Anysee 30 Plus support (descramble) | Page 13

Discussion in 'Improvement Suggestions' started by DoctorBob, July 7, 2007.

  1. ifreaky

    ifreaky Portal Member

    Joined:
    February 12, 2010
    Messages:
    12
    Likes Received:
    0
    Ratings:
    +0 / 0
    Home Country:
    Netherlands Netherlands
    I switched back to RC1 because of the Anysee problems. At the time it's fixed i will upgrade.



    Standby mode is also a problem. Splugg or MDAPI is crashing. After a reboot it will work again.
    Another problem is Shutdown, you must shutdown twice. Because of the Anysee CNO.
     
  2. Google AdSense Guest Advertisement



    to hide all adverts.
  3. Mithrandir

    Mithrandir Portal Pro

    Joined:
    March 21, 2008
    Messages:
    53
    Likes Received:
    2
    Ratings:
    +2 / 0
    Home Country:
    Netherlands Netherlands
    Blackeyez,

    I'm currently in Asia and can't open a new topic myself.
    Can you open a new one? Maybe state you do use mdapi but this is not mdapi related as far as we can tell.

    The log you posted i think shows the problem here in the TS reader log:

    Code (Text):
    1.  
    2. 17-04-2010 17:25:13.222 [1bb0]New channel found (PAT/PMT/SDT changed)
    3. 17-04-2010 17:25:13.223 [1bb0] pcr      pid:   30
    4. 17-04-2010 17:25:13.223 [1bb0] pmt      pid:   20
    5. 17-04-2010 17:25:13.223 [1bb0] video    pid:   30 type: MPEG2
    6. 17-04-2010 17:25:13.224 [1bb0] audio    pid:   40 language: dut type: MPEG1 - audio
    7. 17-04-2010 17:25:13.224 [1bb0]Setting initial audio index to : 0
    8. 17-04-2010 17:25:13.225 [1bb0]DeMultiplexer: We detected a new media type change which has a video stream, so we let the mpegParser trigger the event
    9. 17-04-2010 17:25:13.225 [1bb0]demux:Wait for media format change:1
    10. 17-04-2010 17:25:13.225 [1bb0]OnRequestAudioChange()
    11. 17-04-2010 17:25:13.225 [1bb0]demux:Wait for Audio stream selection :1
    12. 17-04-2010 17:25:13.227 [1bb0]New Audio 4
    13. 17-04-2010 17:25:13.228 [1438]CTsReaderFilter::--SeekStart()-- No new seek 27.266000 ( Abs 27.266000 / 27.266417 ) - Stream compensated: 0, OnZap: 0, Force 0, Media changing: 1
    14. 17-04-2010 17:25:13.229 [1438]CTsReaderFilter::--SeekStart()-- No new seek 27.266000 ( Abs 27.266000 / 27.266417 ) - Stream compensated: 0, OnZap: 0, Force 0, Media changing: 1
    15. 17-04-2010 17:25:13.229 [1bb0]Pes 0-0-1 fail
    16. 17-04-2010 17:25:13.230 [1438]CTsReaderFilter::Run(2440.85) state 1 seeking 0
    17. 17-04-2010 17:25:13.228 [1bb4]vid:OnThreadStartPlay(27.266000) 1.00 0
    18. done
    19. 17-04-2010 17:25:13.266 [1438]SetAudioStream : 0
    20. 17-04-2010 17:25:13.266 [1438]Old Audio 4, New Audio 3
    21. 17-04-2010 17:25:13.266 [1438]SetAudioStream : Media already changing
    22. 17-04-2010 17:25:13.266 [1438]demux:Wait for Audio stream selection :0
    23. 17-04-2010 17:25:13.273 [1bb0]Pes 0-0-1 fail
    24. [B]<Removed a BIG piece of repeating failures>[/B]
    25. 17-04-2010 17:25:15.652 [1bb0]Pes 0-0-1 fail
    26. 17-04-2010 17:25:15.797 [1bb0]Pes 0-0-1 fail
    27. 17-04-2010 17:25:15.836 [1bb0]Pes header 0-0-1 fail
    28. 17-04-2010 17:25:15.937 [1bb0]Pes 0-0-1 fail
    29. 17-04-2010 17:25:16.024 [1bb0]Pes header 0-0-1 fail
    30. 17-04-2010 17:25:16.626 [1bb0]Pes 0-0-1 fail
