ASUS P7131Dual without sound (2 Viewers)
- Thread starter misko903
- Start date
how to work
Hi..
How did you make it work in Mediaportal, i have just bought a asus p7131 dual card, but mp won't detect tryed i believe alomost everything!!!!
Is it right that when windows detects it and installs it it is as a Asustek Tiger Hybrid Capture device??
Hi..
How did you make it work in Mediaportal, i have just bought a asus p7131 dual card, but mp won't detect tryed i believe alomost everything!!!!
Is it right that when windows detects it and installs it it is as a Asustek Tiger Hybrid Capture device??
- Thread starter
- #3
yes, it is allright when it detects as asus tiger hybrid device. you should run mediaportal setup icon and scan all channels. does your power cinema works?
if you want just a tv and radio, you can use www.tv-plugin.com for winamp, or k!tv - kastortv. it works great.
i think you should connect an audio cable to your sndcard to run any broadcasted sound in media portal.
also check latest drivers for your card, if somethink goes wrong
if you want just a tv and radio, you can use www.tv-plugin.com for winamp, or k!tv - kastortv. it works great.
i think you should connect an audio cable to your sndcard to run any broadcasted sound in media portal.
also check latest drivers for your card, if somethink goes wrong
- Thread starter
- #5
you should install somethink like this MyCinema_13-3-14_32bit.zip, downloaded from the site. than install enclosed powerCinema from cyberlink. everythink is easy and step by step.
i think media portal doesnt support sound for our card.
in other programs try to set sound volume in mixer. but i dont know what to increase.
so use VLC media player and:
file: open capture device
press all two buttons refresh list, set both to 713x BDA...
then press advanced options...
check device properties and tuner properties and set your type of input.
pres ok and ok again. there is one more window after it
on tab video decoder select your standard, then OK
on stream imput tab set your resolution and press OK
set your channel and video standard
ON NEXT WINDOW SET YOUR VOLUME!!!
THIS IS THE TAB WHERE YOU SET VOLUME FOR ALL PROGRAMS USING TV CARD!
if it is too high, it is not clear sound.
on next tab - crossbar set "video tuner in" and "video decoder out"
if it doesnt work, try again to run power cinema.
i think media portal doesnt support sound for our card.
in other programs try to set sound volume in mixer. but i dont know what to increase.
so use VLC media player and:
file: open capture device
press all two buttons refresh list, set both to 713x BDA...
then press advanced options...
check device properties and tuner properties and set your type of input.
pres ok and ok again. there is one more window after it
on tab video decoder select your standard, then OK
on stream imput tab set your resolution and press OK
set your channel and video standard
ON NEXT WINDOW SET YOUR VOLUME!!!
THIS IS THE TAB WHERE YOU SET VOLUME FOR ALL PROGRAMS USING TV CARD!
if it is too high, it is not clear sound.
on next tab - crossbar set "video tuner in" and "video decoder out"
if it doesnt work, try again to run power cinema.
United Kingdom
Hi, I also have an Asus 7131 dual, which worked second time for me
(first time the ebay seller had mistakenly sent me a 7135 card... took me ages to work out why I couldn't get it to tune DVB
)
When i downloaded the driver from asus, I couldn't run the included exe so I just used device manager to add the card.
In mediaportal I just leave the sound settings as default.
Not sure if this is any help but at least it should give you hope that it willl work!
(first time the ebay seller had mistakenly sent me a 7135 card... took me ages to work out why I couldn't get it to tune DVB
)When i downloaded the driver from asus, I couldn't run the included exe so I just used device manager to add the card.
In mediaportal I just leave the sound settings as default.
Not sure if this is any help but at least it should give you hope that it willl work!
I have the same problem, the setup.exe in the driver "Cinema-P7131/P7131Dual Driver v13.3.1.4" doesn't work on my computer. It decompresses some files and then an empty error box comes up with the windows error sound (sounds like "bump"). I installed the card via "add hardware" and then searching and selecting the driver in the manually decompressed zip-file.
Unfortunatly only DVB-t works (DVB-t works fine!), i can't get analogue tv or analog radio to work. Any hints?
Perhaps it is a problem with my german version of windows xp or it is interfering with my compro videomate 200.
bye, urev
Unfortunatly only DVB-t works (DVB-t works fine!), i can't get analogue tv or analog radio to work. Any hints?
Perhaps it is a problem with my german version of windows xp or it is interfering with my compro videomate 200.
bye, urev
- Thread starter
- #10
i have windows XP SP2 english with slovak mutation added and all updates. it works fine(not in media portal), but we dont have dvb-t signal, so i dont know if it works also for digital tv.
try to download drivers again, or i can send you my driver. just give me your mail.
try to download drivers again, or i can send you my driver. just give me your mail.
Users who are viewing this thread
Similar threads
I solved it myself, by modifying the host IP-address in the server table of the database,
MariaDB [(none)]> use mptvdb;
Database changed
MariaDB [mptvdb]> SELECT * FROM Server;
+----------+----------+--------------+----------+
| idServer | isMaster | hostName | rtspPort |
+----------+----------+--------------+----------+
|...
I solved it myself, by modifying the host IP-address in the server table of the database,
MariaDB [(none)]> use mptvdb;
Database...
Hello everyone,
I'm going to need help from the community to resolve a TV server crash issue.
I encountered a problem with my...
Yes, works, thanks. Deselecting "Prefer multichannel audio streams" under "Video Player" (under "Players") gives me the stereo stream, by default, in television also. Thanks for your help. N.
Yes, works, thanks. Deselecting "Prefer multichannel audio streams" under "Video Player" (under "Players") gives me the stereo...
Is there a way to set the default audio stream for live TV? The default default, so to speak, for me seems to be English...
It should also work with the LAV codec. There was a discussion about it here.
The cyberlink app should not open, if you start a DVD playback in MP2. Perhaps you mean the cyberlink app starts, if you enter a DVD into the slot. To avoid this you'll have to deactivate autoplay in the windows settings.
Open Windows Settings
Select...
It should also work with the LAV codec. There was a discussion about it here.
The cyberlink app should not open, if you start a DVD...
Hello,
I have installed the latest Media Portal 2 version on a clean new Windows 10 installation. Now I only get sound for some TV...
I'm not sure what the issue was, but I decided to try a different way of solving the problem.
My server has a 2.5Gbps port and the 10Gbps card I added, so I've connected the HD Homerun directly to the 2.5G port, and its solved the problem, I can now copy large multiple files to the server and not suffer with picture issues.
There is...
I'm not sure what the issue was, but I decided to try a different way of solving the problem.
My server has a 2.5Gbps port and the...
My MP1 installation works perfectly, except if I transfer large files to my server.
Network setup.
HD Homerun Quad tuner -...
Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings, advanced options, I switched to UNC paths instead of the default RSS, and it's working very well. Sure I had to figure out the paths, but no big deal.
Maybe helpful for someone in the future. Thanks for the...
Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings...
Hi folks. I have an issue with a new install/integration into my mediaportal system. I have a “mediaportal server” which has the TV...