Germany
- Thread starter
- Moderator
- #3,341
Will check 
PureVisionHD 1080 (2 Viewers)
- Thread starter catavolt
- Start date
- Moderator
- #3,342
To be a bit more specific, the overlap is between TV logo and day of the datetime.
I suppose no need to create a colored rectangle.
I suppose no need to create a colored rectangle.
- Thread starter
- Moderator
- #3,343
@framug Yup, made this change to not have the date at the right of the list - but unfortunately this control is hardcoded aligned "right", so I trtied to align it nicely under the program title, and with German language this works fine. As you are on French and this text is longer than in German, the text overlaps to the left.
Maybe you can help us and change the code?
The respective property of listcontrol ID 10 or 11 is "text2" with the possible values "textXOff2", "textYOff2" and "textalign2".
As the "text2" property is hardcoded aligned right, I even cannot re-align it with "<textalign2>left</textalign2>".
Maybe you can have a look on the code and remove the hardcoded right alignment?
Maybe you can help us and change the code?
The respective property of listcontrol ID 10 or 11 is "text2" with the possible values "textXOff2", "textYOff2" and "textalign2".
As the "text2" property is hardcoded aligned right, I even cannot re-align it with "<textalign2>left</textalign2>".
Maybe you can have a look on the code and remove the hardcoded right alignment?
- Moderator
- #3,344
hmm.. didn't see an hardcoded right align there (but a very fast check).
I have no many free time, for the moment.
If it can help a bit more, I have seen a "KabelBold" font problem in log :
I have no many free time, for the moment.
If it can help a bit more, I have seen a "KabelBold" font problem in log :
Code:
[2022-07-13 10:46:47,611] [Log ] [MPMain ] [WARN ] - GUIFontManager: Font with the name 'KabelBold' does not exist
[2022-07-13 10:46:47,611] [Log ] [MPMain ] [WARN ] - GUIFontManager: Font with the name 'KabelBold' does not exist
[2022-07-13 10:46:47,611] [Log ] [MPMain ] [DEBUG] - Cacheing expression: #(iif(eq(#TV.Scheduled.Genre,''),'','#scroll.wrap #TV.Scheduled.Genre #scroll.wrap'))
[2022-07-13 10:46:47,611] [Log ] [MPMain ] [DEBUG] - Cacheing expression: eq(#TV.Scheduled.Genre,'')
[2022-07-13 10:46:47,611] [Log ] [MPMain ] [DEBUG] - Cacheing expression: #TV.Scheduled.Genre
[2022-07-13 10:46:47,616] [Log ] [MPMain ] [DEBUG] - Cacheing expression: '#scroll.wrap #TV.Scheduled.Genre #scroll.wrap'
[2022-07-13 10:46:47,741] [Log ] [MPMain ] [INFO ] - TexturePacker: Loaded D:\NUC11\Documents\Team MediaPortal\MediaPortal\Cache\PureVisionHD 1080\packedgfx211.png texture:2048x2048 miplevels:1
[2022-07-13 10:46:47,741] [Log ] [MPMain ] [INFO ] - TexturePacker: fontengine add texure:1194
[2022-07-13 10:46:47,821] [Log ] [MPMain ] [WARN ] - GUIFontManager: Font with the name 'KabelBold' does not exist
[2022-07-13 10:46:47,821] [Log ] [MPMain ] [DEBUG] - Window: TvPlugin.TVProgramInfo init
[2022-07-13 10:46:50,244] [Log ] [MPMain ] [DEBUG] - TVProgammInfo.OnRecordProgram - programm = Petits secrets entre...(ID:661990) on 6 13/07/2022 11:50:00 - 13/07/2022 12:20:00
[2022-07-13 10:46:50,254] [Log ] [MPMain ] [DEBUG] - TVProgramInfo.CreateProgram: program = Petits secrets entre...(ID:661990) on 6 13/07/2022 11:50:00 - 13/07/2022 12:20:00
[2022-07-13 10:46:50,254] [Log ] [MPMain ] [DEBUG] - TVProgramInfo.CreateProgram - no series schedule
[2022-07-13 10:46:50,254] [Log ] [MPMain ] [INFO ] - GetConflictingSchedules: Schedule = Petits secrets entre... on 6 13/07/2022 11:50:00 - 13/07/2022 12:20:00 ID=0
[2022-07-13 10:46:50,259] [Log ] [MPMain ] [INFO ] - GetConflictingSchedules: Cards.Count = 2
[2022-07-13 10:46:50,269] [Log ] [MPMain ] [INFO ] - AssignSchedulesToCard: schedule = Petits secrets entre... on 6 13/07/2022 11:50:00 - 13/07/2022 12:20:00 ID=0
[2022-07-13 10:46:50,309] [Log ] [MPMain ] [INFO ] - AssignSchedulesToCard: free on card 0, ID = 3
[2022-07-13 10:46:50,309] [Log ] [MPMain ] [DEBUG] - TVProgramInfo.CreateProgram - conflicts.Count = 0 - notViewable.Count = 0
[2022-07-13 10:46:50,309] [Log ] [MPMain ] [DEBUG] - TVProgramInfo.CreateProgram - create schedule = Petits secrets entre... on 6 13/07/2022 11:50:00 - 13/07/2022 12:20:00 ID=0
[2022-07-13 10:46:50,324] [Log ] [MPMain ] [INFO ] - RemoteControl - Connected- Thread starter
- Moderator
- #3,345
