How to setup a SAT>IP client (1 Viewer)

[heinz-dieter]

Does this screencapture tell anything about the problem or should I use to upload the whole log?

 

[KayDiefenthal]

the complete capture is better to analyze

 

[heinz-dieter]

This is the complete communication capture of the Channel scan made with Wireshark.

 

[KayDiefenthal]

thanx

first in Setup is no pids Parameter include
second in Play is it in with pids=0 it Looks like that there not 16 and 17 is included with other words sdt and nit tabels are not readed

 

[heinz-dieter]

I don't know, if I understand that right. I tested different Settings in Tuner Settings. I also tested the Discovery-tool, but both doesn´t work. (DVBViewer is working well)

 

[breese]

Just by chance, have you seen / read this?
Seems most important part is about 1/2 way down

http://wiki.team-mediaportal.com/1_...ver_Configuration/02_TV_Servers/6_Scan_DVB-IP

 

[KayDiefenthal]

I don't know, if I understand that right. I tested different Settings in Tuner Settings. I also tested the Discovery-tool, but both doesn´t work. (DVBViewer is working well)

in the discovery tool had you there select the device ?

 

[heinz-dieter]

Now I got the configuration. But I don't find the file to modify.

 

[Portisch]

Sorry for the slow response. Somehow I missed your post until now.

I see what you mean.
The only reason why the tuners are in the tuner list is because it was successfully detected in the past. Unfortunately I can't see that in the log files. I also can't see any reason why the tuner would not be detected now.

Can you try to power cycle the tuner?

I power cycled the PC and the tuner several times, but the status isn't changing.
Any idea?