Gday,
Has any one successfully been able to use this card, the Compro T220 with MP? with out all the hassels that the T750 is prone too? Im just wanting to watch/record digital TV using MP. Im running Win XP w/ SP2 and the latest MP from the downloads section
:thx:
Cheers
Timmo
Gday,
Has any one successfully been able to use this card, the Compro T220 with MP? with out all the hassels that the T750 is...
Gday,
Has any one successfully been able to use this card, the Compro T220 with MP? with out all the hassels that the T750 is...
Hey 42yen, check this tread out: MP compact flash tutorial howto
Hey 42yen, check this tread out: MP compact flash tutorial howto
I read on wikipedia that some HTPC users put their OS on a flashdrive to lower heat, power consumption and noise... Has anyone here...
Hi and welcome :)
Not sure what case you are considering, but you might want to Google WD's new GP-series. It is a 3.5", but VERY quiet.
Review: http://techreport.com/articles.x/13379
GL :)
Hi and welcome :)
Not sure what case you are considering, but you might want to Google WD's new GP-series. It is a 3.5", but VERY...
CPU: AMD Athlon X2 BE-2400
MB: MSI K9N NEO-F V3
MEM: Kingston ValueRAM 2GB DDR2 800MHz Kit (2x1GB) CL6
GPU...
I already have an ATI Radeon HD 3870 video card with HDMI 1.3 muxed with 5.1 audio output to a 1080p HDTV. I'm considering adding a tuner card to my computer so I can do away with DVR from the cable company. I've been reading a lot on these forums (and others) but I just can't seem to find what I'm looking for.
Can anyone...
I already have an ATI Radeon HD 3870 video card with HDMI 1.3 muxed with 5.1 audio output to a 1080p HDTV. I'm considering adding...
I already have an ATI Radeon HD 3870 video card with HDMI 1.3 muxed with 5.1 audio output to a 1080p HDTV. I'm considering adding...
Aah, thats exactly what I was wondering about! Why didn't i think about the Wiki :P
Thank you!! :)
Aah, thats exactly what I was wondering about! Why didn't i think about the Wiki :P
Thank you!! :)
Hello
I want to know if the TV-card Digital Everywhere FloppyDTV-T/CI DVB-T (please google) is supported in MediaPortal like...
Hello, I’m looking to setting up a satellite setup but I have some questions. I am living in the Netherlands, by the way.
1. What exactly do I need for a satellite setup? My list as I came up to it is like this: a dish, coax-cables, LNB’s to capture the signal, a DiSeQSC (or something) switch and a smartcard offered by Canal...
Hello, I’m looking to setting up a satellite setup but I have some questions. I am living in the Netherlands, by the way.
1...
Hello, I’m looking to setting up a satellite setup but I have some questions. I am living in the Netherlands, by the way.
1...
For the US you only have to worry about QAM, ATSC and NTSC.
If you've got digital cable.... QAM
OTA digital antennae ... ATSC
OTA analog/ cable analog ... NTSC
Video tape/DVD machines (analog) .... NTSC
I have an HD Homerun for OTA ATSC and a WinTV PVR-150 for my VHS/DVD combo machine (and FM radio). I don't watch that much NTSC...
For the US you only have to worry about QAM, ATSC and NTSC.
If you've got digital cable.... QAM
OTA digital antennae ... ATSC...
I recently put together some hardware for a HTPC. I have a couple issues (mainly with the built-in IR imon receiver), but I'll...
I changed the original motherboard with this one: Gigabyte GA-73PVM-S2H, GeIL DDR2 PC6400 Ultra 2 GB, and a Intel Pentium E2180.
Ihave a clean install of Windows XP Pro and latest Mediaportal. For codec i follwed this: http://users.vic.chariot.net.au/~mitreski/mediaportal%20codec%20guide%20v.2.pdf
To connect to my 37" LG lcd TV...
I changed the original motherboard with this one: Gigabyte GA-73PVM-S2H, GeIL DDR2 PC6400 Ultra 2 GB, and a Intel Pentium E2180...
I changed the original motherboard with this one: Gigabyte GA-73PVM-S2H, GeIL DDR2 PC6400 Ultra 2 GB, and a Intel Pentium E2180...
I think this is down to DRM, no ones producing a DVI out\DVI in solution, as this would give the ultimate in digital copying.
I think this is down to DRM, no ones producing a DVI out\DVI in solution, as this would give the ultimate in digital copying.
Hi..
Are there any tvcards with digital i (HDMI or DVI)? A need to connect my sat reciever with high resolution that scart...
2 x 150 does the same as a 500, butt 2 x 150......
1. Takes up more space in your computer, look at future expandabillity.
2. Requires 2 antenna connections
3. Consumes more power
A PVR500MCE is just a cleaner way of doing it.
2 x 150 does the same as a 500, butt 2 x 150......
1. Takes up more space in your computer, look at future expandabillity.
2...
2 of the 150's would be cheaper, wouldn't they do the same thing as the 1 500??
