default keymap (1 Viewer)
- Thread starter optymind
- Start date
Australia
That button is one of the 'hard-wired" buttons in the MCE Remote's HID driver. You can only remap it by disabling the HID driver or moving to the replacement driver (there are consequences for either).
Refer to my reply to you other post here:
https://forum.team-mediaportal.com/mce_remote_remapping_suggestion-t30757.html?t=30757
Cheers,
Refer to my reply to you other post here:
https://forum.team-mediaportal.com/mce_remote_remapping_suggestion-t30757.html?t=30757
Cheers,
Users who are viewing this thread
Similar threads
I have also had this problem in the past. There are two components to this problem:
Your internet router is pinging the HTPC at regular intervals in order to see if the HTPC is still present on the network.
The network adapter in the HTPC has "Wake on Lan" enabled. So at the end of a recording, the HTPC transitions from away mode to...
I have also had this problem in the past. There are two components to this problem:
Your internet router is pinging the HTPC at...
Nachdem ich mp 1.38 neu installiert habe klappt soweit alles wie früher. Ein Problem besteht aber und das ist Standby nach einer...
I was just tinkering with a few settings in the MediaPortal configuration and am happy to have found the cause of the problem.
Disabling the option "Single seat setup: force RTSP usage" under "TV/Radio", "Advanced Options" resolved the issue.
After I disabled this option, I was able to delete the recordings the first time...
I was just tinkering with a few settings in the MediaPortal configuration and am happy to have found the cause of the problem...
Deleting recordings sometimes doesn't work.
Neither the 0 button nor the Info/Delete button works.
Nothing happens at all with...
Fixed, I think.
Certainly the vintage MP2 installer that I was using no longer installs the LAV filters. I can only assume that these were never part of the install package itself, but rather downloaded during the install, and that link no longer exists. Shame that the installer doesn't indicate this.
Last time when I installed the...
Fixed, I think.
Certainly the vintage MP2 installer that I was using no longer installs the LAV filters. I can only assume that...
Hi all,
I've recently retired my MP2 setup for my main HTPC and gone back to separates, but I wanted to retain the ability to play...
Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use just to control volume and standby, will no longer put my devices (TV & AVR) to sleep when the HTPC is put in standby. Also when I wake up the HTPC MP closes or crashes (not sure which) as per the example in...
Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use...
Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use...
4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0 on Windows 7 SP1
4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0...
My TV PC is more a cast-off on older hardware (a 'Quiet PC' i5 4690, 16GB ram, 2xSSD 1xHDD, system graphics), mainly as a cheap way...
