Twinhan 1041 (DVB-S2) and Diseqc (1 Viewer)
- Thread starter Puchacz
- Start date
Poland
Users who are viewing this thread
Similar threads
Brief update... Hauppauge support responded quickly, stating that the "driver for all of our product confirm to the BDA format". Not sure what that means, but to test that, I downloaded a copy of Capture4Me, and indeed, it switches LNBs without any issues with minimal configuration (just set DiSEqC to 1.x A/B/C/D and select the...
Brief update... Hauppauge support responded quickly, stating that the "driver for all of our product confirm to the BDA format"...
Due to ongoing issues with my TBS5520SE USB tuner, I've invested in a Hauppauge WinTV-NOVA-S2 tuner. I have a multi-LNB setup...
4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0 on Windows 7 SP1
4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0...
My TV PC is more a cast-off on older hardware (a 'Quiet PC' i5 4690, 16GB ram, 2xSSD 1xHDD, system graphics), mainly as a cheap way...
MP1
MP2
1.38
Running TVService as "NT Service\TVService" or "Local Service" not working anymore since Windows September 2025 updates
DE
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
I used to run the TVService under the "NT Service\TVService" account to follow least privileges principal (not exposing my whole...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network.
Hauppauge card retired long ago. I have also retired very early SD units, the Quatros seem to work much better than the older units.
Go to SD's support website and download and install the windows...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network...
I am currently using a Hauppauge WinTV QuadHD PCIe card on MP1 (1.37) for DVB-T, but 2 of the tuners have died. Thinking about...
Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download page, there was an additional item called "TBS6281se V2 Change Mode Tool". There was zero documentation to accompany this. I downloaded it and ran it. It is a tool to detect the current run state of both...
Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download...
My previous TBS PCI-E card failed, so I bought another one. The model I chose is the TBS 6181-SE, which can be seen on Amazon here...