[WiP] madVR support in MP1 (25 Viewers)

[daWooky]

hi guys,
tried v251+sc-fix bin on htpc yesterday with 3dmvc -seems detected right and also nicely running but without any control at all, similar like the ov control loss exept even no stop or pause....
at least no problems with the screensaver^^

v259 -a quick window tryout while waiting at work

queue seems filled up as it should (but the test was on a strong w7 workstation) lav decoder acceleration set to none
i'll try it deeply tonight, as soon as possible.

merci seb

 

[joecrow]

Further to my earlier post on the screensaver problem:- Screensaver is being actioned while playing content in TV, TVS,Mov.Pic, MyVideo but amazingly NOT in OLV. Tried various different settings but to no avail.
Hope you can figure it out Seb.
P.S. Also no problem with the screensaver when streaming a vid in my browser and MP closed.

Or playing a vid in MPC-HC
(UPDATE)
When zapping in TV I am getting intermittent frozen vid (from old channel) with audio (from the new channel) and hung control. MP eventually either crashes or I have to close it via Task Manaager, see attached logs.
Going back to v247

UPDATE 2
No sweat on that log, same problem with v247, I forgot I had played with some Madvr settings and I guess I over did it, reset to my normal and all is well, going back to v259.

 

[daWooky]

woho, i'm drunk but that's one small osd too much ^^
(is that the skin setup bug u mentioned seb?)

v259 -@client:
so, have again tested the window mode.
it seems here, if you start the videos directly in the small window it is ok but if you change from big to small the queue is not filled

full -> alt+enter-->

directly played from window mode -->

and the minimode is not scaled



v259-@htpc:
the fullscreen usage was ok. series and videos seems well, tv too (no guide frezze and zapps)
and again tried a bit 3d.
on the first run the tv detection and res. switch seem proper and fast -3d was displayed correctly. with second and some more tries, somehow i wasn't able to get 3d again -mad stats was 3d but the tv refuse to switch -except once with stop it was switched correctly just before the tv resets the resolution back to 50p and general i always have a additional tv 3d detection with stopping
just glad that the control again works

 

[Sebastiii]

Thanks
I will put link for V260 based on it, i didn't really reproduce it but the minimode i can see that it try to resize to 0X0 so it lead to no change, i need to know why lol

So about TVHome :


And about the queue :
Fullscreen :


Reduce (Alt+enter) :

 

[Sebastiii]

V260 link -> added in first post.

 

[joecrow]

Anything in v260 to fix my screensaver problem? Also am I the only one seeing it?
BTW after re-installing v259 yesterday the screensaver was also being actioned in OLV. Can't figure it out, what did you change that is causing this v246-259? I currently have screensaver disabled but basically I need it for when I play music!

 

[daWooky]

hi joe,
i forget ya using the windows sc-saver. i only tried the mepo screen idle blank yesterday, that was working.
damn m8

 

[Sebastiii]

Anything in v260 to fix my screensaver problem? Also am I the only one seeing it?
BTW after re-installing v259 yesterday the screensaver was also being actioned in OLV. Can't figure it out, what did you change that is causing this v246-259? I currently have screensaver disabled but basically I need it for when I play music!

No change on this side yet, was going to bed earlier to wake up earlier to for work
So i need to compare the change but first i need to reproduce it lol
V260 is based on fixing displaying Video Overlay or Video in different part of skin (like EVR) it should be better to avoid for example the no display of video.
I was able to reproduce the no reduce video when we are in minimode, but can't figure out why !!!

For sure, the screensaver issue must be related to something, i bet it comes from c++ side but need to test that

 

[joecrow]

hi joe,
i forget ya using the windows sc-saver. i only tried the mepo screen idle blank yesterday, that was working.
damn m8

The MP screensaver is working OK for me also. Blank screen is a bit boring though, where did all the visualisations go?

