SS2 et MP (1 Viewer)

zebons

Portal Pro
January 2, 2006
1,484
114
Sur le site officiel de MP, j'ai bien trouvé un tutorial mais quand dans le module TV, je cherche à ajouter ma Capture Card comme indiqué, MP me répond qu'aucun device n'a été trouvé et qu'il n'est pas possible de le configurer...
Pourtant ma carte SS2 fonctionne parfaitement avec MyTheatre.
J'utilise le driver technisat 4.3.0

Quelqu'un a une idée ?
 

zebons

Portal Pro
January 2, 2006
1,484
114
Le message exact pout être précis :
Après clic sur le bouton Add dans la fen^tre de configuration des Capture Cards, j'obtien un premier message :

No video device was found, we won't be able to configure a capture card.

puis après clic sur OK pour valider ce message, j'obtiens un second message d'erreur :

No video capture Card(s) were found, we won't be able to configure a capture card.
 

mbb

Portal Pro
November 20, 2004
374
15
Home Country
France France
Est ce que server4PC est bien lancé quand tu lance la detection dans MP (wizard ou configuration) ?
 

zebons

Portal Pro
January 2, 2006
1,484
114
Originally posted by mbb@15 Jan 2006, 23:25
Est ce que server4PC est bien lancé quand tu lance la detection dans MP (wizard ou configuration) ?
<div align="right"><{POST_SNAPBACK}>
[/quote]
Non, je n'ai installé que la carte avec ses drivers. Je ne pensais pas que ce logiciel était utile pour MP (MyTheatre ne s'en sert pas...).
Je vais l'installer et vous fais un retour.
 

zebons

Portal Pro
January 2, 2006
1,484
114
Originally posted by zebons+16 Jan 2006, 02:28 --><div class='quotetop'>CITATION(zebons @ 16 Jan 2006, 02:28 )</div>
<!--QuoteBegin-mbb
@15 Jan 2006, 23:25
Est ce que server4PC est bien lancé quand tu lance la detection dans MP (wizard ou configuration) ?
<div align="right"><{POST_SNAPBACK}>
Non, je n'ai installé que la carte avec ses drivers. Je ne pensais pas que ce logiciel était utile pour MP (MyTheatre ne s'en sert pas...).
Je vais l'installer et vous fais un retour.
<div align="right"><{POST_SNAPBACK}></div>
[/b][/quote]
J'ai installé Server4PC (tout est OK signal Vert à 83%) mais j'ai tjrs le même message d'erreur sous MP
<
 

zebons

Portal Pro
January 2, 2006
1,484
114
Ma config :

Boitier Silverstone LC16M
Carte Asus P4P800
Proc Celeron (en attente du PM 1,7GHz)
Ram 1024K
Carte graphique MSI 9250
Carte TV Skystar 2 Driver 4.2.11
DD 1x30Go (Système) 2x160Go en Raid1 pour les données
Win XP Pro SrvPck 2
MP V0.2RC2 cvs du 11/01/06
Windows Media Player 9
Windvd 5
Mytheatre 3.33.5
Ant Movie Catalog (pas encore réussi à intégrer ma base dans MP...)
 

Users who are viewing this thread

Similar threads

So, habe jetzt mal die komplette MP Installation deinstalliert und wieder installiert und nur den Videio-Ordner hinzugefügt. LAV-Filter installiert und Default-Device im Audio-Renderer eingestellt (war auch vordefiniert). Und gleiches Problem, MP stürzt beim Beenden eines Filmes ab.
So, habe jetzt mal die komplette MP Installation deinstalliert und wieder installiert und nur den Videio-Ordner hinzugefügt...
Hallo zusammen, seit einiger Zeit habe ich das Problem, dass der integrierte VideoPlayer von MP abstürzt, sobald das Videofile...
Replies
3
Views
796
MP1 MP2 MP-TVSeries DE
Just tried to install it from the extension manger, and the it works like a charm ...
Just tried to install it from the extension manger, and the it works like a charm ...
I just had to reinstall my MePo due to windows 11 upgrade. And since i was told MePo 2 is not being maintaind, i thought well lets...
Replies
4
Views
1K
maybe setting loglevel to debug might pinpoint the difference between normal and stuck? Preferable with as much disabled as possible also try to see if anything is happening during stuck for the mediaportal process(resource monitor, disk activity, cpu usage, anything) maybe other programs competing for resouces?
maybe setting loglevel to debug might pinpoint the difference between normal and stuck? Preferable with as much disabled as...
Since over a year my MP sometimes stucks while showing the welcome screen. It started once a week now it happens every second time...
Replies
4
Views
1K
After many hours of troubleshooting I've given up and accepted that it's just "one of these things" when using madVR for watching live TV. I've now ticked the box to "Use EVR for LiveTV", with a default display refresh rate of 50Hz. In combination with tweaking some of the Nvidia 3D settings for the MP executable only, I now have a...
After many hours of troubleshooting I've given up and accepted that it's just "one of these things" when using madVR for watching...
Every so often, when I switch to a TV channel, my MP client stops accepting user inputs, either from the remote or keyboard/mouse...
Replies
30
Views
8K
Works like a charm with both MySQL and Maria database. Thank you very much!
Works like a charm with both MySQL and Maria database. Thank you very much!
After a clean MP and MySQL uninstallation and deleting all MP and MySQL program and data folders the new MP 1.38 installation fails...
Replies
2
Views
875
Top Bottom