My tv: level/volume offset for individual channels/cards (1 Viewer)

knutinh

Portal Pro
September 4, 2005
558
2
My analog tv-card (Saphire theatrix) is quite a bit louder than my digital one (terratec T2). Scary when I switch channels :)

-k
 

laeb66

Portal Pro
March 20, 2005
136
0
Sweden
This it´s a god application and useful...
Just use one card but it´s big diffrent on the soundfeeds on the terrestial broadcasting in my area.
Maybe have the choise to select prefered stream on each channel..
 

laeb66

Portal Pro
March 20, 2005
136
0
Sweden
I find out that is possible to edit default wave value for each card in regedt32...

You can try that out.. could be your solution..

Cheers
 

qawaali

Portal Member
July 15, 2005
21
0
54
Sydney
Home Country
Sorry to bump this thread but I have the same problem and would like to know if anyone has a solution for balancing the volume levels between an analogue and digital card.

I know from older MP versions we used to have the level slider for each TV cards configuration but this has never worked for the digital card for me and I think (at work now) that it's been removed?

Is this functionality down to the card drivers or is it something MP can address?

Thanks in advance
 

Tech Geek

Portal Pro
January 29, 2006
354
0
Denver, CO USA
Actually, it would be nice to assign a volume modifier for each channel as some are quieter or louder than others. Then add an option to the setup to assign the same modifier to all channels on a card. I'd rather not have it record with altered volume though... just adjust the volume up or down for the channel depending on the volume modifier.
 

Users who are viewing this thread


Write your reply...

Similar threads

Perhaps... Only way to confirm would be for me to invest in a different USB DVB-S2 tuner (like the Hauppauge WinTV-NOVA-S2), which I might do if the issue persists.
Perhaps... Only way to confirm would be for me to invest in a different USB DVB-S2 tuner (like the Hauppauge WinTV-NOVA-S2), which...
I have a dedicated TV Server x64 v1.36 running on Windows 11, with a Hauppauge WinTV-dualHD tuner for DVB-T channels (Freeview) and...
Replies
8
Views
663
Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings, advanced options, I switched to UNC paths instead of the default RSS, and it's working very well. Sure I had to figure out the paths, but no big deal. Maybe helpful for someone in the future. Thanks for the...
Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings...
Hi folks. I have an issue with a new install/integration into my mediaportal system. I have a “mediaportal server” which has the TV...
Replies
5
Views
892
MP1 MP2 1.34 STB blasting for IPTV DE
I'm downsizing my big honkin' HTPC case to a mini PC, which means the tried and true Hauppauge Colossus card that bridges the set top box into Mediaportal needs replaced with a different solution. I currently have HDMI from the STB to the colossus. Mediaportal is controlling the STB through a USBUIRT blaster and the blaster is...
I'm downsizing my big honkin' HTPC case to a mini PC, which means the tried and true Hauppauge Colossus card that bridges the set...
I'm downsizing my big honkin' HTPC case to a mini PC, which means the tried and true Hauppauge Colossus card that bridges the set...
Replies
0
Views
905
Many thanks for the answer. So far I've used Logitech's Harmony hub. This allows you to control all components (including the media portal). I have now contacted the Sofabaton hotline. It should also work here like with the Harmony. Unfortunately, not all of the IR codes are correct. You can also learn commands here. But that doesn't...
Many thanks for the answer. So far I've used Logitech's Harmony hub. This allows you to control all components (including the...
I don't have a complicated A/V system - a Sony A8H TV, Yamaha receiver, and a HTPC on which I run most media through MediaPortal. I...
Replies
8
Views
3K
Hi, it looks like the Client's server connection settings got corrupted somehow and were reset, hopefully this is an easy fix. Open MP2-Client, navigate to Settings->General->Connectivity->Home server. In the menu on the left there may be an option Detach from home server, if there is click it and acknowledge the dialog that pops up...
Hi, it looks like the Client's server connection settings got corrupted somehow and were reset, hopefully this is an easy fix...
Help Please: MP doesnt display any of my previouse recordings or TV programs It seems like the Server isnt running? MP was working...
Replies
3
Views
918
Top Bottom