SAF v4.00 ''stable'' (StandAlone Filters) - DXVA ready (H.264 and VC-1). (4 Viewers)

Should i integrate FFDshow in to SAF?

  • Yes

    Votes: 406 85.5%
  • No

    Votes: 69 14.5%

  • Total voters
    475

Spragleknas

Moderator
  • Team MediaPortal
  • December 21, 2005
    9,471
    1,822
    Located
    Home Country
    Norway Norway
    DVD video will not use DXVA - it is useless.
    Could you please elaborate what you mean when use say DXVA is useless for DVD?

    Hello.
    This is my personal experience with PowerDVD MPEG2 decoder.
    If i enable DXVA - DVD's opening time was longer, and picture quality was worse then in software mode. CPU usage was nearly the same.
    So i don't use it.
    Could it be that this is due to you not using a HT3 CPU (like Phenom) with your HD3200IGP?

    Ref.: AnandTech: AMD 780G: Preview of the Best Current IGP Solution
    Advanced de-interlacing is available when using a Phenom processor
    So for other ppl (w/780G+Phenom or stronger system) this might not be the same


    Also: List of capabilities: http://www.missingremote.com/index....=view&id=2564&Itemid=232&limit=1&limitstart=1
     

    Hemin

    Portal Pro
    December 29, 2006
    59
    4
    Home Country
    Spain Spain
    Because MTV Music Videos plugin don't work with FLV splitter:

    https://forum.team-mediaportal.com/plugins-47/mtv-music-videos-plugin-46483/

    I only get black screen when i load a videoclip

    OK, i manage to make it "work".
    You need to enable MTV music videos + MTV player in MP configuration, and install Adobe Flash player under IE (not under Firefox).
    Well, i only get MTV message "copyrights restrict us from playing this video outside the US", so it is absolutely usseles for me.

    So it have nothing to do with SAF (by other words, you don't need to disable SAF FLV splitter to make it work).

    Thanks hoborg i will try to install adobe flash on iexplorer tomorrow and let you know.
     

    hoborg

    Portal Pro
    June 13, 2008
    4,413
    1,644
    Nový Jičín
    Home Country
    Czech Republic Czech Republic
    Could you please elaborate what you mean when use say DXVA is useless for DVD?

    Hello.
    This is my personal experience with PowerDVD MPEG2 decoder.
    If i enable DXVA - DVD's opening time was longer, and picture quality was worse then in software mode. CPU usage was nearly the same.
    So i don't use it.
    Could it be that this is due to you not using a HT3 CPU (like Phenom) with your HD3200IGP?

    Ref.: AnandTech: AMD 780G: Preview of the Best Current IGP Solution
    Advanced de-interlacing is available when using a Phenom processor
    So for other ppl (w/780G+Phenom or stronger system) this might not be the same


    Also: List of capabilities: Missing Remote

    It is possible.
    But i realy don't want to spare any more money to buy new hardware. Curently i am very happy with my HTPC setup. DVD playback/live TV are very good in software mode using PowerDVD MPEG2 decoder.
    Maybe in future when price falls down, becouse price of AMD Phenom 9350e are simply hight for me and i am not sure if my passive Scythe Ninja can save such CPU from overheating.

    Because MTV Music Videos plugin don't work with FLV splitter:

    https://forum.team-mediaportal.com/plugins-47/mtv-music-videos-plugin-46483/

    I only get black screen when i load a videoclip

    OK, i manage to make it "work".
    You need to enable MTV music videos + MTV player in MP configuration, and install Adobe Flash player under IE (not under Firefox).
    Well, i only get MTV message "copyrights restrict us from playing this video outside the US", so it is absolutely usseles for me.

    So it have nothing to do with SAF (by other words, you don't need to disable SAF FLV splitter to make it work).

    Thanks hoborg i will try to install adobe flash on iexplorer tomorrow and let you know.

    Well, i think you will only see "copyrights restrict us from playing this video outside the US" message...
     

    Spragleknas

    Moderator
  • Team MediaPortal
  • December 21, 2005
    9,471
    1,822
    Located
    Home Country
    Norway Norway
    Or just get a cheap HD4xxx ;)

    My point was that your statement regarding DXVA and SD PQ might and might not be true, depending in hardware. (No disrespect).
    Keep up the great work :D)
     

    henk99

    Portal Pro
    October 7, 2008
    167
    3
    Home Country
    Netherlands Netherlands
    DTS stutters

    Hi, I have also asked this question in the newcomer forum, but later thought it might be related to the SAF package?

