Mystiqu satix Dual S2 unkonwn Type (1 Viewer)
- Thread starter Wurlitzer
- Start date
O
OL_1973
Guest
AW: Mystiqu satix Dual S2 unkonwn Type
Hello Wurlitzer,
have you check if the tv card is active in your system? Meanwhile the card is deactivated and after resume (from standby) it`s not been activated. At this point for Mediaportal the tv card is "unknown".
Hello Wurlitzer,
have you check if the tv card is active in your system? Meanwhile the card is deactivated and after resume (from standby) it`s not been activated. At this point for Mediaportal the tv card is "unknown".
- Thread starter
- #3
AW: Mystiqu satix Dual S2 unkonwn Type
Hi,
thx for your reply.
I don't use standby. I have a dedicated server for my mp installation.
I have two dual cards, mystiqu satix s2 dual and one cine s2. Only the mystique is as unkown. No i removed the card, restartet the computer, but the card is gone.
Andy iedeas?
THX
Wurlitzer
Hi,
thx for your reply.
I don't use standby. I have a dedicated server for my mp installation.
I have two dual cards, mystiqu satix s2 dual and one cine s2. Only the mystique is as unkown. No i removed the card, restartet the computer, but the card is gone.
Andy iedeas?
THX
Wurlitzer
- September 1, 2008
- 21,544
- 8,236
- Home Country
-
New Zealand
Hi Wurlitzer
Check the documentation in the wiki -->here<-- - it explains what "unknown" means under "tuners" -> "type". The SaTiX and Cine are very similar (if not identical). It is possible that the drivers have a conflict. Please install the tuner again and reinstall the drivers. After that restart the computer and check the status again. Also check the tuner status in device manager under "sound, video and game controllers" (check that the tuner is listed and that it does not have a yellow exclamation mark).
mm
Check the documentation in the wiki -->here<-- - it explains what "unknown" means under "tuners" -> "type". The SaTiX and Cine are very similar (if not identical). It is possible that the drivers have a conflict. Please install the tuner again and reinstall the drivers. After that restart the computer and check the status again. Also check the tuner status in device manager under "sound, video and game controllers" (check that the tuner is listed and that it does not have a yellow exclamation mark).
mm
Users who are viewing this thread
Similar threads
Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download page, there was an additional item called "TBS6281se V2 Change Mode Tool". There was zero documentation to accompany this. I downloaded it and ran it. It is a tool to detect the current run state of both...
Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download...
My previous TBS PCI-E card failed, so I bought another one. The model I chose is the TBS 6181-SE, which can be seen on Amazon here...
MP1
MP2
1.38
Running TVService as "NT Service\TVService" or "Local Service" not working anymore since Windows September 2025 updates
DE
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
I used to run the TVService under the "NT Service\TVService" account to follow least privileges principal (not exposing my whole...
two simultaneous recordings succeeded. All good!
two simultaneous recordings succeeded. All good!
Since upgrading from 1.36 to 1.38, MP1 no longer connects to my tuners. They no longer appear under the server in the left-hand...
Fixed, I think.
Certainly the vintage MP2 installer that I was using no longer installs the LAV filters. I can only assume that these were never part of the install package itself, but rather downloaded during the install, and that link no longer exists. Shame that the installer doesn't indicate this.
Last time when I installed the...
Fixed, I think.
Certainly the vintage MP2 installer that I was using no longer installs the LAV filters. I can only assume that...
Hi all,
I've recently retired my MP2 setup for my main HTPC and gone back to separates, but I wanted to retain the ability to play...
4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0 on Windows 7 SP1
4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0...
My TV PC is more a cast-off on older hardware (a 'Quiet PC' i5 4690, 16GB ram, 2xSSD 1xHDD, system graphics), mainly as a cheap way...
