Best Remote for IR (2 Viewers)

flyte

Portal Pro
November 26, 2008
81
0
Home Country
Canada Canada
Anyone able to get this remote to work?

PC Remote Control Windows Media Center XP Controller - (eBay.ca item 320319994125 end time 26-Nov-08 01:34:04 EST)

I am confused on how to setup a generic IR receiver/remote in media portal. Where would I attempt to configure this in the remote options page in Media Portal Configuration?


An official Microsoft remote should work without setup out of the box.. at least mine did :) No driver installation needed, No Key mapping or other difficult things to do.. plug it in and it works.

It is if you want more things to do with your remote like opening and closing of other programs then it starts to get complicated.

I'm just looking for a remote/receiver to drive MediaPortal, and nothing else.

I don't think the one I posted is an official Microsoft product (i.e.: it isn't made by MS), however it is advertised to work with Microsoft stuff. Hopefully it works...

What would be the necessary configuration steps in MP Confiuration / Remote Tab? Would I just try each of the tabs on that settings page?
 

Lotsofjazz

MP Donator
  • Premium Supporter
  • January 7, 2008
    462
    42
    Home Country
    Netherlands Netherlands
    Anyone able to get this remote to work?

    PC Remote Control Windows Media Center XP Controller - (eBay.ca item 320319994125 end time 26-Nov-08 01:34:04 EST)

    I am confused on how to setup a generic IR receiver/remote in media portal. Where would I attempt to configure this in the remote options page in Media Portal Configuration?


    An official Microsoft remote should work without setup out of the box.. at least mine did :) No driver installation needed, No Key mapping or other difficult things to do.. plug it in and it works.

    It is if you want more things to do with your remote like opening and closing of other programs then it starts to get complicated.

    I'm just looking for a remote/receiver to drive MediaPortal, and nothing else.

    I don't think the one I posted is an official Microsoft product (i.e.: it isn't made by MS), however it is advertised to work with Microsoft stuff. Hopefully it works...

    What would be the necessary configuration steps in MP Confiuration / Remote Tab? Would I just try each of the tabs on that settings page?

    Just leave everything on default.. probably the remote works with the standard Microsoft Windows driver, and then you should be OK.

    A few additional things you should do:
    To make the green button working make sure you install Mptray. This tiny app, will make sure that if Mediaportal is not running, pressing the green button starts Mediaportal.. while running mediaportal pressing the green button will bring you back to the home screen.

    If you running Windows Vista Home premium or Ultimate, beside Mediaportal, the green button will also start Windows Media Center at the same time. Here is how you can prevent that from happening:

    How to Disable (Uninstall and Remove) Windows Media Center in Vista My Digital Life
     

    flyte

    Portal Pro
    November 26, 2008
    81
    0
    Home Country
    Canada Canada
    Just leave everything on default.. probably the remote works with the standard Microsoft Windows driver, and then you should be OK.

    A few additional things you should do:
    To make the green button working make sure you install Mptray. This tiny app, will make sure that if Mediaportal is not running, pressing the green button starts Mediaportal.. while running mediaportal pressing the green button will bring you back to the home screen.

    If you running Windows Vista Home premium or Ultimate, beside Mediaportal, the green button will also start Windows Media Center at the same time. Here is how you can prevent that from happening:

    How to Disable (Uninstall and Remove) Windows Media Center in Vista My Digital Life


    I don't think my remote (PC Remote Control Windows Media Center XP Controller - (eBay.ca item 320319994125 end time 26-Nov-08 01:34:04 EST)) has the "green button" like the true MS MCE remote does.

    I am using WinXP MCE, but I use MediaPortal because my vid card drivers didn't work in MCE for some reason (Radeon 9800 Pro). And besides, media portal is wayy better.
     

    Lotsofjazz

    MP Donator
  • Premium Supporter
  • January 7, 2008
    462
    42
    Home Country
    Netherlands Netherlands
    Just leave everything on default.. probably the remote works with the standard Microsoft Windows driver, and then you should be OK.

    A few additional things you should do:
    To make the green button working make sure you install Mptray. This tiny app, will make sure that if Mediaportal is not running, pressing the green button starts Mediaportal.. while running mediaportal pressing the green button will bring you back to the home screen.

    If you running Windows Vista Home premium or Ultimate, beside Mediaportal, the green button will also start Windows Media Center at the same time. Here is how you can prevent that from happening:

    How to Disable (Uninstall and Remove) Windows Media Center in Vista My Digital Life


    I don't think my remote (PC Remote Control Windows Media Center XP Controller - (eBay.ca item 320319994125 end time 26-Nov-08 01:34:04 EST)) has the "green button" like the true MS MCE remote does.

    I am using WinXP MCE, but I use MediaPortal because my vid card drivers didn't work in MCE for some reason (Radeon 9800 Pro). And besides, media portal is wayy better.