    When testing my htpc system with the TV and Receiver, I came across some strange DTS problems.

    Some mkv movies with DTS have a strange stuttering sound, while other files with, apparently the same DTS track don't have it, and have normal sound. When looking at the audio properties of both good and bad files, they are a match.

    Both of them show in the properties:
    DTS 48000Hz 6ch [Audio]

    So, I can't find any difference between them. Why is the sound playback good or bad then? Is it decoded badly? I think I have all settings correct, especially as some DTS files are fine....
    I have tried MPA, Cyberlink 7.x but found no difference.

    BTW...Sound is going through the optical output SPDIF of my Gigabyte GA-MA78 mobo to the receiver.
     

    hoborg

    Portal Pro
    June 13, 2008
    4,413
    1,644
    Nový Jičín
    Home Country
    Czech Republic Czech Republic
    SAF v.3.11 out
    - MPC-HC filters updated to v.1.1.906.0
    - enabled DXVA for MPEG2/DVD/LiveTV SD when using ''CLVsd.ax'' (nice deinterlacing)
     

    Spragleknas

    Moderator
  • Team MediaPortal
  • December 21, 2005
    9,471
    1,822
    Located
    Home Country
    Norway Norway
    - enabled DXVA for MPEG2/DVD/LiveTV SD when using ''CLVsd.ax'' (nice deinterlacing)
    Hope you didn't do that because of my statement above :) As I said, you might get better deinterlacing using SW, but it depends on how good your HW (or SW) is. Perhaps an option to select/deselect DXVA would be nice?
    (I never tested startup time for DVD w/wo DXVA, so you might have a point here)

    :D again for doing this. I really think it makes MP more user-friendly for many ppl.
     

    MrOrsh

    Portal Member
    November 3, 2008
    45
    0
    Ok, I now have reinstalled everything. A clean XP install.
    After this a installed Haali Media Splitter, then SAF 3.11 and the MediaPortal.

    Now some files play perfecly but some, like this (that you testet yesterday and just showed a black picture for me) Download Lost S04E01 720p HDTV x264 CTU 001 mkv free at Uploading.com has stutter and plays for about 6-7 secounds, than hangs just displaying two frames stuttering back and forth.

    In graphstudio it looks like this:

    Could it be something wrong with me not having assign max. shared memory to GPU in BIOS? I´m not sure exactly how to do this thou.

    Oh, that´s right, the link to the killer_smple that´s beeing used all over the internet.
    http://data.fuskbugg.se/skalman01/killer_sample.mkv
     

    hoborg

    Portal Pro
    June 13, 2008
    4,413
    1,644
    Nový Jičín
    Home Country
    Czech Republic Czech Republic
    Ok, I now have reinstalled everything. A clean XP install.
    After this a installed Haali Media Splitter, then SAF 3.11 and the MediaPortal.

    Now some files play perfecly but some, like this (that you testet yesterday and just showed a black picture for me) Download Lost S04E01 720p HDTV x264 CTU 001 mkv free at Uploading.com has stutter and plays for about 6-7 secounds, than hangs just displaying two frames stuttering back and forth.

    In graphstudio it looks like this:

    Could it be something wrong with me not having assign max. shared memory to GPU in BIOS? I´m not sure exactly how to do this thou.

    Hello.
    To use graphstudio correctly, you need to start MP in window mode, start some of your video in MP, then start graphstudio and connect to remote graph (not open video file in graphstudio).
    Please, do it this way and post another screenshot (you can post it directly here, no need to use imageshack.
    To assing memory in BIOS - restart your PC and hold "DEL" key until BIOS screen apear - check your BIOS manual (maybe on manufacturer pages if you dont have manual book) where you can assign memory for iGPU.

    - enabled DXVA for MPEG2/DVD/LiveTV SD when using ''CLVsd.ax'' (nice deinterlacing)
    Hope you didn't do that because of my statement above :) As I said, you might get better deinterlacing using SW, but it depends on how good your HW (or SW) is. Perhaps an option to select/deselect DXVA would be nice?
    (I never tested startup time for DVD w/wo DXVA, so you might have a point here)

    :D again for doing this. I really think it makes MP more user-friendly for many ppl.

    Well, a little :)
    I just did some testing, and deinterlacing are much better when DXVA is enabled. DVD open time is OK too. I used PDVD7 decoder before, maybe they did some modifications in PDVD8.
    Thanks for tip :)

    BTW - don't you have any idea why PDVD8 decoder don't apear in MP DirectShow filters configuration?
     

    Users who are viewing this thread

    Top Bottom