Toshiba Dvb Hybrid Card (1 Viewer)

davefiore

New Member
October 17, 2006
4
0
Home Country
Italy Italy
1. TV Card:
MediaPortal does not see Toshiba usb tuner. Anybody has some idea on how to fix this? Tks
 

Marcusb

Retired Team Member
  • Premium Supporter
  • February 16, 2005
    1,994
    29
    Melbourne
    Follow the instructions in this thread : https://forum.team-mediaportal.com/showthread.php?t=1573

    You could alsotry posting some more information about the card. It's possible someone else has the same model and might be able to provide tips, but without knowing eactly what it is (apart from Toshiba) it's not very likely.

    Welcome to the forums and sorry for being a little harsh, but we get asked this quite a lot :)
     

    davefiore

    New Member
    October 17, 2006
    4
    0
    Home Country
    Italy Italy
    Toshiba Usb Hybrid DVB tv tuner

    Hello and tks for your kind help!!!

    Unfortunately Toshiba Usb Hybrid DVB tv tuner is the better definition I can provide. Iis a sort of pen tuner that you plug in the usb port.

    The thread you gave me is a little difficult for me to undestand, I am a sort of beginner in tv cards and all this stuff..

    Anyway, I checked the xml file CaptureCardDefinitons and my Toshiba is not in there. Maybe this is the point.

    Could anyone provide the list of this card so I could write it inside this file?

    Tks again, ciao a tutti
     

    davefiore

    New Member
    October 17, 2006
    4
    0
    Home Country
    Italy Italy
    Still needing help
    I tried to fix the problem with your suggestions but i am really not good at it...
    It looks that i am not able to find the filters...
    anyway, the tuner works correctly with its software, savvy tv, but is is so poor...
    What i really need is the xml listing...

    grazie ciao
     

    Users who are viewing this thread

    Similar threads

    Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download page, there was an additional item called "TBS6281se V2 Change Mode Tool". There was zero documentation to accompany this. I downloaded it and ran it. It is a tool to detect the current run state of both...
    Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download...
    My previous TBS PCI-E card failed, so I bought another one. The model I chose is the TBS 6181-SE, which can be seen on Amazon here...
    Replies
    2
    Views
    1K
    I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network. Hauppauge card retired long ago. I have also retired very early SD units, the Quatros seem to work much better than the older units. Go to SD's support website and download and install the windows...
    I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network...
    I am currently using a Hauppauge WinTV QuadHD PCIe card on MP1 (1.37) for DVB-T, but 2 of the tuners have died. Thinking about...
    Replies
    3
    Views
    1K
    See my reply in the other thread. -- from CyberSimian in the UK
    See my reply in the other thread. -- from CyberSimian in the UK
    Any idea where can I get the Windows7 installation software for this AverMedia A323AF card. I found the drivers for the A323 which...
    Replies
    1
    Views
    1K
    Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
    Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
    I used to run the TVService under the "NT Service\TVService" account to follow least privileges principal (not exposing my whole...
    Replies
    3
    Views
    2K
    I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ? MP(1) will only use LAV if you select "Internal DirectShow player" as music output, but then you lose gapless playback. If you you don't have multichannel music you can choose WASAPI as the output and set the number of speakers to stereo. I have...
    I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ? MP(1) will only use LAV if you select...
    Not sure if this a a bug/config/settings problem. I am running a media portal 2.5 server with 2.41 client but it seems I get the...
    Replies
    1
    Views
    653
    Top Bottom