    31. 17-04-2010 17:25:16.648 [1bb0]Pes header 0-0-1 fail
    32. 17-04-2010 17:25:16.814 [1bb0]Pes 0-0-1 fail
    33. 17-04-2010 17:25:16.850 [1bb0]Pes header 0-0-1 fail
    34. 17-04-2010 17:25:17.014 [1bb0]Pes 0-0-1 fail
    35. 17-04-2010 17:25:17.090 [1bb0]Pes header 0-0-1 fail
    36. 17-04-2010 17:25:17.311 [1bb0]Pes header 0-0-1 fail
    37. 17-04-2010 17:25:17.459 [1bb0]Pes 0-0-1 fail
    38. 17-04-2010 17:25:17.484 [1bb0]Pes header 0-0-1 fail
    39. 17-04-2010 17:25:17.609 [1bb0]Pes 0-0-1 fail
    40. 17-04-2010 17:25:17.717 [1bb0]Pes header 0-0-1 fail
    41. 17-04-2010 17:25:17.751 [1bb0]Pes 0-0-1 fail
    42. 17-04-2010 17:25:17.989 [1bb0]Pes header 0-0-1 fail
    43. 17-04-2010 17:25:18.266 [1bb0]Pes header 0-0-1 fail
    44. 17-04-2010 17:25:18.298 [1bb0]Pes 0-0-1 fail
    45. 17-04-2010 17:25:18.450 [1bb0]demux: Alert: Wait for Media change cancelled on 5 secs timeout
    46. 17-04-2010 17:25:18.540 [1bb0]Pes 0-0-1 fail
    47. 17-04-2010 17:25:18.541 [1bb0]Pes header 0-0-1 fail
    48. 17-04-2010 17:25:18.733 [1bb0]Pes 0-0-1 fail
    49. 17-04-2010 17:25:18.832 [1bb0]Pes header 0-0-1 fail
    50. 17-04-2010 17:25:19.140 [1bb0]Pes header 0-0-1 fail
    51. 17-04-2010 17:25:19.337 [1bb0]Pes 0-0-1 fail
    52. 17-04-2010 17:25:19.445 [1bb0]Pes header 0-0-1 fail
    53. 17-04-2010 17:25:19.574 [1bb0]Pes 0-0-1 fail
    54. 17-04-2010 17:25:19.725 [1bb0]Pes header 0-0-1 fail
    55. 17-04-2010 17:25:19.819 [1bb0]Pes 0-0-1 fail
    56. 17-04-2010 17:25:20.038 [1bb0]Pes header 0-0-1 fail
    57. 17-04-2010 17:25:20.370 [1bb0]Pes header 0-0-1 fail
    58. 17-04-2010 17:25:20.634 [1bb0]Pes header 0-0-1 fail
    59. 17-04-2010 17:25:20.797 [1bb0]Pes 0-0-1 fail
    60. 17-04-2010 17:25:20.834 [1bb0]Pes header 0-0-1 fail
    61. 17-04-2010 17:25:20.978 [1bb0]Pes header 0-0-1 fail
    62. 17-04-2010 17:25:21.091 [1bb0]Pes 0-0-1 fail
    63. 17-04-2010 17:25:21.308 [1bb0]Pes header 0-0-1 fail
    64. 17-04-2010 17:25:23.277 [1bb0]Pes 0-0-1 fail
    65. 17-04-2010 17:25:23.405 [1bb0]Pes header 0-0-1 fail
    66. 17-04-2010 17:25:23.608 [1bb0]Pes 0-0-1 fail
    67. 17-04-2010 17:25:23.818 [1bb0]Pes header 0-0-1 fail
    68. 17-04-2010 17:25:23.953 [1bb0]Pes 0-0-1 fail
    69. 17-04-2010 17:25:24.243 [1bb0]Pes header 0-0-1 fail
    70. 17-04-2010 17:25:24.630 [1bb0]Pes header 0-0-1 fail
    71. 17-04-2010 17:25:24.676 [1bb0]Pes 0-0-1 fail
    72. 17-04-2010 17:25:31.292 [1bb0]Pes header 0-0-1 fail
    73. 17-04-2010 17:25:31.794 [1bb0]Pes header 0-0-1 fail
    74. 17-04-2010 17:25:31.862 [1bb0]  MPEG I-FRAME found 29.938000
    75. 17-04-2010 17:25:31.863 [1bb0]DeMultiplexer: 30 video format changed: res=720x576 aspectRatio=16:9 fps=25 isInterlaced=1
    76. 17-04-2010 17:25:31.863 [1bb0]DeMultiplexer: OnMediaFormatChange triggered by mpeg2Parser
    77. 17-04-2010 17:25:31.863 [1bb0]demux:Wait for media format change:1
    78. 17-04-2010 17:25:31.863 [1bb0]DeMultiplexer: triggering OnVideoFormatChanged
    79. 17-04-2010 17:25:31.874 [1bb0]  MPEG First '0' frame found. 29.858000
    80.  
    Edit: Just found posting https://forum.team-mediaportal.com/...ing-between-2-channels-takes-long-time-78815/ as well. Same problems, even same TV channels, different hardware (FloppyDTV). We can also refer to this as it seems to be the exact same problem and error.
     
