Preview failed: Unknownerror (1 Viewer)
- Thread starter lcdfreeek
- Start date
- September 1, 2008
- 21,578
- 8,227
- Home Country
-
New Zealand
That is normal when TV Server cannot read the channel number from the stream.
Sorry, I can't tell you what this means without log files.
- September 1, 2008
- 21,578
- 8,227
- Home Country
-
New Zealand
Fix your LNB LOF override settings:
http://wiki.team-mediaportal.com/1_...ning_Details#Override_default_LNB_frequencies
None of them should be blank, even if they're disabled. Set to zero (0) if you don't care.
http://wiki.team-mediaportal.com/1_...ning_Details#Override_default_LNB_frequencies
None of them should be blank, even if they're disabled. Set to zero (0) if you don't care.
Users who are viewing this thread
Similar threads
When I tested MP 2.5 some months ago using TVE3.5, I found that "scan for channels" failed to find any channels when I selected a DVB-T2 tuner (a TBS 6284) :(, but succeeded when I used a DVB-T tuner (a Pinnacle 2000i) :). Obviously the Pinnacle found only those channels broadcast in DVB-T MUXes (in the UK we have both DVB-T MUXes and...
When I tested MP 2.5 some months ago using TVE3.5, I found that "scan for channels" failed to find any channels when I selected a...
Hi all
Running 1.7.1.0 TV Server as part of a full upgrade to MP2 2.5 setup
After some problems with retuning (solved -...
Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine.
Can you copy the created ts file(located in your timeshift folder) somewhere else while in channel preview and try to play it in VLC or MPC-HC?
PS: You can also try to make short record
Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine...
I've been successfully using MediaPortal1 and TV Server 1.17 on Win7 for years, using first a HDHomerun tuner, when that died, a...
I am Sure the Issues will be fixed towards a stable. NET6 Version.
Please don't get me wrong - My Intent was not any Complaint at all.
I just wanted to:
understand current Status & Situation
understand my Options for a stable System
improve my Knowledge & learn from Experts
Especially because your limited Dev Resources and the...
I am Sure the Issues will be fixed towards a stable. NET6 Version.
Please don't get me wrong - My Intent was not any Complaint at...
Hello Folks,
Yesterday I upgraded to Mediaportal 2.5 via uninstalling 2.4.1 first and then install the latest .NET6 Variant of...
Those signal numbers look fine. (y)
Unfortunately, I don't have any other suggestions as to the possible cause of your problem. :(
-- from CyberSimian in the UK
Those signal numbers look fine. (y)
Unfortunately, I don't have any other suggestions as to the possible cause of your problem. :(...
I've just rebuilt my htpc and added DVB-S and DVB-T cards TBS6281 and TBS6982. The system is all working well except for playback...
It's getting weirder.....
If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the stations but if I rescan it on the same card it just keeps updating the 1 channel. My brain is melting.........
It's getting weirder.....
If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the...
Having great fun with this still. I have a fairly good PC setup, Ryzen 5 8500g, Msi Pro 650M-P with 32GB of RAM with a TBS 6281 and...