after standby (S3): unable to start timeshift, unable to start graph (no TV possible) (1 Viewer)

Rudi99

Portal Pro
October 3, 2007
238
4
Home Country
Germany Germany
My two "skystars" are now recognized by WinXP and MP. (driver etc see MySystem on the left side)

After reboot or first start i can look tv etc. without any problems. Even recording one channel and looking another is working (as expected, wow).

But after standby (into S3, yes, that's working here by remote or by button on htpc-case) there always occurs: "timeshift could not be started, unable to start graph". No tv possible. See also these threads:
https://forum.team-mediaportal.com/...nable-start-graph-obwohl-es-davor-ging-40255/
https://forum.team-mediaportal.com/get-support-90/please-help-cannot-get-2-x-skystar2-work-40401/

Because I couldn't find a solution yet and didn't find any other bug-post for this issue, i post it as official bug now.

What i tried:
- RC1 and all svn's including 19228 (clean installs, with erasing database before :-( )
- timeshift-folder on drive c or e (another internal hdd)
- dvbfix installed
- MP waiting fo tv-server-start
- tv-server delay 3-12sec
- MP start-delay 3 - 15 sec
- restart MP on resume after S3
- issue occurs also with only one tv-card installed

Logs are attached. Can anyone help please, please? So, i can't schedule recordings or have a comfortable quick system-start...
 

Attachments

  • Zwischenablage-2.jpg
    Zwischenablage-2.jpg
    81.3 KB
  • Zwischenablage-4.jpg
    Zwischenablage-4.jpg
    74.9 KB

ronilse

Retired Team Member
  • Premium Supporter
  • July 19, 2005
    4,422
    283
    Moss
    Home Country
    Norway Norway
    Hi,
    So when you restart TVService card works again(if not this it's a driver problem)?

    Regards
    Roy
     

    Rudi99

    Portal Pro
    October 3, 2007
    238
    4
    Home Country
    Germany Germany
    So when you restart TVService card works again(if not this it's a driver problem)?
    No

    For my hauppauge it needs 20 secs, so maybe a setting of 20-30 secs might be worth trying.
    I'll try and soon be back...

    EDIT: ok, now i have set tv-service to wait 30 sec to detect card and MP -start-delay to 30 sec: no solution. It seems, that after resume from S3 the 30 sec (wait tv-server to detect card) is not working, only at first start after reboot! After resume from S3 only MP waits the 30 sec start-delay! (tv-server reinitialize is checked, see screenshots...)

    Any other solution than newer drivers? (i 'm afraid, with the newer SP3-drivers (only beta!) i will have no 2 cards detected and the problem still exists...)
     

    Attachments

    • Zwischenablage-5.jpg
      Zwischenablage-5.jpg
      44 KB
    • Zwischenablage-6.jpg
      Zwischenablage-6.jpg
      46.2 KB
    • Zwischenablage-7.jpg
      Zwischenablage-7.jpg
      45.7 KB

    rtv

    Retired Team Member
  • Premium Supporter
  • April 7, 2005
    3,622
    301
    Osnabruck
    Home Country
    Germany Germany
    Any other solution than newer drivers? (i 'm afraid, with the newer SP3-drivers (only beta!) i will have no 2 cards detected and the problem still exists...)

    Definately a driver issue.
     

    Rudi99

    Portal Pro
    October 3, 2007
    238
    4
    Home Country
    Germany Germany
    Definately a driver issue.
    ... nooooo, aargh... sh§&%$"&$

    so which driver should i prefer: normal (with only 1 card detected by MP) oder BDA (with resume from S3-problem)?

    And why does tv-server not wait the 30 sec before detecting tv-card after resuming from S3?
     

    ronilse

    Retired Team Member
  • Premium Supporter
  • July 19, 2005
    4,422
    283
    Moss
    Home Country
    Norway Norway
    Hi,
    What does the log say about detecting/wait after S3(Detecting Cards in 30 seconds)?

    Btw your first log has that correct, but if it doesn't help with restarting TV Server this it's a driver bug which we can't do much about.....

    Regards
    Roy
     

    Rudi99

    Portal Pro
    October 3, 2007
    238
    4
    Home Country
    Germany Germany
    Latest BIOS is installed, newer are only betas and do not involve any board-issuesthat are needed, like newest cpu-id's etc.. (if you can trust the gigabyte-statements).
     

    Paranoid Delusion

    Moderation Manager
  • Premium Supporter
  • June 13, 2005
    13,062
    2,978
    Cheshire
    Home Country
    United Kingdom United Kingdom
    Btw your first log has that correct, but if it doesn't help with restarting TV Server this it's a driver bug which we can't do much about...

    As Roy said if stopping and then restarting TVServer, and the driver has not loaded correctly, then there is no way TVServer can connect to the card\s.

    Just to put your mind at ease even further to prove this, if you stop TVServer and close config. manually put pc into standby and then resume and restart tvserver, try and see if channels are then associated and can be previewed.

    Make sure before restarting TVServer that both sql browser, sqlserver and sql writer services are running in taskmanager processes.

    After that its back to bum drivers, sorry.
     

    Users who are viewing this thread

    Top Bottom