  4. blackEyEz

    blackEyEz Portal Pro

    Joined:
    July 8, 2009
    Messages:
    170
    Likes Received:
    44
    Location:
    Netherlands
    Ratings:
    +44 / 0
    Home Country:
    Netherlands Netherlands
    ok made a new thread in bugreport section and linked it to the guy having the same problems with a firedtv. I hope a dev wakes up :D
     
  5. stounedi

    stounedi Portal Pro

    Joined:
    December 9, 2008
    Messages:
    67
    Likes Received:
    1
    Ratings:
    +1 / 0
    Hmm...

    If I get a second E30T Plus tuner, should I do anything special to make the card reader work?

    I have atm one E30T Plus and I'm using the MDAPI+Splug.dll method. And it is working fine for me.

    So, if I plug in another tuner with card slot, will MDAPI just create another folder for me and I just copy Splug.dll there?

    Or is it possible this way?
     
  6. rekenaar
    • Premium Supporter

    rekenaar Retired Team Member

    Joined:
    December 17, 2006
    Messages:
    4,421
    Likes Received:
    782
    Ratings:
    +785 / 0
    Home Country:
    South Africa South Africa
    Just a reminder that you are NOT ALLOWED to ask and answer mdapi questions here.
     
  7. stounedi

    stounedi Portal Pro

    Joined:
    December 9, 2008
    Messages:
    67
    Likes Received:
    1
    Ratings:
    +1 / 0
    Oh, sorry.

    I just saw it discussed earlier in this thread so I couldnt guess it isnt allowed.
     
  8. Mithrandir

    Mithrandir Portal Pro

    Joined:
    March 21, 2008
    Messages:
    53
    Likes Received:
    2
    Ratings:
    +2 / 0
    Home Country:
    Netherlands Netherlands
    This is even true if its simply forum members helping each other out without asking help from the Dev team ?
    There is no other option then to use MDAPI in the Netherlands so a total ban is a bit harsh in my view.

    There are 3 options of which i've tried two.

    1. Floppy/FireDTV -> Dead manufacturer. Can't buy the product anymore nor is it supported.
    2. Hauppauge HD PVR, tried it using a Hauppauge HD PVR, Cablecompany STB, USB-UIRT, IR Server Suite. (Tried it but channel change stability and HDPVR stability is lacking, Can cause Vista and W7 to freeze, No EPG)
    3. Anysee E30TC using MDAPI+_SPLUg.dll or Anycam (Tried this as well and out of option 2 and 3 this works a lot better).

    The alternative would be people starting their own forums outside of the view of MP which I think would not be beneficial to anyone.
     
  9. riksmith

    riksmith Portal Pro

    Joined:
    April 18, 2009
    Messages:
    1,856
    Likes Received:
    321
    Gender:
    Male
    Ratings:
    +321 / 0
    Home Country:
    Netherlands Netherlands
    Show System Specs
    Please do not start another discussion about this, see here: https://forum.team-mediaportal.com/newcomers-forum-240/mdapi-softcam-support-again-12620/
     
  10. Mithrandir

    Mithrandir Portal Pro

    Joined:
    March 21, 2008
    Messages:
    53
    Likes Received:
    2
    Ratings:
    +2 / 0
    Home Country:
    Netherlands Netherlands
    That link has been posted a thousand times and is not relevant at all to this discussion.
    That posting is about having no support for mdapi and softcams due to legal issues.
    We are not asking for any support for MDAPI thus Team MP is safely covered.

    It seems now not even users are allowed to help users and that's the point i'm arguing here.
     
  11. rekenaar
    • Premium Supporter

    rekenaar Retired Team Member

    Joined:
    December 17, 2006
    Messages:
    4,421
    Likes Received:
    782
    Ratings:
    +785 / 0
    Home Country:
    South Africa South Africa
    My interpretation - do not ask and answer MDAPI questions on our forums.

    Our forum rules state the following:
    So if one user asks a question, and another users answers it, the it can be interpreted as a tutorial.

    I can see it is frustrating for you, but we need to minimize risk. No further discussion on it please.

    Thanks for understanding :)
     
Loading...

Users Viewing Thread (Users: 0, Guests: 0)

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice
  • About The Project

    The vision of the MediaPortal project is to create a free open source media centre application, which supports all advanced media centre functions, and is accessible to all Windows users.

    In reaching this goal we are working every day to make sure our software is one of the best.

             

  • Support MediaPortal!

    The team works very hard to make sure the community is running the best HTPC-software. We give away MediaPortal for free but hosting and software is not for us.

    Care to support our work with a few bucks? We'd really appreciate it!