Which analog TV card (1 Viewer)
- Thread starter meggsico
- Start date
Norway
Hi meggsico, and welcome to the forum 
I'd recommend that you get a card with hardware encoding capabilities.
Reasons:
- Will not chew your CPU (--> lower noise)
- Will work well with MP (as all hardware encoding cards are supported)
They bad side is that they are a bit more expensive. I have the Hauppauge PVR-150, and most who have are happy with it.
I'd recommend that you get a card with hardware encoding capabilities.
Reasons:
- Will not chew your CPU (--> lower noise)
- Will work well with MP (as all hardware encoding cards are supported)
They bad side is that they are a bit more expensive. I have the Hauppauge PVR-150, and most who have are happy with it.
Users who are viewing this thread
Similar threads
MP1
MP2
1.38
Running TVService as "NT Service\TVService" or "Local Service" not working anymore since Windows September 2025 updates
DE
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
I used to run the TVService under the "NT Service\TVService" account to follow least privileges principal (not exposing my whole...
I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation.
"TV Server Config" has a "TV Mapping" panel in the "TV Channels" section. On the "TV Mapping" tab:
The left column lists the channels that have not yet been mapped to the TV tuner identified by the drop-down menu just...
I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation.
"TV Server...
I've scanned for channels, and got all channels mapped to tuner 0 of my 8 channel TV card (eg: 2 cards of 4 channels each)
Is there...
Thanks CyberSimian, will give it a try!
Thanks CyberSimian, will give it a try!
I have recently installed mediaportal 1 and all is working fine, however I would like the startup page to be the TV guide. I guess...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network.
Hauppauge card retired long ago. I have also retired very early SD units, the Quatros seem to work much better than the older units.
Go to SD's support website and download and install the windows...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network...
I am currently using a Hauppauge WinTV QuadHD PCIe card on MP1 (1.37) for DVB-T, but 2 of the tuners have died. Thinking about...
Well, I had already recognized your problem, but I still wanted to point out the basic connections once again. Unfortunately, I don't have a fundamentally different solution for you, but with this approach you should achieve your goal. ;)
The idea of first setting the current genre colors with the defines is certainly a good one, as...
Well, I had already recognized your problem, but I still wanted to point out the basic connections once again. Unfortunately, I...
Good afternoon,
Does anyone know a way of referencing the genre colour of the currently selected item in the TV Guide. We are all...