    I would not worry too much about it, If it comes with software and its own driver, just set to be used with Windows Mediacenter, and it will work in Mediaportal as well.

    You see, it is really simple, Mediaportal buttons = MCE buttons.
    Your remote misses some buttons, like the big green one, but I am sure one of the other buttons (probably the red one) will act just like that.

    Lots
     

    geoffw

    MP Donator
  • Premium Supporter
  • November 28, 2008
    76
    1
    Home Country
    New Zealand New Zealand
    IR Panel

    does anyone have a view that the best IR panel with blaster (non usb) functionality.

    I have harmony remote?

    Geoff
     

    zicoz

    MP Donator
  • Premium Supporter
  • September 3, 2006
    896
    63
    Home Country
    Norway Norway
    I see that the philips remote is pictured under the MS tab in MP config, does that mean that the Philips remote basically is a copy of the MS remote? So everything works the same way?
     

    jang

    Portal Member
    May 25, 2007
    35
    0
    To those using Harmony One, do you need to manual learn buttons?

    I selected my remote as Microsoft MCE remote, and used the Harmony 1. I found that not all things work. If I remember correctly, the "My Videos" on button on the screen doesn't bring you to the videos folder. Some basic commands don't work also.

    How did you configure it? I am confused by the selections there is for remote control.
     

    PWF

    Portal Member
    October 18, 2008
    15
    0
    Phoenix, AZ
    Home Country
    United States of America United States of America
    Anyone able to get this remote to work?

    PC Remote Control Windows Media Center XP Controller - (eBay.ca item 320319994125 end time 26-Nov-08 01:34:04 EST)

    I am confused on how to setup a generic IR receiver/remote in media portal. Where would I attempt to configure this in the remote options page in Media Portal Configuration?

    I have a Harmony 659 that I can't live without. I'm still in the process of building my media center, but I just ordered this remote on Ebay for $10, mainly for the IR port and drivers. I'll let you guys know if it works well once it arrives.

    -ProgramsWithFortran

    Did you ever get this receiver to work with MediaPortal?

    I did, though for some reason I can't get rewind to work. Everything else works great. I have to dig and figure out which remote I set it up as. I just upgraded to 1.0.1 and it killed all my settings so I have to go back and figure them all out again. :(

    Sorry I took so long to respond. My wife and I adopted a little girl a few months ago and that is taking up most of my time. ;)
     

    Users who are viewing this thread

    Similar threads

    MP1 MP2 EPG woes DE
    I had the same problem, I have got it working with EPG123 and batch files to rename move. Only issue is it didn't do time correction so I had to apply +1 in MP2, and when the clocks just changed back I had to then remove the +1. Not ideal and not as plug and play as MC2XML but got ti working before the wife noticed. As it is I had...
    I had the same problem, I have got it working with EPG123 and batch files to rename move. Only issue is it didn't do time...
    Does anyone know how to “fix” the MC2XML application, and hopefully permanently? Mine stopped working sometime after September 29...
    Replies
    19
    Views
    4K
    This is a rather unusual solution, but you could install Home Assistant in a virtual machine on the same HTPC (letting it run in the background) and then use the Roborock integration within Home Assistant to trigger the device. That said, it’s still better to keep the HTPC and the smart home server separate.
    This is a rather unusual solution, but you could install Home Assistant in a virtual machine on the same HTPC (letting it run in...
    I have MediaPortal running on a Windows box in the living room, and I'm thinking about adding a robot vacuum and mop combo to the...
    Replies
    1
    Views
    328
    Looks like there's some kind of error regarding translations that I can't pinpoint about Subcentral. You'll find it in the log file I attached to my previous message. I don't understand it because I use MP in english, I search for subtitles in english and not in my native language, so I can't figure out what's translation got to do...
    Looks like there's some kind of error regarding translations that I can't pinpoint about Subcentral. You'll find it in the log file...
    I don't now what to say, I don't know where to begin. Mediaportal user since 2004. Always a satisfied user, I must add. Lately...
    Replies
    21
    Views
    3K
    Thank you for this tip! I'm moving MP TV Server to a new machine. I installed the 64-bit version and most of the MP firewall rules were set to Public. I couldn't connect to the new TV Server from my old single-seat installation running 32-bit until I changed all MP-related firewall rules on the new machine to Private. Before I did...
    Thank you for this tip! I'm moving MP TV Server to a new machine. I installed the 64-bit version and most of the MP firewall...
    Server and client on modern uptodate Windows 11 desktop. Software is Server and Client version x86 1.38.003 Remote client on...
    Replies
    26
    Views
    4K
    MP1 MP2 1.39 x86 1.39 won't install DE
    That did it, thanks.
    That did it, thanks.
    Before you create this bug report: Make sure that your system (windows, codecs and drivers) is up to date, matching the...
    Replies
    2
    Views
    829
    Top Bottom