If not, what would the differences be??
Thanks...
Hardware decode ought to be faster/better than software decode but ..............
As far as I can tell (though it might be an excess of incompetence on my part) some graphics cards dont work with hardware encoding enabled in the cyberlink 7.3 codecs.
I have a recent vintage gigabyte MB with onboard ATI Radeon HD3200 graphics. If...
Hardware decode ought to be faster/better than software decode but ..............
As far as I can tell (though it might be an...
Folks,
I'm planning my first ever HTPC build around MediaPortal, XP Pro SP2 and one of the new IGP's with UVD/PureVideo2 (AMD...
Look for "ir server suite" - it can operate independently of MP, and I believe it has repeater functionality.
Look for "ir server suite" - it can operate independently of MP, and I believe it has repeater functionality.
I was wondering if it's possible to to use the (Microsoft) Media Center IR receiver as a generic IR repeater? :S
Hello,
Since my cable provider (UPC) doesn't provide much channels on encrypted or FTA, I'm looking for a satellite replacement. I actually find it really interesting looking. However, I am a total newbie in DVB-S. But I was wondering about a few things.
- What is DVB-S2? And do I really need it?
- How is the quality of...
Hello,
Since my cable provider (UPC) doesn't provide much channels on encrypted or FTA, I'm looking for a satellite replacement...
Hello,
Since my cable provider (UPC) doesn't provide much channels on encrypted or FTA, I'm looking for a satellite replacement...
*sigh* energy costs must be cheap in your country...
This machine would be almost overpowered for non-gaming jobs. The onboard GPU on ATI's 780G or Nvidia's 8200 boards perfectly handles 1080p.
Regarding the onboard sound: if you use a digital connection you just have to make sure it is supporting 44,1 Khz output for music.
*sigh* energy costs must be cheap in your country...
This machine would be almost overpowered for non-gaming jobs. The onboard GPU...
I've been an HTPC hobbyist for long enough now that I think it's time to build a dedicated HTPC and let my poor, tired desktop take...
Its got some nice touches, wonder how it reacts with the onboard sli option, does sound interesting.
Good luck with the build.
Its got some nice touches, wonder how it reacts with the onboard sli option, does sound interesting.
Good luck with the build.
Hey out there!
I'm going to build a HTPC for my parents... It should be able to play DVB-C HD and in the future perhaps BlueRay...
Hallo
My systems is current:
ASUSTeK Computer Inc.
(Integrated ATI Radeon X1250-based graphics) - HD support 1080p
RAM
Dual 800 MHz, 2 x 1 GB
CPU
AMD AM2, Athlon 64 LE-1600 2.2 GHz
DVB-S2 Card
Hauppauge WinTV-HVR-4000
Software:
WinXP XP2, and all updates. (no sp3 yet)
MediaPortal + TVserver 1.0.0.0
CoreAVG...
Hallo
My systems is current:
ASUSTeK Computer Inc.
(Integrated ATI Radeon X1250-based graphics) - HD support 1080p
RAM...
Hallo
My systems is current:
ASUSTeK Computer Inc.
(Integrated ATI Radeon X1250-based graphics) - HD support 1080p
RAM...
OK, so this thread is a spin-off from a support thread I have started, where I'm trying to work out some problems I'm having with 24p playback.
https://forum.team-mediaportal.com/general-support-51/bad-audio-video-sync-fullscreen-mode-39507/
The thing is that I'm not able to get audio and video in sync, using the following...
OK, so this thread is a spin-off from a support thread I have started, where I'm trying to work out some problems I'm having with...
OK, so this thread is a spin-off from a support thread I have started, where I'm trying to work out some problems I'm having with...
Don´t buy the twinhan
Hello,
i use the Twinhan Mantis 1034 and I don´t recommend this card for some reasons:
The driver are very bad; It causes crashes
You need a very good shielded sattelite cable; If you don´t have one the tv picture will judder or it will not find every channel
The card is very big; You need a big...
Don´t buy the twinhan
Hello,
i use the Twinhan Mantis 1034 and I don´t recommend this card for some reasons:
The driver are...
Hallo.
I'm about to change from analouge to digital TV and I wonder what card I shall choose. I have two suggestions.
Twinhan...
Thanks for the reply. Now I have some more reading and learning to do.
Thanks for the reply. Now I have some more reading and learning to do.
Well here goes. I have been trying to find a way to pipe TV through my HTPC for quite some time and control everything with one...
Hi
I've spent 2 day testing with Terratec cinergy 2400i an with TVE3 RC2 alway get the following messages with some channels:
"Unable to start graph" from tvsetup preview and "Unable create timeshifting/No audio/video ..." from MP
Yesterday I tested card with MP 0.2.3 + SVN 8th april (last one I remember) and the card works...
Hi
I've spent 2 day testing with Terratec cinergy 2400i an with TVE3 RC2 alway get the following messages with some channels...
Hi!
