Finally working IP-TV solution for TV Server! (1 Viewer)

[rRalv]

Hi. I have scanned and found all channels from my IPTV provider, and I'm able to watch them in the TV-Server preview.
I have also mapped all channels but none of them shows up in MP when trying to watch tv.

any ideas what is going wrong here?

I had the same problem and was by codecs.

I solved it with the following codecs (I use Elecard filters):
* MPEG-2 Video decoder: Elecard MPEG-2 Video Decoder HD.
* H.264 Video decoder: CoreAVC Video Decoder.
* MPEG / AC3 audio decoder: AC3Filter.

The versions I used are:
* Elecard: "Elecard MPEG-2 Decoder & Streaming Plug-in for WMP 3.7.90209"
* CoreAVC: "CoreAVC Professional Edition 1.9.5"
* AC3: "AC3Filter v1.51a"

Unfortunately Elecard and CoreAVC are not free.

 

[ripk]

interface binding with built-in filter

Hi mikeyko,

Thank you for doing great work on the IPTV front!

We discussed this a while ago and now that your built-in filter is up and running, would you consider adding the possibility to bind to a network interface rather than to a fixed IP address? My provider requires me to use DHCP and I have to rescan all the channels every time I get a new IP, which is kind of annoying

I do not know if it is an easy thing to implement but it would be a great feature!

 

[ChevyDK]

Hi. I have scanned and found all channels from my IPTV provider, and I'm able to watch them in the TV-Server preview.
I have also mapped all channels but none of them shows up in MP when trying to watch tv.

any ideas what is going wrong here?

I had the same problem and was by codecs.

I solved it with the following codecs (I use Elecard filters):
* MPEG-2 Video decoder: Elecard MPEG-2 Video Decoder HD.
* H.264 Video decoder: CoreAVC Video Decoder.
* MPEG / AC3 audio decoder: AC3Filter.

The versions I used are:
* Elecard: "Elecard MPEG-2 Decoder & Streaming Plug-in for WMP 3.7.90209"
* CoreAVC: "CoreAVC Professional Edition 1.9.5"
* AC3: "AC3Filter v1.51a"

Unfortunately Elecard and CoreAVC are not free.

I will have to try the Elecard stuff then.
I am quite confused on what I have to download from their site, do you have a link for the correct stuff to download?
I could then try it with the 30 days trial period.

 

[orelorel]

I have scanned channels, in TV-Server they have appeared, and in Media Portal they are not present. Prompt where them to find in Media Portal.

Excuse for my English language.

 

[ChevyDK]

Sounds like the same problem I have, and I have not solved it yet.

 

[rRalv]

Hi. I have scanned and found all channels from my IPTV provider, and I'm able to watch them in the TV-Server preview.
I have also mapped all channels but none of them shows up in MP when trying to watch tv.

any ideas what is going wrong here?

I had the same problem and was by codecs.

I solved it with the following codecs (I use Elecard filters):
* MPEG-2 Video decoder: Elecard MPEG-2 Video Decoder HD.
* H.264 Video decoder: CoreAVC Video Decoder.
* MPEG / AC3 audio decoder: AC3Filter.

The versions I used are:
* Elecard: "Elecard MPEG-2 Decoder & Streaming Plug-in for WMP 3.7.90209"
* CoreAVC: "CoreAVC Professional Edition 1.9.5"
* AC3: "AC3Filter v1.51a"

Unfortunately Elecard and CoreAVC are not free.

I will have to try the Elecard stuff then.
I am quite confused on what I have to download from their site, do you have a link for the correct stuff to download?
I could then try it with the 30 days trial period.

The Elecard decoder: http://www.elecard.com/ftp/pub/mpeg/decoder/EMPEG-2_PlugIn_WMP.zip
extracted form: Elecard Group - Elecard MPEG-2 PlugIn for WMP - codec pack, mpeg2 decoder, decoding, receiving streaming video
Its version is v.4.0.90626, but I think it will work.

The AC3Filter: AC3Filter downloads | AC3Filter
In this link you can download the version v1.51a (AC3Filter 1.51a Installer), or last v1.63b (AC3Filter 1.63b Full) I think it also works.

 

[jacobhoegh]

DVB-IP mms and rstp internet feed

Hi in the latest release you can add new stations whiyout the use of elcard software.

But i can not make this work. It works whit VLC Player. But not in MP

mms://straumV.nrk.no/nrk_tv_webvid03_m
rtsp://rtsplive.dr.dk:80/livestream32.sdp

 

[mikeyko]

Hi in the latest release you can add new stations whiyout the use of elcard software.

But i can not make this work. It works whit VLC Player. But not in MP

mms://straumV.nrk.no/nrk_tv_webvid03_m
rtsp://rtsplive.dr.dk:80/livestream32.sdp

Internet feeds are not supported, this is plugin for IPTV. IPTV is TV over IP protocol, you have to pay subscription like for DVB-C

 

[dimka]

Hi in the latest release you can add new stations whiyout the use of elcard software.

But i can not make this work. It works whit VLC Player. But not in MP

mms://straumV.nrk.no/nrk_tv_webvid03_m
rtsp://rtsplive.dr.dk:80/livestream32.sdp

Internet feeds are not supported, this is plugin for IPTV. IPTV is TV over IP protocol, you have to pay subscription like for DVB-C

I have "changed a bit" version of this filter which is supporting http feeds.

 

[mikeyko]

Hi in the latest release you can add new stations whiyout the use of elcard software.

But i can not make this work. It works whit VLC Player. But not in MP

mms://straumV.nrk.no/nrk_tv_webvid03_m
rtsp://rtsplive.dr.dk:80/livestream32.sdp

Internet feeds are not supported, this is plugin for IPTV. IPTV is TV over IP protocol, you have to pay subscription like for DVB-C

I have "changed a bit" version of this filter which is supporting http feeds.

great, so can you publish your changes?