Scanning for channels hangs again (2 Viewers)

[noddy]

Hi

I did a lot of testing like infinityloop. I used a system with a clean WinXP SP2 installation (see attached screen shot). The only additional Patches I performed are KB896626 (DVB-Patch) & KB909095 (Hibernate-Problem by memsize > 1GB).
I installed the latest hardware driver for the MB & graphic card (ATI X800 GTO).

I used TV3 (Rev.15008) & SVN (Afternoon 06-26-2007, Rev.15008)

I tested:

1.) Terratec Cinergy 1200 DVB-S (BDA-Driver 4.8.16)
The channel scan crashed.

2.) TechniSAT SkyStar 2 (WDM Driver 4.4.0)
Channel scan worked

3.) TechniSAT SkyStar 2 (WDM Driver 4.4.1)
Channel scan worked

4.) TechniSAT SkyStar 2 (BDA Driver 4.4.1)
The channel scan crashed.

The log files and the corresponding entries from the event log are in the attached zip files.

I hope this will help to solve the problem. It seems that the connection to the BDA driver cause the crash

I did right now a quick check of the new TSWriter.ax which Frodo provided
Frodo
on my normal machine WinXP incl. all updates. The scan crashed as well (see attached file).

to all developers - A great job so fare - keep going
& to infinityloop & all others which try to help each other

Noddy

 

[aquamax]

How I solved/fixed the issue

My TVServer-Specs: See left

Okay, as i wrote in the past in this thread, i could solve the problem with help from this thread:
https://forum.team-mediaportal.com/dvb_s_setup_crash-t23712.html?t=23712&highlight=11856

MP-User "Ernie" has solved the Problem, but he did'nt understand why!!!

there is a rar attached with 3 files:
- 2 Systemfiles
- 1 Batch-File

Content of Batch-File (I fixed 2 Quotes)
%windir%\system32\regsvr32 /u mpeg2data.ax
%windir%\system32\regsvr32 /u psisdecd.dll
%windir%\system32\regsvr32 "%~dp0mpeg2data.ax"
%windir%\system32\regsvr32 "%~dp0psisdecd.dll"


"%~dp0" means current directory!

The Batch unregisters the 2 System-Files in the System-Directory and registers the new Files in the Directory where the Batch-File is stored.

After Batch-Execution and reboot, the Problem was fixed and i never had a crash again while scanning!

So, can anybody test this and give feedback?
Can anybody analyze the new Files?

The fixed rar see attachment.


Hope this works!

aquamax

 

[noddy]

Probleme fixed

aquamax: This patch is working also fine on my machíne.

I did a complete channel scan with my Cinergy 1200 DVB-S a few minutes ago.
The scan crashed previously on 11856,V,27500 as ernie mentioned in his post.

This is now part

 

[yyyyyves]

Thank you. It seems to work fine on my machine too.

Regards
Yyyyyves

 

[Frodo]

Not all bugs are caused by MP/TV3 ;-)
Frodo

 

[led7]

Hi

i have the tweihter tested at work super for me , i have the ss2 Card the channelscan work to 100% i have a installet the dvb fix

Thx Mediaportalteam

Sorry for my englich I a geman Member

greats

led7

 

[infinite.loop]

My TVServer-Specs: See left

Okay, as i wrote in the past in this thread, i could solve the problem with help from this thread:
https://forum.team-mediaportal.com/dvb_s_setup_crash-t23712.html?t=23712&highlight=11856

MP-User "Ernie" has solved the Problem, but he did'nt understand why!!!

there is a rar attached with 3 files:
- 2 Systemfiles
- 1 Batch-File

Content of Batch-File (I fixed 2 Quotes)
%windir%\system32\regsvr32 /u mpeg2data.ax
%windir%\system32\regsvr32 /u psisdecd.dll
%windir%\system32\regsvr32 "%~dp0mpeg2data.ax"
%windir%\system32\regsvr32 "%~dp0psisdecd.dll"


"%~dp0" means current directory!

The Batch unregisters the 2 System-Files in the System-Directory and registers the new Files in the Directory where the Batch-File is stored.

After Batch-Execution and reboot, the Problem was fixed and i never had a crash again while scanning!

So, can anybody test this and give feedback?
Can anybody analyze the new Files?

The fixed rar see attachment.


Hope this works!

aquamax

at first thanks!

these files are part of a patch M$ released for windowsMCE 2005 to fix an issue which made it impossible to use more than one BDA-tuner.
however, M$ has still not released this patch for WindowsXP

the only way to patch WindowsXP is the way you describe in your post.

i have added this patch to the wiki:requirements and updated the ::thread:: about it in the forums.

 

[pastimer]

Hi,

I just did a fresh install of tvengine with tonights svn.
Im using XP sp2 and use TT-3200 card with diseqc 1.0.
TVSERVER crashes during channel scan:

Here is my error.log:

log deleted by infinityloop: ATTACH THE LOG FILES!!!!

 

[infinite.loop]

Hi,

I just did a fresh install of tvengine with tonights svn.
Im using XP sp2 and use TT-3200 card with diseqc 1.0.
TVSERVER crashes during channel scan:

have you installed ::these patches:: (Updates)?

 

[pastimer]

Problem solved

What a relieve...

About a year ago i tried MP for the first time. Although i liked it very much i could not use it because at the time diseqc nor my cam worked.

But this time, after i set myself to read the f***** manual, everything works.

MP, I will never let you down again, i promise!