[fixed] Scrambled DVB-T channels HVR-4400 & CI (1 Viewer)

Nogge69

Portal Pro
January 20, 2007
57
8
Norway Norway
Nope, don't thik so. For my part, I haven't tested on the 1.2.0 anymore, since the 1.1.2 works fine for now.
Not sure if the dev's have anything new on this.
 

mm1352000

Development Group
  • Team MediaPortal
  • September 1, 2008
    21,571
    8,218
    New Zealand New Zealand
    Country flag
    Hi everyone

    I'm not at home right now so I can't check the code, but it looks to me like the instruction to descramble is either not being sent to the WinTV CI, or the WinTV CI is not receiving the instruction. I say that because in the 1.1.x logs there is:

    2010-11-10 00:53:17.335937 [(6)]: subch:0 SendPMT version:14 len:52 117

    2010-11-10 00:53:17.351562 [(6)]: Conditional Access: sendPMT to WinTVCI succeeded

    2010-11-10 00:53:17.351562 [(6)]: WinTVCI: CAM initialized
    I cannot see that anywhere in the 1.2.0a logs...
    Can you please post some new logs showing the graph building in 1.1.2 (or 1.1.3 - whichever 1.1.x version you are using that still works).

    Best regards,
    mm
     

    Nogge69

    Portal Pro
    January 20, 2007
    57
    8
    Norway Norway
    Have attached the full Log directory from the working 113. Hope this helps.

    FYI
    1.2.0B still have the same problem as 1.2.0A. Not possible to whatch scrabeled channels with WinTV CI
    If needed, I could set up a test server with 1.2.0B.
     

    Attachments

    mm1352000

    Development Group
  • Team MediaPortal
  • September 1, 2008
    21,571
    8,218
    New Zealand New Zealand
    Country flag
    Hi Nogge69

    Thanks for the logs - I didn't expect you to reply so quickly! :D

    Unfortunately they don't contain the information that I need. What I need to see is logs for TV Server starting up and initialising your tuner(s). Could you quickly restart the TV Service and post new logs?

    mm
     

    Nogge69

    Portal Pro
    January 20, 2007
    57
    8
    Norway Norway
    mm1352000,

    Have been waiting by my PC for a long time, for a solution to this issue;)
    Better act Quickly so you don't go away:)

    Updated logs attached. (Had to do a full restart of the pc, and then did a couple of server service restarts, just in case)
     

    Attachments

    mm1352000

    Development Group
  • Team MediaPortal
  • September 1, 2008
    21,571
    8,218
    New Zealand New Zealand
    Country flag
    Hi again Nogge69

    Thanks for the logs - perfect! :D

    Have been waiting by my PC for a long time, for a solution to this issue;)
    Better act Quickly so you don't go away:)
    I'm not going anywhere; at least not right now. :)
    I'm 99% certain that I've found the problem and I have a fix. To be honest I find it *very* hard to believe that this has not been discovered before now. I have a Hauppauge Nova S Plus, but I can't test the fix because I don't have a WinTV CI. They're not available in New Zealand. I've tried to buy one for testing several times from Ebay Germany but I keep getting outbid! :mad:;)

    Anyhow, would you be able to install 1.2.0b on a spare PC, or could you update your HTPC? This fix would have to be tested before it could be committed for 1.2.0rc...

    mm
     

    Nogge69

    Portal Pro
    January 20, 2007
    57
    8
    Norway Norway
    Thanks for the feedback:D

    Don't want to touch the running server too much, but I should be able to set up one of my spare laptops tonight as a test server. (When I get back from work)

    As mentioned earlier, I have the exact same problem on my 4400 and my Nova stick. (The Nova stick will be used on the test server)
     

    mm1352000

    Development Group
  • Team MediaPortal
  • September 1, 2008
    21,571
    8,218
    New Zealand New Zealand
    Country flag
    Okay.

    It is about 1am here so I'm about to go to bed. I'll check on the thread tomorrow, but in the meantime you're going to need a patch to test. The file that you need is attached.