THX, will check the KabelBold which should be LabelBold - a typical typo Yup, fixed
Attached corrected file:
Yup, fixed Attached corrected file:
- Thread starter
- Moderator
- #3,346
Hello folks,
because I found some more bugs, I have extended the Enhancement Pack for PVHD 11.1,zip and attached a new one in post PureVisionHD 1080 - so please download again and install as described there
because I found some more bugs, I have extended the Enhancement Pack for PVHD 11.1,zip and attached a new one in post PureVisionHD 1080 - so please download again and install as described there
- Thread starter
- Moderator
- #3,348
This is fixed in the upcoming MP 1.31 Pre-Release (was a bug with hardcoded properties)
Hi, I don't know if this is a skin issue or a main MP problem?
When I go on holidays for a while there is a problem with the way main opening screen is displayed
Firstly a normal situation
1. The TV is on and a recording starts and shows an info box at the top of the screen
2. The TV is on and a recording stops and shows an info box at the top of the screen
3. The TV is turned off for the night and the HTPC subsequently records more shows that night all ok
4. During the night the HTPC goes to standby. The next morning the HTPC and TV start up and display the MP main screen
As expected this is all normal however when I go on holidays this is what happens
1. The TV is off while on holiday
2. The HTPC starts and records all the scheduled programs
3. On return from holidays the HTPC and TV are turned back on. When the HTPC and MP have finished starting there is no video showing but there is audio from the selected tv channel. The only thing that happens on the TV screen is ALL the recorded shows start / stop info boxes are displayed. There could be 10 or more of these boxes showing one after the other depending on the length of the holiday. As this can be a lengthy process I have to wait quite a while until it is finished
4. When the boxes have finished displaying the pre selected tv channel is then displayed all ok
It is like the info boxes take over the video duties until finished and then allow the main program video to display. In a normal situation the main program video would already be running and the info boxes overlayed on top.
I have attached a log file from when I restarted the HTPC on 26th August @ 13:42:56 after being away for only 1 night
Thanks
When I go on holidays for a while there is a problem with the way main opening screen is displayed
Firstly a normal situation
1. The TV is on and a recording starts and shows an info box at the top of the screen
2. The TV is on and a recording stops and shows an info box at the top of the screen
3. The TV is turned off for the night and the HTPC subsequently records more shows that night all ok
4. During the night the HTPC goes to standby. The next morning the HTPC and TV start up and display the MP main screen
As expected this is all normal however when I go on holidays this is what happens
1. The TV is off while on holiday
2. The HTPC starts and records all the scheduled programs
3. On return from holidays the HTPC and TV are turned back on. When the HTPC and MP have finished starting there is no video showing but there is audio from the selected tv channel. The only thing that happens on the TV screen is ALL the recorded shows start / stop info boxes are displayed. There could be 10 or more of these boxes showing one after the other depending on the length of the holiday. As this can be a lengthy process I have to wait quite a while until it is finished
4. When the boxes have finished displaying the pre selected tv channel is then displayed all ok
It is like the info boxes take over the video duties until finished and then allow the main program video to display. In a normal situation the main program video would already be running and the info boxes overlayed on top.
I have attached a log file from when I restarted the HTPC on 26th August @ 13:42:56 after being away for only 1 night
Thanks
The file "MediaPortal-Error.log" shows many errors that have this Windows error code: 0x80004005.
This page suggests that you should run Windows Update to fix the software error that causes this problem. As I have no experience of this error, I don't know whether Windows Update will actually fix the problem, but possibly worth trying?
-- from CyberSimian in the UK