta, i.e. Cyberlink Codec for both movies and DVD. Logs are attached.

    Thx for your support.

    G.

    You should use Cyberlink DVD navigator also if using codec. Mixing navigator and codec can cause all kind of strange behaviour and this is also stated several times.
     

    pilehave

    Community Skin Designer
  • Premium Supporter
  • April 2, 2008
    2,566
    521
    Hornslet
    Home Country
    Denmark Denmark
    Trying to play back MKV files with this SVN doesn't work. Most of the time it shows the first frame of the movie, but not always.

    I can connect with Graphstudio and the graph looks ok to me, but I can only do this on the first file I play. If I press "stop" and select another file (or the same) there is no Graph to connect to.

    I have attached logs and dump from Graphstudio. Some files play one time or twice, but with stutter, but then suddenly I get a "Unable to play: DTS 6CH 48000hz - Jumper 2007.mkv" even though I have just played the (stuttering as hell, but it played).

    Playing back an MPEG2 file suddenly opens another DirectShow window. Sorry, but this SVN is even worse than the earlier

    The Haali icon disappears ok from the tray.

    The worst thing is, that I need to press "OK" twice when I want to watch a recording from TV (SD .ts-files). And moments ago MP just crashed on me. Going back to earlier SVN ASAP.
     

    Attachments

    • graph.png
      graph.png
      41.3 KB
    Status
    Not open for further replies.

    Users who are viewing this thread

    Top Bottom