AtmoWin - improvement discussion (1 Viewer)

[BassFan]

missing Karate light.
maybe your master is not up to date.
but this is not an problem !
push it, as it is.

your has Forget any see top in France.lng

[ChannelAssignment]
0=OFF
1=Haut
2=Droite
3=Bas
4=Gauche
5=Combinée
6=
7=
8=
9=
10=
11=
12=
13=
14=

greets

 

[azzuro]

oh, i'm bad lol
io modify it later.

 

[HomeY]

English translation updated (fixed some typos and some beautifications) and Dutch translation added to master.

 

[HomeY]

@BassFan i noticed that when i force close MediaPortal (from Device Manager) and have the Atmolight option checked to 'Exit with MediaPortal', i'm getting a COM exception.
Is there anything we can do to improve this?

[2014-03-06 14:15:05,711] [Log ] [MPMain ] [ERROR] - Exception: System.Runtime.InteropServices.COMException (0x8001010D): An outgoing call cannot be made as the application is despatching an input-synchronous call. (Exception from HRESULT: 0x8001010D (RPC_E_CANTCALLOUT_ININPUTSYNCCALL))
at AtmoWinRemoteControl.IAtmoLiveViewControl.setLiveViewSource(ComLiveViewSource dwModus)
at MediaPortal.ProcessPlugins.Atmolight.AtmolightPlugin.DisableLEDs()
at MediaPortal.ProcessPlugins.Atmolight.AtmolightPlugin.g_Player_PlayBackStopped(MediaType type, Int32 stoptime, String filename)
at MediaPortal.Player.g_Player.StoppedHandler.Invoke(MediaType type, Int32 stoptime, String filename)
at MediaPortal.Player.g_Player.OnStopped()
at MediaPortal.Player.g_Player.doStop(Boolean keepTimeShifting, Boolean keepExclusiveModeOn)
at MediaPortal.Player.g_Player.Stop()
at MediaPortal.D3D.OnFormClosing(FormClosingEventArgs formClosingEventArgs)
at System.Windows.Forms.Form.WmClose(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at MediaPortalApp.WndProc(Message& msg) Message: An outgoing call cannot be made as the application is despatching an input-synchronous call. (Exception from HRESULT: 0x8001010D (RPC_E_CANTCALLOUT_ININPUTSYNCCALL)) Site : Void setLiveViewSource(AtmoWinRemoteControl.ComLiveViewSource) Source : Atmolight Stack Trace: at AtmoWinRemoteControl.IAtmoLiveViewControl.setLiveViewSource(ComLiveViewSource dwModus)
at MediaPortal.ProcessPlugins.Atmolight.AtmolightPlugin.DisableLEDs()
at MediaPortal.ProcessPlugins.Atmolight.AtmolightPlugin.g_Player_PlayBackStopped(MediaType type, Int32 stoptime, String filename)
at MediaPortal.Player.g_Player.StoppedHandler.Invoke(MediaType type, Int32 stoptime, String filename)
at MediaPortal.Player.g_Player.OnStopped()
at MediaPortal.Player.g_Player.doStop(Boolean keepTimeShifting, Boolean keepExclusiveModeOn)
at MediaPortal.Player.g_Player.Stop()
at MediaPortal.D3D.OnFormClosing(FormClosingEventArgs formClosingEventArgs)
at System.Windows.Forms.Form.WmClose(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at MediaPortalApp.WndProc(Message& msg)

And while shooting a video, i just noticed this also happened (didn't notice anything during playback):

