Would Like to Start Working on USBUIRT Fix: Where Do I Start (1 Viewer)

SteveV

Retired Team Member
  • Premium Supporter
  • October 13, 2005
    340
    0
    Boston, Massachusetts USA
    Very cool remote. I'll consider adding keyboard support at some point although it may be quite a while before I get around to it.

    Steve
     

    Igthorn

    Portal Member
    December 22, 2005
    5
    0
    With 0.2.0 RC1 I could teach MP the codes to change channels . With RC2 and any of the recent CVS-Daily builds, whenever I click learn settopbox or Learn Media Portal commands I would get an error saying the driver wasn't loaded. Even though the config program displays, 'USBUIRT version detected: Plugin version: 1.1 (April 01, 2004) - Firmware Version: 5.6 (October 06, 2003)'. I'm using the latest driver from usbuirt.com and have the latest firmware.

    If I learn the codes in RC1 then upgrade to a CVS-Daily build, MP works just fine and changes channels correctly. I just can't change or test them. My USB-UIRT works fine with everything else I use it in, Zoom Player+Girder, and SageTV Trial. And from the sounds of it I should at least be able to attempt to learn. Any clues as to what is wrong?
     

    SteveV

    Retired Team Member
  • Premium Supporter
  • October 13, 2005
    340
    0
    Boston, Massachusetts USA
    I'm not seeing this issue with RC2 or any of the recent cvs builds.

    Have you looked at the mediaportal.log for usbuirt errors? My log shows the following entries on USBUIRT startup:

    12/22/2005 2:19:39 PM add USBUIRT section
    12/22/2005 2:19:39 PM USBUIRT:Open
    12/22/2005 2:19:39 PM USBUIRT:Open success:plugin Version: 1.1 (April, 01, 2004)
    Firmware Version: 5.9 (March, 26, 2004)

    Note that you aren't running the latest firmware. Unfortunately, the firmware download link on usbuirt.com appears to be broken. You may want to post on the usbuirt forum and ask Jon Rhees for the latest firmware.

    There were *many* changes made to the usbuirt support code begining approx 10/27/2005. IIRC RC1 was released 9/2005 so it's quite likely that some of these changes broke compatibility with usbuirt firmware versions prior to the version I used to develope against (5.9 [March, 26, 2004]).

    Can anyone else confirm they are having similar errors? In the meantime, I'd recommend trying a firmware update.

    Steve
     

    Igthorn

    Portal Member
    December 22, 2005
    5
    0
    Found a copy of the v5.9 firmware on usbuirt forum. Updated and no change.

    Config log MP 0.2.0 RC1 + One of the Daily builds (mediaportal.exe/configuration.exe date 12/16/05)
    12/22/2005 8:24:49 PM add USBUIRT section
    12/22/2005 8:24:49 PM USBUIRT:Open
    12/22/2005 8:24:49 PM USBUIRT:Open success:plugin Version: 1.1 (April, 01, 2004)
    Firmware Version: 5.6 (October, 06, 2003)
    12/22/2005 8:24:49 PM USBUIRT:unable to load values from:UIRTUSB-remote.xml

    12/22/2005 8:24:50 PM Load settings:USBUIRT
    12/22/2005 8:24:50 PM LoadSectionSettings()
    12/22/2005 8:24:50 PM USBUIRT: Setting configuration control values
    12/22/2005 8:24:50 PM LoadSectionSettings() done

    Loading up MP 0.2.0 RC1 + One of the Daily builds
    12/22/2005 8:23:04 PM Creating the USBUIRT device
    12/22/2005 8:23:04 PM USBUIRT:Open
    12/22/2005 8:23:04 PM USBUIRT:Open success:plugin Version: 1.1 (April, 01, 2004)
    Firmware Version: 5.6 (October, 06, 2003)
    12/22/2005 8:23:04 PM USBUIRT:unable to load values from:UIRTUSB-remote.xml
    12/22/2005 8:23:04 PM done creating the USBUIRT device

    When I go into MyTV, channel changes properly:
    12/22/2005 8:23:26 PM USBUIRT: NewChannel=1 LastChannel=
    12/22/2005 8:23:26 PM USBUIRT: send:1


    After updating to firmware v5.9:
    12/22/2005 8:40:34 PM add USBUIRT section
    12/22/2005 8:40:34 PM USBUIRT:Open
    12/22/2005 8:40:34 PM USBUIRT:Open success:plugin Version: 1.1 (April, 01, 2004)
    Firmware Version: 5.9 (March, 26, 2004)
    12/22/2005 8:40:34 PM USBUIRT:unable to load values from:UIRTUSB-remote.xml
    12/22/2005 8:40:34 PM USBUIRT:unable to load tunervalues from:UIRTUSB-tuner.xml

    12/22/2005 8:40:35 PM Load settings:USBUIRT
    12/22/2005 8:40:35 PM LoadSectionSettings()
    12/22/2005 8:40:35 PM USBUIRT: Setting configuration control values
    12/22/2005 8:40:35 PM LoadSectionSettings() done

    Still getting the same error.
    "USBUIRT Driver is not loaded. Please ensure the USBUIRT is properly connected and drivers are installed."
     

    SteveV

    Retired Team Member
  • Premium Supporter
  • October 13, 2005
    340
    0
    Boston, Massachusetts USA
    Hmmm. I made quite a few changes to the UIRTUSB-remote.xml and UIRTUSB-tuner.xml data formats which might be causing some problems when they are loaded.

    Try removing your UIRTUSB-remote.xml and UIRTUSB-tuner.xml from the mediaportal folder (move the files to a different folder). With the files removed, try launching configuration.exe and see if you can learn some codes. If this works, you'll need to re-learn your mp control and tuner codes.

    Steve
     

    Users who are viewing this thread

    Top Bottom