 

[Sebastiii]

I just did a quick test on V260 :

[2016-11-29 19:04:05,730] [Log    ] [MPMain   ] [DEBUG] - g_player VideoWindowChanged() SendThreadMessage received
[2016-11-29 19:04:50,808] [Log    ] [MPMain   ] [INFO ] - Main: WM_POWERBROADCAST (PBT_POWERSETTINGCHANGE)
[2016-11-29 19:04:50,809] [Log    ] [MPMain   ] [INFO ] - Main: The display is dimmed
[2016-11-29 19:04:50,809] [Log    ] [MPMain   ] [WARN ] - TVHome.WndProc() : msg PBT_POWERSETTINGCHANGE
[2016-11-29 19:04:50,810] [Log    ] [MPMain   ] [DEBUG] - TVHome.WndProc() : msg msg=0x218 (WM_POWERBROADCAST) hwnd=0xed19ea wparam=0x8013 lparam=0x40a972b8 result=0x0
[2016-11-29 19:05:00,790] [Log    ] [MPMain   ] [DEBUG] - Main: WM_SYSCOMMAND (SC_MONITORPOWER)
[2016-11-29 19:05:00,791] [Log    ] [MPMain   ] [DEBUG] - Main: SC_MONITORPOWER OFF
[2016-11-29 19:05:00,792] [Log    ] [MPMain   ] [INFO ] - Main: Active player - resetting idle timer for display to be turned off
[2016-11-29 19:05:00,815] [Log    ] [MPMain   ] [INFO ] - Main: WM_POWERBROADCAST (PBT_POWERSETTINGCHANGE)
[2016-11-29 19:05:00,816] [Log    ] [MPMain   ] [INFO ] - Main: The display is on
[2016-11-29 19:05:00,816] [Log    ] [MPMain   ] [DEBUG] - D3D: Cursor ShowMouseCursor state -1
[2016-11-29 19:05:00,816] [Log    ] [MPMain   ] [WARN ] - TVHome.WndProc() : msg PBT_POWERSETTINGCHANGE
[2016-11-29 19:05:00,817] [Log    ] [MPMain   ] [DEBUG] - TVHome.WndProc() : msg msg=0x218 (WM_POWERBROADCAST) hwnd=0xed19ea wparam=0x8013 lparam=0x408ee8d8 result=0x0
[2016-11-29 19:05:45,646] [Log    ] [MPMain   ] [INFO ] - Main: WM_POWERBROADCAST (PBT_POWERSETTINGCHANGE)
[2016-11-29 19:05:45,648] [Log    ] [MPMain   ] [INFO ] - Main: The display is dimmed
[2016-11-29 19:05:45,649] [Log    ] [MPMain   ] [WARN ] - TVHome.WndProc() : msg PBT_POWERSETTINGCHANGE
[2016-11-29 19:05:45,649] [Log    ] [MPMain   ] [DEBUG] - TVHome.WndProc() : msg msg=0x218 (WM_POWERBROADCAST) hwnd=0xed19ea wparam=0x8013 lparam=0x12442fb8 result=0x0
[2016-11-29 19:05:55,630] [Log    ] [MPMain   ] [DEBUG] - Main: WM_SYSCOMMAND (SC_MONITORPOWER)
[2016-11-29 19:05:55,631] [Log    ] [MPMain   ] [DEBUG] - Main: SC_MONITORPOWER OFF
[2016-11-29 19:05:55,631] [Log    ] [MPMain   ] [INFO ] - Main: Active player - resetting idle timer for display to be turned off
[2016-11-29 19:05:55,652] [Log    ] [MPMain   ] [INFO ] - Main: WM_POWERBROADCAST (PBT_POWERSETTINGCHANGE)
[2016-11-29 19:05:55,652] [Log    ] [MPMain   ] [INFO ] - Main: The display is on
[2016-11-29 19:05:55,653] [Log    ] [MPMain   ] [DEBUG] - D3D: Cursor ShowMouseCursor state -1
[2016-11-29 19:05:55,653] [Log    ] [MPMain   ] [WARN ] - TVHome.WndProc() : msg PBT_POWERSETTINGCHANGE
[2016-11-29 19:05:55,653] [Log    ] [MPMain   ] [DEBUG] - TVHome.WndProc() : msg msg=0x218 (WM_POWERBROADCAST) hwnd=0xed19ea wparam=0x8013 lparam=0x40a97218 result=0x0

I have set 1 minutes of timeout in windows monitor screensaver and i can see : (around all minutes)
-> Main: Active player - resetting idle timer for display to be turned off

So it seems working ok ?
How did you trigger the issue and do you know the last version working ?
Thanks @joecrow