Compiling anysee branch from GitHub (2 Viewers)
- Thread starter jehe
- Start date
- February 15, 2011
- 694
- 216
- 59
- Home Country
-
Belgium
- Thread starter
- #83
Hello mm,
After I have watched a time to a film through moving pictures (Thank you Sebastiii for the Blu-ray patch for moving pictures), I have then switch to TV (without stopping the movie) at this moment I had no TV signal. This was about 20.45 H.
After a windows restart I had back TV signal.
Don't know if this has to do with the TV server or with the various plugins that I have installed.
A little more control about the epg would also be welcome.
Jean
After I have watched a time to a film through moving pictures (Thank you Sebastiii for the Blu-ray patch for moving pictures), I have then switch to TV (without stopping the movie) at this moment I had no TV signal. This was about 20.45 H.
After a windows restart I had back TV signal.
Don't know if this has to do with the TV server or with the various plugins that I have installed.
A little more control about the epg would also be welcome.
Jean
- September 1, 2008
- 21,544
- 8,236
- Home Country
-
New Zealand
Hello Jean
Thanks for the feedback!
In the logs it seems like your E7 S2 is working well but your E30 S2 is not. All of the tuning failures in the logs are with the E30 S2; in fact I don't see any successful tunes with the E30...
So to confirm
For example, do you mean:
- control over grabbing times
- control over which tuners are used
- control over which channels are used for grabbing
mm
Thanks for the feedback!
In the logs it seems like your E7 S2 is working well but your E30 S2 is not. All of the tuning failures in the logs are with the E30 S2; in fact I don't see any successful tunes with the E30...
So to confirm
In this case the E30 was used, and it failed.
In this case the E7 was used, and it succeeded.
I don't see any obvious problems...
Can you be more specific?
For example, do you mean:
- control over grabbing times
- control over which tuners are used
- control over which channels are used for grabbing
mm
- February 15, 2011
- 694
- 216
- 59
- Home Country
-
Belgium
- Thread starter
- #85
Hello mm,
Sorry for the delayed response (day trip to the sea).
I think this is partly my fault, I have the E7 just looped through to the E30 (too lazy to lay a second cable to the dish ), I thought that when the first TV card faild the other would take over.
So I thought wrong, the E7 was probably busy with the epg, then I put the TV on and the tvserver switches to E30, which was not possible because the LNB was in use.
So I'll turn off the E30.
Yes those are the things where a bit more control should be.
A search function would also be welcome.
Or a plugin for the epgcollector software is also a good alternative.
no feature request here!
Jean
Ps: I'm not too lazy, but looking for good (3rd) TV card, any suggestions are welcome.
Sorry for the delayed response (day trip to the sea).
I think this is partly my fault, I have the E7 just looped through to the E30 (too lazy to lay a second cable to the dish
), I thought that when the first TV card faild the other would take over.So I thought wrong, the E7 was probably busy with the epg, then I put the TV on and the tvserver switches to E30, which was not possible because the LNB was in use.
So I'll turn off the E30.
Yes those are the things where a bit more control should be.
A search function would also be welcome.
Or a plugin for the epgcollector software is also a good alternative.
no feature request here!
Jean
Ps: I'm not too lazy, but looking for good (3rd) TV card, any suggestions are welcome.
- February 15, 2011
- 694
- 216
- 59
- Home Country
-
Belgium
- Thread starter
- #86
Hello,
Sometimes I get the message "All Cards Busy" while I have no recordings going on.
Everything returns to normal after a restart (windows).
So I have something set wrong?
I have enabled "epg grabbing while timeshifting/recording"?
Jean
Sometimes I get the message "All Cards Busy" while I have no recordings going on.
Everything returns to normal after a restart (windows).
So I have something set wrong?
I have enabled "epg grabbing while timeshifting/recording"?
Jean
- September 1, 2008
- 21,544
- 8,236
- Home Country
-
New Zealand
Hello killer8
I have not released an official installer, but I could PM you with a link if you want to test (official support not provided). Please keep in mind that the smartcard slot is not supported. Do you still want to test?
mm
I have not released an official installer, but I could PM you with a link if you want to test (official support not provided). Please keep in mind that the smartcard slot is not supported. Do you still want to test?
mm
Users who are viewing this thread
Similar threads
If you’re planning to submit a pull request, let’s go through the list of issues and their solutions.
I or someone from the team will create a Jira ticket, and for each ticket, you’ll make the changes and submit a pull request.
This will be transparent and straightforward.
If you’re planning to submit a pull request, let’s go through the list of issues and their solutions.
I or someone from the team...
I'm very glad to see that mediaportal 1 is on github, where ordinary devs with github accounts can make contributions.
Please can...
I don't think so, because MP has no way of knowing at which timestamp the external player stopped playback.
Best way to achieve this would be to use an auto-resume feature in your external player itself. (MPC-HC can do that, I don't know about VLC)
I don't think so, because MP has no way of knowing at which timestamp the external player stopped playback.
Best way to achieve...
Hello Folks,
Is it possible to enable MP to resume in an External Player, where it left off ?
I guess the question also is, can...
I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For the first example, I highlighted the example text and eventually found the location in the menus where I could select the CODE macro to have the example text formatted as a code example. So far, so good...
I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For...
I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For...
Are different people taking turns watching the same thing on the same HTPC?
For me, separating users in MP2 is a drawback, as is the interface.
Simply put, this can't be done in MP1, or rather, it can't be done quickly, because everything would have to be rewritten.
But if each user logs in with their own Windows account, MP1 can...
Are different people taking turns watching the same thing on the same HTPC?
For me, separating users in MP2 is a drawback, as is...
Hello,
Is there a way to integrate a multi-user interface in MP1 where you can create different end users, similar to MP2? A...
maybe setting loglevel to debug might pinpoint the difference between normal and stuck?
Preferable with as much disabled as possible
also try to see if anything is happening during stuck for the mediaportal process(resource monitor, disk activity, cpu usage, anything)
maybe other programs competing for resouces?
maybe setting loglevel to debug might pinpoint the difference between normal and stuck?
Preferable with as much disabled as...
Since over a year my MP sometimes stucks while showing the welcome screen. It started once a week now it happens every second time...
