TV Server Configuration - New Install - Can't see anything - Font problem ? ! (3 Viewers)

[henrysinn]

Hi all
Please see attached after new install just now.
Win 11 - Also new build. TV 3.5
Any thoughts as to where how I fix this?
Thank you

 

[CyberSimian]

Win 11 - Also new build. TV 3.5

I cannot tell from your post whether you are using MP1 or MP2. The reference to TV 3.5 suggests that you are using MP2.

If you are using MP2, please be aware that TVE 3.5 is an unfinished product, and has problems. During the install of MP2, you should choose TVE 3 (if you are given a choice -- it depends on which installer you are using).

-- from CyberSimian in the UK

 

[henrysinn]

I cannot tell from your post whether you are using MP1 or MP2. The reference to TV 3.5 suggests that you are using MP2.

If you are using MP2, please be aware that TVE 3.5 is an unfinished product, and has problems. During the install of MP2, you should choose TVE 3 (if you are given a choice -- it depends on which installer you are using).

-- from CyberSimian in the UK

Thank you @CyberSimian
Yes MP2. Found a work around for 'TV Server Configuration' display problems via Win 11 'Scale and Layout' in System - Display.
Default at new build was 3840x2160 resolution with 300% Scale. Had to back off to 1920x1080 with 100% Scale and then reboot (would not work without reboot).
Could then see and use everything in 'TV Server Configuration' (Solved).
However, given your notes and another problem with the TV (Graph) actually starting, I will uninstall and reinstall TVE 3

 

[CyberSimian]

However, given your notes and another problem with the TV (Graph) actually starting, I will uninstall and reinstall TVE 3

You can convert from TVE 3.5 to TVE 3 simply by re-running the installer and selecting TVE 3. The installer will uninstall TVE 3.5 and then install TVE 3. You don't need to uninstall MP completely.

-- from CyberSimian in the UK

 

[el Filou]

Found a work around for 'TV Server Configuration' display problems via Win 11 'Scale and Layout' in System - Display.
Default at new build was 3840x2160 resolution with 300% Scale. Had to back off to 1920x1080 with 100% Scale and then reboot (would not work without reboot).

FYI, you can also play with these settings: show TV Server Configuration shortcut => Right-click => Properties => Compatibility => Change High DPI settings
That way you don't have to change the whole scaling of Windows just for this particular application