Sleeping (2 Viewers)

Dylan80

New Member
April 29, 2013
2
1
45
Home Country
Australia Australia
hi just got the up and running, streaming everything is perfect. while my htpc is suspended (s3) i cannot access the webportal at all, is there a solution to this? otherwise its no good to me :(
 

Oxan

Retired Team Member
  • Premium Supporter
  • August 29, 2009
    1,730
    1,124
    Home Country
    Netherlands Netherlands
    If you've turned your microwave off, are you surprised it doesn't heat your food?

    If you suspend your HTPC to RAM (S3), everything except the RAM is powered off. So it's impossible to run WebMediaPortal (or any other application) in that state, since the network and CPU are turned off.
     

    mbuzina

    Retired Team Member
  • Premium Supporter
  • April 11, 2005
    2,839
    726
    Germany
    Home Country
    Germany Germany
    Well, you can wake your PC on Network traffic. Either let it wake on any packet or on the "Magic" Packet. In the first case your htpc will be awoken by any traffic in ist direction (will result on the htpc turining on more often and sometimes based on some Internet traffic) in the second case you need to be on the local net and have a wake-on-lan app (e.g. CouchPotato iPhone app does this) or have a router that can wake your PC (like Fritz.boxes can).

    But basically Oxans answer is correct: If the PC is sleeping you have to wake it first ;-)
     

    Dylan80

    New Member
    April 29, 2013
    2
    1
    45
    Home Country
    Australia Australia
    thanks mbuzina for providing the only decent respectful answer, yes waking the htpc is obviously what i was refering to, just so the "less informed" posters know what we are talking about.

    seriously Oxan, a dev on the official team...
     

    jwe

    Portal Pro
    November 17, 2011
    64
    57
    Germany/Hessen/MKK
    Home Country
    Germany Germany
    thanks mbuzina for providing the only decent respectful answer, yes waking the htpc is obviously what i was refering to, just so the "less informed" posters know what we are talking about.

    seriously Oxan, a dev on the official team...
    don't be angry! You brought a laugher!

    Your question was really misunderstandig as "Can i use this while it's turned off?"
     

    Oxan

    Retired Team Member
  • Premium Supporter
  • August 29, 2009
    1,730
    1,124
    Home Country
    Netherlands Netherlands
    seriously Oxan, a dev on the official team...
    Sorry, I didn't mean to let your faith in the team down, but you have to keep this in mind: in addition to personally creating and maintaining the biggest part of MPExtended, I've been answering support questions daily for the last two years. All in my free time, for very little personal benefit at all. To be honest, I don't even like it that much, I'd very much prefer writing code. But since I appreciate it that others answer when I ask them questions about their software, and no one else answers questions about MPExtended, I provide support for my own software. Add the sheer volume of questions to that, and it's impossible to put a lot of effort in every answer I give, especially when I'm having a bad day. When I get the same question for the tenth time, yes, that may result in a sarcastic answer. It's hard, I know, but you shouldn't take that personally.

    Also, English isn't my first language (and I assume it isn't yours either), so it's easy for a miscommuncation to happen. Your second post makes it clear that you were referring to remotely waking up your PC, but my initial interpretation of your first post was that you wanted to use WebMediaPortal while your HTPC was suspended. Being explicit with the risk of over-explaning obvious things is always better than leaving things out, especially if you are asking others for support.
     

    JiRo

    MP Donator
  • Premium Supporter
  • May 1, 2009
    184
    44
    Prague
    Home Country
    Czech Republic Czech Republic
    Hi Dylan80, Oxan and others...

    This is a good thread - questions, irony, and apologies... :LOL: Yes I know it and understand it... It's hard to decide if my server will run continuously or on request only. I use the second possibility. By my local MediaPortal clients isn't problem, there is a native solution - integrated WOL packet sending or obsolete but still well-functioning pair of software MPHSClient and HomeServer plugin. But MPExtended WebMediaPortal and his think cilent, it is another problem. There is two possible solution. First, permanently running server and second, as mbuzina wrote, WOL over Internet. As I wrote, I use the second possibility. Therefore based on my experience I recommend:
    1. solve WOL over internet (the corresponding router and port forwarding setup and static ARP table setup)
    2. use one of the number internet pages with WOL packet sending service (I use URL with parameters www.depicus.com/wake-on-lan/woli.aspx?m=001FD097F8E5&i=XXX.XXX.XXX.XXX&s=255.255.255.255&p=7 saved as bookmark, so wake of my server is just "one click" only - work perfect!)
    That is all. Do not be afraid of it. And do not be angry at Oxan. His work and patience is amazing and thanks for it. I say: "MPExtended WebMediaPortal is another dimension of MediaPortal."

    JiRo.
     
    Last edited:

    Users who are viewing this thread

    Similar threads

    Greetings to all Denizens of the land of MediaPortal... It seems our Zap2XML/GraceNote access is broken again. I (as many others) have been using the latest NewZap2xml_6 and it has worked flawlessly. A few days ago it all died. I wonder if anyone is working a solution to save the masses. I am hoping the good citizen of past is...
    Greetings to all Denizens of the land of MediaPortal... It seems our Zap2XML/GraceNote access is broken again. I (as many others)...
    Greetings to all Denizens of the land of MediaPortal... It seems our Zap2XML/GraceNote access is broken again. I (as many others)...
    Replies
    0
    Views
    746
    I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For the first example, I highlighted the example text and eventually found the location in the menus where I could select the CODE macro to have the example text formatted as a code example. So far, so good...
    I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For...
    I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For...
    Replies
    0
    Views
    516
    I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ? MP(1) will only use LAV if you select "Internal DirectShow player" as music output, but then you lose gapless playback. If you you don't have multichannel music you can choose WASAPI as the output and set the number of speakers to stereo. I have...
    I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ? MP(1) will only use LAV if you select...
    Not sure if this a a bug/config/settings problem. I am running a media portal 2.5 server with 2.41 client but it seems I get the...
    Replies
    1
    Views
    647
    YES, Thanks
    YES, Thanks
    Help please. Error could have started happening after upgrade to 1.38 on 2025-08-04. Thank you EDIT: I have installed 1.38.0...
    Replies
    18
    Views
    5K
    OK....perhaps impatient of me I know, but went for a full reinstall....and now up and running once more. Have no idea what was at the root of this problem....still wondering if it may've been due to a Win11 update earlier this week?
    OK....perhaps impatient of me I know, but went for a full reinstall....and now up and running once more. Have no idea what was at...
    Have used MP1.38 64 successfully since it's introduction.....now something has changed. Video folders are still present.....but now...
    Replies
    3
    Views
    1K
    Top Bottom