I've been using a dual-tuner Terratec 2400i for a while now. It has worked pretty well and recovered nicely from stand-by...
Touché. Sorry to hear about you're issues. This PC game is hard enough without crappy designed hardware to contend with.
Touché. Sorry to hear about you're issues. This PC game is hard enough without crappy designed hardware to contend with.
Hi,
Now I've got a bit of time I can make others aware of a major problem that wasted over fifty hours of my life, plus a number...
Hi.
Down to the right on the home side of Mediaportal there's a link to this side Supported TVCards - MediaPortal Wiki Documentation
/Juppe
Hi.
Down to the right on the home side of Mediaportal there's a link to this side Supported TVCards - MediaPortal Wiki...
Is there a list of TV Tuners that are already working or proven to work with MediaPortal? I am not good at programming, and would...
MediaPortal hasn't been designed for "media extenders". For them to work with MP, they would need to have their own little MP client written into the firmware of the device. Definitely possible, just not very likely.
Thin clients aren't really suitable for front ends for MediaPortal, mainly because they offer very little in the way...
MediaPortal hasn't been designed for "media extenders". For them to work with MP, they would need to have their own little MP...
I have searched the forums and it looks like there are no "media extenders" that work. Is that still the case? I am considering...
I have used an MCE remote and receiver, as well as a Hauppauge remote (w/ MCE reciever and the IR Server Suite to re-map the remote). The built-in IR receiver doesn't seem to work for any remote other than the Mac one. (The IR suite DOES list "experimental IR receiver support", but I haven't tested it.)
For HDTV, I don't have an HD...
I have used an MCE remote and receiver, as well as a Hauppauge remote (w/ MCE reciever and the IR Server Suite to re-map the...
Can anyone recommend some components for building a completely silent pc for the bedroom that I can use as an HTPC? I'm realy...
I've done some searching and also posted this question a few months back...
Does anyone have a definite answer as to if the Apple Mac Mini (latest model) is an ideal client for streaming HDTV from a MP TV server?
I'm looking to get one and load WinXP on it but am curious on the performance side of things...
Any input would be...
I've done some searching and also posted this question a few months back...
Does anyone have a definite answer as to if the...
I've done some searching and also posted this question a few months back...
Does anyone have a definite answer as to if the...
All I have installed:
Ac3 Filter (passthrough dts/ac3);
CoreAVC Pro (h.264 decoder);
MatroskaSplitter (handles mkv's);
VSFilter (sub's in mkv's);
I then use PDVD8 to decode MPEG2 & FFDSHOW to do everything else.
All I have installed:
Ac3 Filter (passthrough dts/ac3);
CoreAVC Pro (h.264 decoder);
MatroskaSplitter (handles mkv's)...
Hi all
I am building a HTPC. I want to use mediaportal. I have a computer where it should all be streamed from. I have ripped...
I modified the case one more time by adding a 90 mm low noise fan in front of the case which blows fresh air inside the PC and now it is perfect. The rear fans are sucking out the used air with reduced fan speed.
I have to qualify that after several tests under load (1 hour TS video playing) inside MP, the cpu core temperature is a...
I modified the case one more time by adding a 90 mm low noise fan in front of the case which blows fresh air inside the PC and now...
Hi everybody,
my HTPC is working nearly perfect now ;) . The only thing which nerves is the noise of the Intel boxed fan but the...
Ill second dont go with the Via EPIAs, I have one and it will only play SD, which it does ok but Def not HD.
I'm now looking for a AMD AM2 MB with a good Vid card on it thats fanless and then put some kind of heat sink on the CPU.
I think the problem with a Fanless AMD will be the size the epia was so small
Ill second dont go with the Via EPIAs, I have one and it will only play SD, which it does ok but Def not HD.
I'm now looking for...
Ok, here is a task I'm trying to resolve.
I have got a HTPC running MP 0.2.3.0. It's rather large, holds 2TB of data (mostly...
Hello guys!
I'm thinking in buy this TV card, and i wonder how if the IR Blaster is working whit MP?
So i have Cable and a STBox, and i just want to useit through MP.
Also, do i need to use TVE2 or TVE3? i wish No server whit it.
Thnks in advance & Cheers!
Hauppauge WinTV-HVR-1600
Hello guys!
I'm thinking in buy this TV card, and i wonder how if the IR Blaster is working whit MP?
So i have Cable and a STBox...
Hello guys!
I'm thinking in buy this TV card, and i wonder how if the IR Blaster is working whit MP?
So i have Cable and a STBox...
Since austar has barred 3rd party decoders form working with their smart cards, I've given up with the 1030a and am about to buy a dreambox. and get a foxtel subscription.
I could never get the 1030a to work with a 2.26d cam properly. I could never get it to even decode properly so I don't know about multiple stream decoding. good luck
Since austar has barred 3rd party decoders form working with their smart cards, I've given up with the 1030a and am about to buy a...
Hi All
Just wondering if anyone know if this sat card will work well with MP..
Or can anyone suggest the best option for Sat...