Tuner (1 Viewer)

Thread starter DFergATL
Start date February 18, 2013

DFergATL

Portal Member

February 18, 2013

Does anyone have an opinion on this tuner card??

http://www.amazon.com/AVerMedia-A188-HD-Duet-Windows/dp/B002HWRN9U/ref=reg_hu-rd_add_1_dp

Last edited: February 18, 2013

Gilthanas91

Portal Member

February 26, 2013

Well, from my experience, Avermedia tuners works like a charm, so you shoudn't have any problem if you're using this one

Users who are viewing this thread

Similar threads

MP1 MP2 TBS6281 only showing cable, not DVB-T/T2 DE

Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download page, there was an additional item called "TBS6281se V2 Change Mode Tool". There was zero documentation to accompany this. I downloaded it and ran it. It is a tool to detect the current run state of both...

Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download...

My previous TBS PCI-E card failed, so I bought another one. The model I chose is the TBS 6181-SE, which can be seen on Amazon here...

Replies: 2

Views: 337

May 4, 2025

EuroSong

MP1 MP2 1.36 Hauppauge WinTV-NOVA-S2 DiSEqC DE

Brief update... Hauppauge support responded quickly, stating that the "driver for all of our product confirm to the BDA format". Not sure what that means, but to test that, I downloaded a copy of Capture4Me, and indeed, it switches LNBs without any issues with minimal configuration (just set DiSEqC to 1.x A/B/C/D and select the...

Brief update... Hauppauge support responded quickly, stating that the "driver for all of our product confirm to the BDA format"...

Due to ongoing issues with my TBS5520SE USB tuner, I've invested in a Hauppauge WinTV-NOVA-S2 tuner. I have a multi-LNB setup...

Replies: 18

Views: 2K

March 20, 2025

AberDino

MP1 MP2 Issue after replacing tuner DE

Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine. Can you copy the created ts file(located in your timeshift folder) somewhere else while in channel preview and try to play it in VLC or MPC-HC? PS: You can also try to make short record

Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine...

I've been successfully using MediaPortal1 and TV Server 1.17 on Win7 for years, using first a HDHomerun tuner, when that died, a...

Replies: 4

Views: 977

January 15, 2025

Pablik

MP1 MP2 TV server service does not start automatically DE

@CyberSimian this workaround worked. @TLD this hint was good because I wanted to install x64. Now I have x86 installed

After reinstalling a WinTV quad HD card and MP1.36, the TV service no longer starts automatically. A manual start is no problem...

Replies: 4

Views: 818

December 26, 2024

harryzwo

MP1 MP2 MP1.36 usually doesn't start DE

Is this solved? I've had the same, or maybe just similar, issue for a while now, and I've narrowed it down to Onlinevideos getting MediaPortal stuck on the plugin loading stage of startup. Installing the former stable version now, and MediaPortal seems to start without issues. This usually happens when I start windows and...

Is this solved? I've had the same, or maybe just similar, issue for a while now, and I've narrowed it down to Onlinevideos getting...

After getting MP1.36 installed and set up after a few problems, I have the problem that MP usually doesn't start. It usually only...

2 3 4