Noticed that this doesn't seem to be supported, so I had a bit of a play with the capture cards file adn graphedit.
Windows thinks the card is 2 HDTV cards, one USB and the other PCI.
By using the settings that were already there and modifying the recognition strings slightly I was able to get them up and running.
They both seem to be running. I have viewed some TV and autotuned with both. It seems to work OK.
WARNING: This has only been tested for a few minutes.
You should add the following sections to the capturecarddefinitions file and use Dual 1 for the FusionHDTV tuner and dual 2 for the bluebird (USB) tuner.
The sections you need to add are:
<capturecard commercialname="Dvico FusionHDTV Dual 1" capturename="FusionHDTV, Transport Stream Capture" devid="ven_14f1&dev_8802&subsys_db5018ac&rev_05">
<capabilities tv="true" radio="false" mpeg2="true" mce="false" sw="false" bda="true"></capabilities>
<tv>
<interface cat="capture" video="3" audio="4" mpeg2="1" sectionsandtables="2"></interface>
<filters>
<filter cat="networkprovider" name="Microsoft DVBT Network Provider" checkdevice="false"></filter>
<filter cat="tunerdevice" name="FusionHDTV, BDA Tuner" checkdevice="true"></filter>
<filter cat="capture" name="FusionHDTV, Transport Stream Capture" checkdevice="true"></filter>
</filters>
<connections>
<connection sourcefilter="networkprovider" sourcepin="0" sinkfilter="tunerdevice" sinkpin="0"></connection>
<connection sourcefilter="tunerdevice" sourcepin="0" sinkfilter="capture" sinkpin="0"></connection>
</connections>
</tv>
</capturecard>
<capturecard commercialname="Dvico FusionHDTV Dual 2" capturename="Bluebird, WDM TsCapture" devid="vid_0fe9&pid_db50">
<capabilities tv="true" radio="false" mpeg2="true" mce="false" sw="false" bda="true"></capabilities>
<tv>
<interface cat="capture" video="3" audio="4" mpeg2="1" sectionsandtables="2"></interface>
<filters>
<filter cat="networkprovider" name="Microsoft DVBT Network Provider" checkdevice="false"></filter>
<filter cat="tunerdevice" name="Bluebird, BDA Tuner" checkdevice="true"></filter>
<filter cat="capture" name="Bluebird, WDM TsCapture" checkdevice="true"></filter>
</filters>
<connections>
<connection sourcefilter="networkprovider" sourcepin="0" sinkfilter="tunerdevice" sinkpin="0"></connection>
<connection sourcefilter="tunerdevice" sourcepin="0" sinkfilter="capture" sinkpin="0"></connection>
</connections>
</tv>
</capturecard>
Windows thinks the card is 2 HDTV cards, one USB and the other PCI.
By using the settings that were already there and modifying the recognition strings slightly I was able to get them up and running.
They both seem to be running. I have viewed some TV and autotuned with both. It seems to work OK.
WARNING: This has only been tested for a few minutes.
You should add the following sections to the capturecarddefinitions file and use Dual 1 for the FusionHDTV tuner and dual 2 for the bluebird (USB) tuner.
The sections you need to add are:
<capturecard commercialname="Dvico FusionHDTV Dual 1" capturename="FusionHDTV, Transport Stream Capture" devid="ven_14f1&dev_8802&subsys_db5018ac&rev_05">
<capabilities tv="true" radio="false" mpeg2="true" mce="false" sw="false" bda="true"></capabilities>
<tv>
<interface cat="capture" video="3" audio="4" mpeg2="1" sectionsandtables="2"></interface>
<filters>
<filter cat="networkprovider" name="Microsoft DVBT Network Provider" checkdevice="false"></filter>
<filter cat="tunerdevice" name="FusionHDTV, BDA Tuner" checkdevice="true"></filter>
<filter cat="capture" name="FusionHDTV, Transport Stream Capture" checkdevice="true"></filter>
</filters>
<connections>
<connection sourcefilter="networkprovider" sourcepin="0" sinkfilter="tunerdevice" sinkpin="0"></connection>
<connection sourcefilter="tunerdevice" sourcepin="0" sinkfilter="capture" sinkpin="0"></connection>
</connections>
</tv>
</capturecard>
<capturecard commercialname="Dvico FusionHDTV Dual 2" capturename="Bluebird, WDM TsCapture" devid="vid_0fe9&pid_db50">
<capabilities tv="true" radio="false" mpeg2="true" mce="false" sw="false" bda="true"></capabilities>
<tv>
<interface cat="capture" video="3" audio="4" mpeg2="1" sectionsandtables="2"></interface>
<filters>
<filter cat="networkprovider" name="Microsoft DVBT Network Provider" checkdevice="false"></filter>
<filter cat="tunerdevice" name="Bluebird, BDA Tuner" checkdevice="true"></filter>
<filter cat="capture" name="Bluebird, WDM TsCapture" checkdevice="true"></filter>
</filters>
<connections>
<connection sourcefilter="networkprovider" sourcepin="0" sinkfilter="tunerdevice" sinkpin="0"></connection>
<connection sourcefilter="tunerdevice" sourcepin="0" sinkfilter="capture" sinkpin="0"></connection>
</connections>
</tv>
</capturecard>