PowerScheduler++ 1.4.0.x - Stable versions for MediaPortal 1.4 (5 Viewers)

D3ltoroxp

MP Donator
  • Premium Supporter
  • June 1, 2008
    3,308
    205
    Home Country
    Germany Germany
    Hello Guys, i don't know it's a faild setting or a bug or something else but i have a problem with Standby S3. For example, when i wakeup my htpc with the remote all works fine, my htpc goes after 5 min to standby. When my htpc is waked up from the tv server for a record enters my HTPC the StandBy but only sometime not after 5 minutes. So my example you can see i attached. The movie was done at 0:58 so MP should go to StandBy latest on 01:03 - 01:05 but he goes to standby at 02:40. What can i do that he go to the stand by after this 5 mins when the tvserver wake up my system and make an record.

    Ebene Datum und Uhrzeit Quelle Ereignis-ID Aufgabenkategorie
    Informationen 29.01.2013 02:42:30 Service Control Manager 7036 Keine "Dienst ""TCP/IP-NetBIOS-Hilfsdienst"" befindet sich jetzt im Status ""Beendet""."
    Informationen 29.01.2013 02:42:30 Service Control Manager 7042 Keine "Der Steuerbefehl ""beenden"" wurde erfolgreich an den Dienst ""TCP/IP-NetBIOS-Hilfsdienst"" gesendet.

    Angegebene Ursache: 0x40030011 [Betriebssystem: Netzwerkkonnektivität (Geplant)]

    Kommentar: Kein"
    Informationen 29.01.2013 02:42:30 Microsoft-Windows-Kernel-Power 42 (64) "Das System wird in den Standbymodus versetzt.

    Grund: Anwendungs-API"
    Informationen 29.01.2013 02:42:00 Service Control Manager 7036 Keine "Dienst ""Adobe Flash Player Update Service"" befindet sich jetzt im Status ""Beendet""."
    Informationen 29.01.2013 02:42:00 Service Control Manager 7036 Keine "Dienst ""Adobe Flash Player Update Service"" befindet sich jetzt im Status ""Ausgeführt""."
    Informationen 29.01.2013 02:42:00 Service Control Manager 7036 Keine "Dienst ""Adobe Flash Player Update Service"" befindet sich jetzt im Status ""Beendet""."
    Informationen 29.01.2013 02:42:00 Service Control Manager 7036 Keine "Dienst ""Adobe Flash Player Update Service"" befindet sich jetzt im Status ""Ausgeführt""."
    Informationen 29.01.2013 01:42:00 Service Control Manager 7036 Keine "Dienst ""Adobe Flash Player Update Service"" befindet sich jetzt im Status ""Beendet""."
    Informationen 29.01.2013 01:42:00 Service Control Manager 7036 Keine "Dienst ""Adobe Flash Player Update Service"" befindet sich jetzt im Status ""Ausgeführt""."
    Informationen 29.01.2013 01:42:00 Service Control Manager 7036 Keine "Dienst ""Adobe Flash Player Update Service"" befindet sich jetzt im Status ""Beendet""."
    Informationen 29.01.2013 01:42:00 Service Control Manager 7036 Keine "Dienst ""Adobe Flash Player Update Service"" befindet sich jetzt im Status ""Ausgeführt""."
    Informationen 29.01.2013 00:42:00 Service Control Manager 7036 Keine "Dienst ""Adobe Flash Player Update Service"" befindet sich jetzt im Status ""Beendet""."
    Informationen 29.01.2013 00:42:00 Service Control Manager 7036 Keine "Dienst ""Adobe Flash Player Update Service"" befindet sich jetzt im Status ""Ausgeführt""."
    Informationen 29.01.2013 00:37:18 Service Control Manager 7036 Keine "Dienst ""Anwendungserfahrung"" befindet sich jetzt im Status ""Beendet""."
    Informationen 29.01.2013 00:27:18 Service Control Manager 7036 Keine "Dienst ""Anwendungserfahrung"" befindet sich jetzt im Status ""Ausgeführt""."
    Informationen 29.01.2013 00:27:17 Service Control Manager 7036 Keine "Dienst ""Erkennung interaktiver Dienste"" befindet sich jetzt im Status ""Ausgeführt""."
    Informationen 28.01.2013 23:42:00 Service Control Manager 7036 Keine "Dienst ""Adobe Flash Player Update Service"" befindet sich jetzt im Status ""Beendet""."
    Informationen 28.01.2013 23:42:00 Service Control Manager 7036 Keine "Dienst ""Adobe Flash Player Update Service"" befindet sich jetzt im Status ""Ausgeführt""."
    Informationen 28.01.2013 23:12:23 Service Control Manager 7036 Keine "Dienst ""TCP/IP-NetBIOS-Hilfsdienst"" befindet sich jetzt im Status ""Ausgeführt""."
    Informationen 28.01.2013 23:12:21 Service Control Manager 7036 Keine "Dienst ""Adobe Flash Player Update Service"" befindet sich jetzt im Status ""Beendet""."
    Informationen 28.01.2013 23:12:21 Service Control Manager 7036 Keine "Dienst ""Adobe Flash Player Update Service"" befindet sich jetzt im Status ""Ausgeführt""."
    Informationen 28.01.2013 23:12:20 Microsoft-Windows-Power-Troubleshooter 1 Keine "Das System wurde aus dem Energiesparmodus reaktiviert.