[2014-03-06 15:00:29,752] [Log ] [48 ] [ERROR] - Exception: System.Runtime.InteropServices.COMException (0x8876086C): Exception from HRESULT: 0x8876086C
at MediaPortal.ProcessPlugins.Atmolight.AtmolightPlugin.VideoSurfaceToRGBSurfaceExt(IntPtr src, Int32 srcWidth, Int32 srcHeight, IntPtr dst, Int32 dstWidth, Int32 dstHeight)
at MediaPortal.ProcessPlugins.Atmolight.AtmolightPlugin.AtmolightPlugin_OnNewFrame(Int16 width, Int16 height, Int16 arWidth, Int16 arHeight, UInt32 pSurface) Message: Exception from HRESULT: 0x8876086C Site : Void VideoSurfaceToRGBSurfaceExt(IntPtr, Int32, Int32, IntPtr, Int32, Int32) Source : Atmolight Stack Trace: at MediaPortal.ProcessPlugins.Atmolight.AtmolightPlugin.VideoSurfaceToRGBSurfaceExt(IntPtr src, Int32 srcWidth, Int32 srcHeight, IntPtr dst, Int32 dstWidth, Int32 dstHeight)
at MediaPortal.ProcessPlugins.Atmolight.AtmolightPlugin.AtmolightPlugin_OnNewFrame(Int16 width, Int16 height, Int16 arWidth, Int16 arHeight, UInt32 pSurface)

 

[Lightning303]

Hey,
for some time now i have an issue where the lights of my ambilight dont turn off when they should. Im not 100% sure, but my best guess is that it started when i ran windows update the last time (including updates for .NET).
I was using old versions of AtmoWin and Atmolight from angie, but updated to these versions a few days ago. The problem still occurs however.


Scenario 1:
What i do:
- Start a video
- Start atmolight liveview (remote button)
- Video ends

What i expect:
- Video starts
- Leds go on
- Video ends
- Leds go off

What really happens:
- Video starts
- Leds go on
- Video ends
- Leds stay on with the last colors


Scenario 2:
What i do:
- Start a video
- Start atmolight liveview (remote button)
- Stop atmolight liveview (remote button)
- Video ends

What i expect:
- Video starts
- Leds go on
- Leds go off
- Video ends

What really happens:
- Video starts
- Leds go on
- Leds stay on with the last colors
- Video ends
- Leds go off


So the leds dont go off when they should. At the end of a video they stay on if liveview was enabled. And they also stay on when i use the remote key to turn them off. However they turn off, if a video ends and they allready should be off. E.g. I watch a video for 5 mins, then press remote to turn leds off. The leds stay on with the last colors. 5 mins later when the video ends, the leds go black like i wanted them to do 5 mins ago.

Attached mp and evr logs (only ones created in this time) of both scenarios.

Using sedu board.

 

[HomeY]

I think we need to fix some logging for Atmolight (if possible), because your logs don't show any errors or useful info about your problem.
I can see you disabling the Live View:

[2014-03-06 14:59:34,188] [Log ] [28 ] [INFO ] - atmolight: Set atmoeffect to cemDisabled
[2014-03-06 14:59:34,199] [Log ] [28 ] [INFO ] - atmolight: Set static color to RED=0 GREEN=0 BLUE=0

but no way to see if it really does that.

I'm using both checkboxes in Atmolight to start/exit AtmoWin with MP (or else i often run into COM connection errors). When i stop a video, the LEDs are also stopped, then give a short blink of about 500ms and then they're Off. That's on Win 8.1 with Arduino setup.

I'm still curious how you fixed that button, because i can't get that part to work. Profile switching isn't implemented so it seems, but being able to use the remote to toggle the LiveView would be awesome.

 

[Lightning303]

I think we need to fix some logging for Atmolight (if possible), because your logs don't show any errors or useful info about your problem.
I can see you disabling the Live View:

I agree. Maybe even option to enable debug loggin in atmowin to what kind of data it gets and send out.

I'm still curious how you fixed that button, because i can't get that part to work. Profile switching isn't implemented so it seems, but being able to use the remote to toggle the LiveView would be awesome.

Well, im the boss . I will fix me some food now, and after that i can help you out .

 

[BassFan]

I'm using both checkboxes in Atmolight to start/exit AtmoWin with MP (or else i often run into COM connection errors). When i stop a video, the LEDs are also stopped, then give a short blink of about 500ms and then they're Off. That's on Win 8.1 with Arduino setup.

no Support for Win8 sorry

greets

 

[HomeY]

no Support for Win8 sorry

??? What did i miss ???

 

[azzuro]

Hey, i release the Atmowin 1.0.0.3 now.