Does PowerSheduler work even without TV card? (1 Viewer)
- Thread starter maysider
- Start date
United Kingdom
Powerscheduler looks for record times, usually from EPG which links to TV card.
I take it if you enter TV, it comes up with a message like "no TV card found", this is where you may not be able to test this side of things.
The best way around is to use the alarm plugin, and set a short time ahead, ie 15 minutes, and then use powerscheduler to put into standby/hibernate.
This should test whether you can successfully go in and out of standby/hibernation.
If this is a way of choosing a TV card, then try to stick with PCI/PCI-e cards, as ALL usb cards have some driver difficulties with MediaPortal after resume (pvr-scheduler gets around some of them) but if you just want MP running stick to internal cards (non usb).
Regards
I take it if you enter TV, it comes up with a message like "no TV card found", this is where you may not be able to test this side of things.
The best way around is to use the alarm plugin, and set a short time ahead, ie 15 minutes, and then use powerscheduler to put into standby/hibernate.
This should test whether you can successfully go in and out of standby/hibernation.
If this is a way of choosing a TV card, then try to stick with PCI/PCI-e cards, as ALL usb cards have some driver difficulties with MediaPortal after resume (pvr-scheduler gets around some of them) but if you just want MP running stick to internal cards (non usb).
Regards
Try it and find out. but do not be surprised if mediaportal locks up on resume.
Thats why i suggested setting a alarm time, which goes via the powerscheduler plugin just to launch mediaportal.
All you want to know, does hibernation work ok for you and that is the easiest way to find out.
Thats why i suggested setting a alarm time, which goes via the powerscheduler plugin just to launch mediaportal.
All you want to know, does hibernation work ok for you and that is the easiest way to find out.
- February 5, 2006
- 193
- 0
- Thread starter
- #5
sleeper
http://www.passmark.com/products/sleeper.htm
tested my PC successfully, but alarm didnt worked.....so I will test it again a Ill make a report
http://www.passmark.com/products/sleeper.htm
tested my PC successfully, but alarm didnt worked.....so I will test it again a Ill make a report
Hi,
If you have scheduled a WebEPG grab it should work without a tuner card installed (it coud give errors after the grab, that i dunno since i havn't tested it).
My Alarm plugin still have some minor issues (still testing/adding to Mantis) with repeatable tasks, but wake up once to play a internet stream should work ok.
Regards
Roy
If you have scheduled a WebEPG grab it should work without a tuner card installed (it coud give errors after the grab, that i dunno since i havn't tested it).
My Alarm plugin still have some minor issues (still testing/adding to Mantis) with repeatable tasks, but wake up once to play a internet stream should work ok.
Regards
Roy
My expreriences is that PowerScheduler has difficulties while no EPG is present. I have no internet connection at home (sounds strange to you... yes, there are such areas...) and it makes big troubles to PowerScheduler and scheduled recordings.
However, this whole staff is great!
However, this whole staff is great!
Users who are viewing this thread
Similar threads
MP1
MP2
1.38
Running TVService as "NT Service\TVService" or "Local Service" not working anymore since Windows September 2025 updates
DE
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
I used to run the TVService under the "NT Service\TVService" account to follow least privileges principal (not exposing my whole...
MP1
MP2
1.37
Seeking within a program after changing channels does not work while watching live TV
DE
@CyberSimian Sorry, I missed your last post. I ended up doing a clean install on the client and all is well now. It still doesn't let me go back in time when I change channels but it does continue operating from that point on. I'm ok with that. Thanks for your help!
EDIT: I now downgraded the server (as I did with the client above)...
@CyberSimian Sorry, I missed your last post. I ended up doing a clean install on the client and all is well now. It still doesn't...
When I first start watching a TV program the timeshift functions works perfectly. I can shift back and forth in time and it works...
See my reply in the other thread.
-- from CyberSimian in the UK
See my reply in the other thread.
-- from CyberSimian in the UK
Any idea where can I get the Windows7 installation software for this AverMedia A323AF card. I found the drivers for the A323 which...
So, you're power cycling the TV, but not putting the PC to sleep ?
In General => Startup/Resume settings, try checking "Ignore Windows resolution/size changes"
In Codecs and Render, try selecting the specific audio device rather than "Default DirectSound device"
Just ideas, no guarantee this will do anything.
If this doesn't work, I...
So, you're power cycling the TV, but not putting the PC to sleep ?
In General => Startup/Resume settings, try checking "Ignore...
I'm running MP1 as a client only on this:
https://www.amazon.com/dp/B0DZX5DWS5?ref_=pe_123509780_1038749300_t_fed_asin_title&th=1...
Hi Gcarr, thanks for the reply, I downloaded the file and reinstalled it in Win7 Pro, it work, but only for the TV tuner and not the FM tuner. :-(.
It was worth trying anyway. :cool:
Hi Gcarr, thanks for the reply, I downloaded the file and reinstalled it in Win7 Pro, it work, but only for the TV tuner and not...
I have been trying to build an ultimate HTPC mini system. Seneca case, Intel DH61AG MOB, i7 3770 CPU, special adapters to use the...