    Instructions (after you've installed 1.2.0b):
    1. Stop the TV Service.
    2. Take a backup of the TVLibrary.dll in your TV Server install folder.
    3. Download and extract the attached TVLibrary.dll into your TV Server install folder.
    4. Start the TV Service.

    After that, please test to see whether *both* scrambled and unscrambled channels work. I'll be here to answer questions if you have problems. If the patch doesn't work then please post logs again...

    Best regards,
    mm
     

    Attachments

    Nogge69

    Portal Pro
    January 20, 2007
    57
    8
    Norway Norway
    Yesss!!! it works.

    Just tested it briefly on my 1.2.0B test server and both freeview and scrambeled channels work.
    Haven't had time to test much, since we lost power in the whole area just as I was about to start testing:(
    It came back after a while so I've manage to test a little bit.

    Logs attached.

    Pls. let me know if you need anything else.

    I might be willing to donate one of my WinTV CI's for this. (Just use one on my server anyway)
    Let me know if your interested, and I'll see what i can figure out regarding shipping.

    Well, its over 1am over here now, so its time to go to bed for me too:)
     

    Attachments

    Users Who Are Viewing This Thread (Users: 0, Guests: 1)

    OP Similar threads Forum Replies Date
    R Suggestions for reliable PCIe DVB-S2 tuner MediaPortal 1 Talk 8
    Golf4 DVB-IP über Fritzbox - m3u-Senderliste Allgemeines Support- und Diskussionsforum 33
    M TV Server can't tune to some DVB-S multiplexes while other software can General 0
    C Telenet analog-to-digital switch -- manually finding and inputting DVB-C channels in Mediaportal2 General 0
    framug No color in TVGuide when XMLTV without DVB EPG MediaPortal 1 Talk 59
    T [solved] Any idea where Channel 107 (DVB-T2) BBC News HD (and others!) have gone??? Installation, configuration support 12
    framug [EPG] Some problems with DVB EPG Improvement Suggestions 49
    bta489 [solved] DVB-T2 Recordings: Sometimes no Audio after muxing with mkvmerge Tools and other software 2
    badboyxx TV card is listed as unknown in TV-server config General 4
    bribbon [Pending] Switzerland: DVB-T switch-off on 03 June 2019 Submit: EPG-Grabbers and tuningdetails 0
    bribbon [Pending] DVB-C Tuning Parameters: Switzerland.UPC Cablecom [NID 43020] v.7.xml Submit: EPG-Grabbers and tuningdetails 0
    J DVB-S2 card fails to tune? Subchannel count increasing Television (MyTV frontend and TV-Server) 3
    D Cannot get a fully populated UK Freesat EPG (DVB-S) General 14
    hanfmaster Dvb-s2 zu android ipad Einsteigerforum 0
    C DVB-C Empfänger Hauppauge Win TV dual wird in Media Portal nicht aktiviert TV / Streaming 1
    Terra [solved] MP TV Server cannot find any channels anymore, DVB viewer works Installation, configuration support 8
    Booner [Verkauf] Verkaufe Max S8 8 Tuner DVB-S2 Karte von Digital Devices neuwertig Marktplatz 2
    N [solved] How to record a series (UK Freeview dvb-t) General 10
    N What dvb-t/t2 dual or quad tuners work with media portal (in the UK)? Newcomers Forum 8
    E [solved] Vodafone Kabel dvb-c Braunschweig Tuning Liste (Stand 31.01.2019) TV / Streaming 0
    items [Verkauf] Hauppauge Dual TV Tuner USB DVB-C, DVB-C Marktplatz 0
    A Help! MP2 - DVB-T Not recognised (DRIVERS?) General 12
    porky996t DVB Sat card possibly failed General Support 1
    splatterpop My optimized dvb epg configuration for tv server MediaPortal 1 Talk 0
    N Tswriter Watch / Listen Media 51
    Similar threads

























    Top Bottom