[WiP] madVR support in MP1 (140 Viewers)

[alexdepalma]

Well guys, you are not going to believe me....

I have a Ghost channel. Yes its true. Between 2 channels when I'm zapping i can select another one that freezes MP.
I'm on channel A. zap to next channel (B) but it goes to a blank channel GUI (not B yet)
Let me explain. When you zap channels with remote Channel UP or down (+ or -) you ear the Mp clic for every channel. Every clic the MP Gui shows for a few seconds a GUI with channel logo, program content, etc... OK. If you click quickly to your next channel, this Gui updates the info for next channel and so on. If you stay in the GUI then the TV card actually tunes that channel.

So between A and B on TV server and TV guide, there is no channel. But when Zapping between A and B on my setup, there is a channel that doesn't show GUI, but if I leave on the screen MP freezes. TV server doesn't tune anything.


Nuts!


I need to look for them if any additional, but is the cause of my last freezes and reports.

 

[joecrow]

Hi there,

as i read the post in regards to 3D switching ...i recognized this is something i "need" to have implemented too I dont have a 3D TV yet but will get one soon so did some quick test with manual switching via keyboard shortcuts (t and z for testing) so here is what i did:

View attachment 179517 View attachment 179518 View attachment 179519

Somehow it works but it does not seem to be the best solution because video seems to hang sometimes after switching even when the movie is paused before.
But maybe this would be another starting point at least if you would want to switch manually

Update: Just checked once more you just have to pause twice .. before and after switching and it seems to work fine.

Greetings

I did pretty much exactly the same as you and had no problem switching between 3D and 2D while the video was playing, it does flash around a bit but does work OK, did not try pausing first. My problem is that I cannot get it to toggle the 2 profiles via a single shortcut at the group profile level (no rules) it swirtches off but there it stays, I can set up an if script to default to 3D-on but still no help. Still playing with it

 

[kenwonders]

I hadn't mentioned that it once split out 720p and may do again in future hence the double reference to the Normal profile...[DOUBLEPOST=1464952182][/DOUBLEPOST]I can see why you'd want EVR under normal circumstances now, as these are about the same or worse than normal EVR except with 3d ability

With Videos I can apply a lot of post processing (except for 3D). On TV viewing... mmm problematic.... I still don't know. There have been versions that allowed much more processing, but others... just minimal.
As soon as we get closer to Final, Ill be applying more post processing.
Today I've removed ComSkip Launcher on TV Server, just in case...

Hi there,

as i read the post in regards to 3D switching ...i recognized this is something i "need" to have implemented too I dont have a 3D TV yet but will get one soon so did some quick test with manual switching via keyboard shortcuts (t and z for testing) so here is what i did:

View attachment 179517 View attachment 179518 View attachment 179519

Somehow it works but it does not seem to be the best solution because video seems to hang sometimes after switching even when the movie is paused before.
But maybe this would be another starting point at least if you would want to switch manually

Update: Just checked once more you just have to pause twice .. before and after switching and it seems to work fine.

Greetings

Have you tried setting the 'disable os support' checkbox and option in the non 3d section? That might trigger the events to jump out of 3d better.

 

[Sebastiii]

Here a crash on channel change. Its really hader to get a crash. but here are 2 (freezed need to kill app)

And a MadVr report on DXVA Procesing failed

This looks strange because it was hitting a code that shouldn't be reached with madvr !

if (GUIGraphicsContext.VideoRenderer == GUIGraphicsContext.VideoRendererType.VMR9)
        {
          SetDeinterlacePrefs();
          ......

 

[Sebastiii]

Here we go for V100 bin
There is the subtitle fix and maybe something that can try to fix the SD to HD to SD issue that lead to madvr processing failed.
In fact this message can happen because i hide the video window and it can be normal, but it shoudn't happen if we are in fullscreen and i notice that it happen on previous build lol.

 

[Sebastiii]

Well guys, you are not going to believe me....

I have a Ghost channel. Yes its true. Between 2 channels when I'm zapping i can select another one that freezes MP.
I'm on channel A. zap to next channel (B) but it goes to a blank channel GUI (not B yet)
Let me explain. When you zap channels with remote Channel UP or down (+ or -) you ear the Mp clic for every channel. Every clic the MP Gui shows for a few seconds a GUI with channel logo, program content, etc... OK. If you click quickly to your next channel, this Gui updates the info for next channel and so on. If you stay in the GUI then the TV card actually tunes that channel.

So between A and B on TV server and TV guide, there is no channel. But when Zapping between A and B on my setup, there is a channel that doesn't show GUI, but if I leave on the screen MP freezes. TV server doesn't tune anything.


Nuts!


I need to look for them if any additional, but is the cause of my last freezes and reports.

What is the TVZapOSD ? are you able to disable that ? it seems to cause a lot of issue from your log !

 

[kenwonders]

Party time!!!!!

[DOUBLEPOST=1464980263][/DOUBLEPOST]Here's some useful content for your Seb, the DVD navigation issue is GONE from V97, the BT DVD I had issues with is now perfect, as are others. Dare I check V100...

 

[Sebastiii]

For @alexdepalma, attached is TvPlugin with some check against null reference exception maybe it will be better for the GHOST channel

You surely need to start MP with /avoidversioncheck on shortcut

 

[alexdepalma]

Well guys, you are not going to believe me....

I have a Ghost channel. Yes its true. Between 2 channels when I'm zapping i can select another one that freezes MP.
I'm on channel A. zap to next channel (B) but it goes to a blank channel GUI (not B yet)
Let me explain. When you zap channels with remote Channel UP or down (+ or -) you ear the Mp clic for every channel. Every clic the MP Gui shows for a few seconds a GUI with channel logo, program content, etc... OK. If you click quickly to your next channel, this Gui updates the info for next channel and so on. If you stay in the GUI then the TV card actually tunes that channel.

So between A and B on TV server and TV guide, there is no channel. But when Zapping between A and B on my setup, there is a channel that doesn't show GUI, but if I leave on the screen MP freezes. TV server doesn't tune anything.


Nuts!


I need to look for them if any additional, but is the cause of my last freezes and reports.

What is the TVZapOSD ? are you able to disable that ? it seems to cause a lot of issue from your log !

I don't know what's TVZapOSD... Sorry...

 

[Sebastiii]

Well guys, you are not going to believe me....

I have a Ghost channel. Yes its true. Between 2 channels when I'm zapping i can select another one that freezes MP.
I'm on channel A. zap to next channel (B) but it goes to a blank channel GUI (not B yet)
Let me explain. When you zap channels with remote Channel UP or down (+ or -) you ear the Mp clic for every channel. Every clic the MP Gui shows for a few seconds a GUI with channel logo, program content, etc... OK. If you click quickly to your next channel, this Gui updates the info for next channel and so on. If you stay in the GUI then the TV card actually tunes that channel.

So between A and B on TV server and TV guide, there is no channel. But when Zapping between A and B on my setup, there is a channel that doesn't show GUI, but if I leave on the screen MP freezes. TV server doesn't tune anything.


Nuts!


I need to look for them if any additional, but is the cause of my last freezes and reports.

What is the TVZapOSD ? are you able to disable that ? it seems to cause a lot of issue from your log !

I don't know what's TVZapOSD... Sorry...

Me too but it lead to a lot of error