Completed PCi card in pundit-r (1 Viewer)
- Thread starter lout
- Start date
M
martynah
Guest
Not true 
my pundit R has a NOVA-T PCI Card in the bottom pci slot - its the older of the PCI card models, and it does fit, you just have to insert the card into the riser module when you've removed it, and then bend the chassis of the pundit out the way while you slide it back in.
Mart.
my pundit R has a NOVA-T PCI Card in the bottom pci slot - its the older of the PCI card models, and it does fit, you just have to insert the card into the riser module when you've removed it, and then bend the chassis of the pundit out the way while you slide it back in.Mart.
L
larsh
Guest
I've got a PVR-350 fitted in.. No temperature problems or whatever.... :?
My old HTPC was and Asus Pundit - I had twin full size nova T's in there. Like martynah reccomended you have to remove the riser completely and use the bottom slot. With a bit of wiggling and bending it will fit. I got another one in the top slot as well but I had to remove the card mounting plate and the PCI cradle needed major sugery with the hacksaw and pliers!
Just be brave and good luck
Just be brave and good luck
My HTPC is also an ASUS Pundit-r, (which is a very nice looking case!) and I managed to fit an Hauppauge PVR 500 into it with bending the bottom of the case outwards a bit and removing the "funnel" from the fan. My next plan is to exchange the fan that came with the case for a nice papst fan in order to huch the machine up a bit.
Users who are viewing this thread
Similar threads
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network.
Hauppauge card retired long ago. I have also retired very early SD units, the Quatros seem to work much better than the older units.
Go to SD's support website and download and install the windows...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network...
I am currently using a Hauppauge WinTV QuadHD PCIe card on MP1 (1.37) for DVB-T, but 2 of the tuners have died. Thinking about...
Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download page, there was an additional item called "TBS6281se V2 Change Mode Tool". There was zero documentation to accompany this. I downloaded it and ran it. It is a tool to detect the current run state of both...
Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download...
My previous TBS PCI-E card failed, so I bought another one. The model I chose is the TBS 6181-SE, which can be seen on Amazon here...
I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ?
MP(1) will only use LAV if you select "Internal DirectShow player" as music output, but then you lose gapless playback.
If you you don't have multichannel music you can choose WASAPI as the output and set the number of speakers to stereo.
I have...
I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ?
MP(1) will only use LAV if you select...
Not sure if this a a bug/config/settings problem.
I am running a media portal 2.5 server with 2.41 client but it seems I get the...
thanks for the information!
thanks for the information!
I watched a recorded program, (that I thought I'd allready watched previously)
After watching it (for the second time) I tried to...
It's getting weirder.....
If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the stations but if I rescan it on the same card it just keeps updating the 1 channel. My brain is melting.........
It's getting weirder.....
If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the...
Having great fun with this still. I have a fairly good PC setup, Ryzen 5 8500g, Msi Pro 650M-P with 32GB of RAM with a TBS 6281 and...