    Zeit im Energiesparmodus: ‎2013‎-‎01‎-‎28T21:09:37.891816200Z
    Reaktivierungszeit: ‎2013‎-‎01‎-‎28T22:12:20.809074900Z

    Reaktivierungsquelle: Zeitgeber - TvService.exe"
    Informationen 28.01.2013 23:12:19 Microsoft-Windows-Kernel-General 1 Keine Die Systemzeit wurde von ‎2013‎-‎01‎-‎28T21:09:43.300125500Z auf ‎2013‎-‎01‎-‎28T22:12:19.500000000Z geändert.

    EDIT:: Hm when i start my htpc the same problem, don't know why he don't go to standby... Here are my settings an the log from tool MCE StandBy Tool

    EDIT 2:: With S4 Hibernate, all works fine, when i start the htpc oder a record start the pc, after 5 min of idle he goes to S4... But S4 makes other problems, because i will go to S3
     

    Attachments

    • set 2.PNG
      set 2.PNG
      13.9 KB
    • set 3.PNG
      set 3.PNG
      16.7 KB
    • set 4.PNG
      set 4.PNG
      13.8 KB
    • set.PNG
      set.PNG
      39.8 KB
    • win.PNG
      win.PNG
      13.2 KB
    Last edited:

    DragonQ

    Portal Pro
    August 30, 2011
    644
    79
    Home Country
    United Kingdom United Kingdom
    Under what specific circumstances does the "executable upon power change" run? I made a small program to unmute the master volume because sometimes the HTPC is muted when woken up. However, it happened again this morning despite PS++ set to run my (tested working) exe. :(

    EDIT: Looking at the logs, the system went to sleep at 01:21:08 and then woke up again at 01:22:05 (Event Viewer says reason is "unknown"). Then, MediaPortal tuned to BBC One HD (channel 1) and was left playing that (despite the TV being off) for the rest of the morning. PS++ kept reporting that "media playing" was preventing standby.

    I bet these two problems are linked - if the unmute program gets run whilst the TV is off, then it's going to be unmuting the main system volume. Then, when the TV is actually turned on, the default sound device changes to the TV (HDMI), which is for some reason muted. But why the hell is the HTPC waking up and playing media for no reason??
     
    Last edited:

    michael_t

    Portal Pro
    November 30, 2008
    1,258
    813
    Home Country
    Germany Germany
    ...When my htpc is waked up from the tv server for a record enters my HTPC the StandBy but only sometime not after 5 minutes. So my example you can see i attached. The movie was done at 0:58 so MP should go to StandBy latest on 01:03 - 01:05 but he goes to standby at 02:40. What can i do that he go to the stand by after this 5 mins when the tvserver wake up my system and make an record.
    After the recording was done at 00:58 your HTPC began to grab EPG data which prevented standby until it ended at 2:40. 2 minutes later your system suspended. So everything is working as it should...

