QAM is the modulation of the signal, for example dvb-t in the uk is broadcast on qam-16 and qam-64. IE 16 si=ymbols and 64 symbols. You really only need to pay attention to what type of dvb signal you get in your area
In the US, some new HDTVs have "QAM" tuners (which I think means that it can view unencrypted 64-QAM and 256-QAM signals over cable).
Do these DVB-C cards, which are not meant for use in the US, support viewing of these signals? I posted a link earlier that does claim to have a QAM tuner, but:
1. Will this card be supported by MediaPortal?
2. I would like to have some choice in buying a TV card, so thats why I am interested in knowing if the DVB-C cards will work in the US for HD signals.
Not specifically but I have added basic BDA QAM support in MediaPortal but I don't know if it works yet...
If you're on the look-out for cards which definately do then the HVR-1600/1800 from Hauppauge now works under XP & Vista.
I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation.
"TV Server Config" has a "TV Mapping" panel in the "TV Channels" section. On the "TV Mapping" tab:
The left column lists the channels that have not yet been mapped to the TV tuner identified by the drop-down menu just...
I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation.
"TV Server...
I've scanned for channels, and got all channels mapped to tuner 0 of my 8 channel TV card (eg: 2 cards of 4 channels each)
Is there...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network.
Hauppauge card retired long ago. I have also retired very early SD units, the Quatros seem to work much better than the older units.
Go to SD's support website and download and install the windows...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network...
I am currently using a Hauppauge WinTV QuadHD PCIe card on MP1 (1.37) for DVB-T, but 2 of the tuners have died. Thinking about...
Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many tries, and it’s not clear what I am doing that makes it work on those occasions when it does. Cannot find guidance on the site.
Thanks, N.
Again, if anyone knows how to do this, would be much...
Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many...
Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many...