[WiP] madVR support in MP1 (39 Viewers)

[kenwonders]

Tick tock tick tock

I'm doing well on 388 and MP v448, everything working great (including a lot of old demoscene stuff I tried )

 

[Sebastiii]

V450 updated on first post, not much change for madVR side but more about FCU fix (trying to workaround it without the flickering)
Need feedback
Looks good based on @RobNorthcott reply

 

[rohnfe]

Hi guys,
new madvr is out ... there seem to be a lot of changes:

madVR v0.92.11

* added 2 new lower "remove compression artifacts" strengths
* slightly improved "remove compression artifacts" quality at lower strengths
* "remove compression artifacts" now always runs as part of NGU (if possible)
* display bitdepth now defaults to new "auto" setting (read from EDID)
* extended "if there are big black bars, reduce bar size" option range
* render target display is now shown in bold in the settings dialog
* added support for "execute command line on profile switch"
* when OS "HDR and Advanced Color" switch is active, FSE mode is disabled
* removed "exclusive" / "windowed" mode OSD notification
* added "(OS HDR)" vs "(NV HDR)" vs "(AMD HDR)" OSD information
* added downscaling "LL" (Linear Light) information to OSD
* added keyboard shortcut for opening settings dialog (default Ctrl+S)
* added keyboard shortcut for toggling seekbar on/off
* added keyboard shortcut for showing seekbar for 5 seconds
* added keyboard shortcut for toggling debanding on/off vs strength
* added file tag "detectBlackBars=on|off" or "blackBarDetection=on|off"
* added file tag "hdr=on|off" or "transfer=hdr|sdr|2084|709"
* added "battery" profile variable
* added "fullscreen" profile variable, can be exclusive or windowed
* renamed "fseMode" profile variable to "exclusive" ("fseMode" still works)
* fixed: "display" profile variable didn't work properly
* fixed: little "let madVR decide" chroma quadrupling bug
* fixed: screenshots were distorted when using "crop black bars"
* fixed: screenshots in paused state sometimes crashed madVR
* fixed #320: make seeking to start of movie easier with FSE mode seek bar
* fixed #336: madHcCtrl: 3DLUT file path is evaluated for remote instance
* fixed #406: typing in "devices" profiles could jump to other pages
* fixed #481: distorted colors with Y416 input and DXVA processing
* added workaround for subtitle renderer crashes (XySubFilter, AssFilterMod)
* added workaround for PotPlayer OSD render crashes

 

[daWooky]

yep all new since a week or so. madvr, lav nightly and even a new xysubs
madVR - high quality video renderer (GPU assisted) - Page 2423 - Doom9's Forum

Spoiler

Anybody interested in an XySubFilter bugfix for external SRT subtitles with italic text in them?

http://madshi.net/XySubFilter746SrtFix.zip

This is not tested well, and it's a totally unofficial build, so please use on your own risk. If you do decide to give it a try, let me know if the "move subtitles" option now works properly in all situations.

I've asked cyberbeing to create a new official XySubFilter build with my fix, but it'd be great if some users would test it first.

 

[microfast]

V450 updated on first post, not much change for madVR side but more about FCU fix (trying to workaround it without the flickering)
Need feedback
Looks good based on @RobNorthcott reply

I Seb, I have tested the V448 and this one for me works really well ( a part sometime a very little flicker in the skin ) and a lot better than the official 1.19 prerelease ...

I have seen even a little improvment in the BDJ's compartment: now you have the time for choice if resume or not the playing of a film starting it in the bdj's menù, however I do continue to find better the older original "Alien-fix" libbluray respect of the new one done by Azzurro ( replacing the two libbluray files with the olds one) like described by me in the BDJ specific thread; I must find a manner for upload a reduced but 100% functional Alien ISO so that you and Azzurro can see and understand the problems.

Now I will try the V450 too ...

Marco

 

[Sebastiii]

Hi Marco
Yep the fix is the same from @mm1352000 and @azzuro but now the libbluray is up to date against latest official source and surely there is new bug or it's because we need to adapt code but that point will be not easy because the owner dev that work on the libbluray is retired.

Still try to supply logs in BDJ specific thread with bddebug.log too

 

[joecrow]

With v450 the blackscreen problem with videos in TVS has returned, looks much the same as before with DXVA2 Copyback. Plays OK with EVR and with DXVA2 Native (with stutter), also found that toggling from fullscreen to windowed will show video but toggling back causes an instant restart of MP (Same with EVR) not just TVS but live TV and Videos etc.
I have updated Madvr to latest LAV to 0.70.2 and AM vid. drivers to latest but no change. I will have a play with the Madvr settings but need any help you can give me.
Logs attached *EVR* just shows the TVS vids playing OK with EVR, Madvr1 shows TVS not playing and Madvr2 shows TVS vids playing after fullscreen toggle to windowed the MP restarting after toggle back.

 

[Sebastiii]

Weird, i can't reproduce it with your sample, will analyse logs

 

[Sebastiii]

The restart is caused because when catching exception, i have add a code to restart MP

[2018-01-22 16:15:57,526] [Error  ] [MPMain   ] [ERROR] - D3D: RecreateSwapChain exception : Error in the application.
-2147467259 (E_FAIL)
   at Microsoft.DirectX.Direct3D.Device.Reset(PresentParameters[] presentationParameters)
   at MediaPortal.D3D.RecreateSwapChain(Boolean useBackup)

It can't handle 'Microsoft.DirectX.Direct3D.Device.Reset(PresentParameters.....)' no sure why (Device not ready or what ever).

Trying to look what can be done lol

 

[daWooky]

short try with v450 on fcu test rig damn tv blackout on stop returned too


addit: with drr_v1 in the game, it seems working again
Win10 falls creators update problems watching videos