QAM Tuners (1 Viewer)

djshawnee

Portal Member
May 11, 2005
19
1
What QAM tuner cards work with MediaPortal? I have been searching the forums, but I can't find a list of what will/won't work.

Any recommendation on QAM tuner cards would be great. Thanks!

Shawn
 

funkstar

Retired Team Member
  • Premium Supporter
  • August 9, 2005
    771
    28
    Home
    Home Country
    Scotland Scotland
    I take it you mean DVB tuners?

    The Wiki have information on which DVB-T/S/C card are supported.
     

    funkstar

    Retired Team Member
  • Premium Supporter
  • August 9, 2005
    771
    28
    Home
    Home Country
    Scotland Scotland
    ATSC is like the US only version of DVB.

    I don't know anything about the US cable system, so i don't know if you will be able to get digital cable into your PC.

    Sorry i can't be more help.
     

    Jake m

    Portal Pro
    September 14, 2006
    52
    1
    Home Country
    United Kingdom United Kingdom
    QAM is the modulation of the signal, for example dvb-t in the uk is broadcast on qam-16 and qam-64. IE 16 si=ymbols and 64 symbols. You really only need to pay attention to what type of dvb signal you get in your area
     

    djshawnee

    Portal Member
    May 11, 2005
    19
    1
    In the US, some new HDTVs have "QAM" tuners (which I think means that it can view unencrypted 64-QAM and 256-QAM signals over cable).

    Do these DVB-C cards, which are not meant for use in the US, support viewing of these signals? I posted a link earlier that does claim to have a QAM tuner, but:

    1. Will this card be supported by MediaPortal?
    2. I would like to have some choice in buying a TV card, so thats why I am interested in knowing if the DVB-C cards will work in the US for HD signals.

    Here is another card I found:
    http://www.saveateagle.com/kwd-ats1...&ovcpn=Froogle&ovcrn=KWD-ATS115-V34&ovtac=CMP

    I am sure that I am not the only one wondering this in the US. I appreciate the comments so far! Thanks!

    Shawn
     

    dman_lfc

    Retired Team Member
  • Premium Supporter
  • July 28, 2004
    1,772
    30
    UK
    Home Country
    New Zealand New Zealand

    Users who are viewing this thread

    Similar threads

    I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation. "TV Server Config" has a "TV Mapping" panel in the "TV Channels" section. On the "TV Mapping" tab: The left column lists the channels that have not yet been mapped to the TV tuner identified by the drop-down menu just...
    I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation. "TV Server...
    I've scanned for channels, and got all channels mapped to tuner 0 of my 8 channel TV card (eg: 2 cards of 4 channels each) Is there...
    Replies
    1
    Views
    1K
    I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network. Hauppauge card retired long ago. I have also retired very early SD units, the Quatros seem to work much better than the older units. Go to SD's support website and download and install the windows...
    I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network...
    I am currently using a Hauppauge WinTV QuadHD PCIe card on MP1 (1.37) for DVB-T, but 2 of the tuners have died. Thinking about...
    Replies
    3
    Views
    2K
    Thankyou High_Five, that worked perfectly, I now remember doing that 10 years ago, thanks for jogging my old memory. Cheers Tony
    Thankyou High_Five, that worked perfectly, I now remember doing that 10 years ago, thanks for jogging my old memory. Cheers Tony
    Hi everyone, I have been using it For 16 years now (from V1.1.1) and it has worked flawlessly. I only use TV Series and Moving...
    Replies
    2
    Views
    465
    See my reply in the other thread. -- from CyberSimian in the UK
    See my reply in the other thread. -- from CyberSimian in the UK
    Any idea where can I get the Windows7 installation software for this AverMedia A323AF card. I found the drivers for the A323 which...
    Replies
    1
    Views
    2K
    MP1 MP2 Picture-in-picture DE
    Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many tries, and it’s not clear what I am doing that makes it work on those occasions when it does. Cannot find guidance on the site. Thanks, N. Again, if anyone knows how to do this, would be much...
    Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many...
    Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many...
    Replies
    0
    Views
    2K
    Top Bottom