    Michael
     

    michael_t

    Portal Pro
    November 30, 2008
    1,258
    813
    Home Country
    Germany Germany
    Under what specific circumstances does the "executable upon power change" run? I made a small program to unmute the master volume because sometimes the HTPC is muted when woken up. However, it happened again this morning despite PS++ set to run my (tested working) exe. :(
    It depends if you run the comand from the server plugin or from the client plugin. In both cases the command is run on "resume" and "suspend" events, on the client it is also run on entering away mode and leaving away mode.
    EDIT: Looking at the logs, the system went to sleep at 01:21:08 and then woke up again at 01:22:05 (Event Viewer says reason is "unknown"). Then, MediaPortal tuned to BBC One HD (channel 1) and was left playing that (despite the TV being off) for the rest of the morning. PS++ kept reporting that "media playing" was preventing standby.

    I bet these two problems are linked - if the unmute program gets run whilst the TV is off, then it's going to be unmuting the main system volume. Then, when the TV is actually turned on, the default sound device changes to the TV (HDMI), which is for some reason muted. But why the hell is the HTPC waking up and playing media for no reason??
    Please send me logs of the situation, otherwise I will not be able to help you.

    Michael
     

    DragonQ

    Portal Pro
    August 30, 2011
    644
    79
    Home Country
    United Kingdom United Kingdom
    It depends if you run the comand from the server plugin or from the client plugin. In both cases the command is run on "resume" and "suspend" events, on the client it is also run on entering away mode and leaving away mode.
    Hmm I'd forgotten about the client plugin. I'm using the server plugin. However, I notice that "Unmute master volume on start and on leaving away mode" is ticked in the client plugin. That option is not working for me, it seems. :(

    Please send me logs of the situation, otherwise I will not be able to help you.

    Michael
    Attached! It sleeps at 2013-01-30 01:22:08 and resumes at 2013-01-30 01:23:05.
     
    Last edited:

    michael_t

    Portal Pro
    November 30, 2008
    1,258
    813
    Home Country
    Germany Germany
    ...However, I notice that "Unmute master volume on start and on leaving away mode" is ticked in the client plugin. That option is not working for me, it seems. :(
    Volume is only unmuted on leaving away mode not on wakeup from S3/S4.

    Michael
     

    Huzz456

    Portal Member
    January 20, 2013
    6
    0
    42
    Home Country
    United Kingdom United Kingdom
    I use win8. All works fine for me. Just the team is not ready to support win8. 1.4 will most probably (unlessmsomeone finds a show stopper) support win8 officially

    How do i install it? It wont let me because im on windows 8?
     

    mbuzina

    Retired Team Member
  • Premium Supporter
  • April 11, 2005
    2,839
    726
    Germany
    Home Country
    Germany Germany
    ? I have no Problem what so ever. How is your current Setup & what are you installing (from where, might be some different Versions around)
     

    erichzann

    MP Donator
  • Premium Supporter
  • October 25, 2011
    244
    34
    Oxford
    Home Country
    United Kingdom United Kingdom
    Hi,

    One issue I have with the current power scheduler plugin is that when one client is active but not watching TV the TV Server PC will not sleep.

    What I want is for the TV Server to stay awake if a client is watching tv, recordings etc. but otherwise sleep.

    Would PS++ be able to do this?

    Thanks
     

    michael_t

    Portal Pro
    November 30, 2008
    1,258
    813
    Home Country
    Germany Germany
    Hi,

    One issue I have with the current power scheduler plugin is that when one client is active but not watching TV the TV Server PC will not sleep.

    What I want is for the TV Server to stay awake if a client is watching tv, recordings etc. but otherwise sleep.

    Would PS++ be able to do this?

    Thanks
    No, PS++ makes the tv server stay alive as long as a remote client is active (i.e. the MP client with the PS++ client plugin is running).

    Michael
     

    Users who are viewing this thread

    Top Bottom