Status of Twinhan CI support (1 Viewer)

sapateira

Portal Member
February 21, 2006
6
0
ziphnor said:
I dont know much about CAMs, is the CAM you are using one that can emulate different type of CAMs or what? Or are you talking about emulating the access card itself? If its the last i assume you have one legitimate access card, so why dont you try that and see if it works?

Apart from that, i can recommend a reinstall of Windows and MediaPortal, it solved by stuttering/freezing problem.

That's just the point of Matrix and Dragon CAMs... Decryption emulating a real access card, legitimate... or NOT :twisted:
 

ziphnor

Retired Team Member
  • Premium Supporter
  • August 4, 2005
    755
    13
    Copenhagen
    Home Country
    Denmark Denmark
    sapateira said:
    That's just the point of Matrix and Dragon CAMs... Decryption emulating a real access card, legitimate... or NOT :twisted:

    Then why not just try the real access card instead, to check if the emulation is the problem? If you dont have the real access card i dont think you should expect any help here for obvious reasons. I have a SmartWi cardsplitter which doesnt seem to cause any problems ( http://www.smartwi.net/ ) with my Twinhans.
     

    Crapz

    Retired Team Member
  • Premium Supporter
  • September 8, 2004
    12
    0
    Status: Working
    Card Type: DVB-S
    CAM: T-Rex v4.01 (Dragon CAM)
    CAM Firmware: Predator 331
    DVB Viasat DK
    FTA: YES
    Scrambled: YES

    cant tune any channels on TP 17 12034 H SR 27500 FEC 3/4

    i can see them on my Crappy viasat resiver ;( it's not the CAM must be the card / Driver
    can't see the channels in Mythearter or in Twinhans software anyone in DK that have the same problem or can see the channels on that TP ???

    Okay good news i have all the not my sat cabel was to long :D

     

    tompa

    MP Donator
  • Premium Supporter
  • October 3, 2005
    665
    34
    Stockholm
    Home Country
    Sweden Sweden
    Using: MediaPortal_0.2_RC3 & RC4
    Status: Working
    Card Type: Twinhan DVB-T CI VP-3040
    CAM: SCM Microsystem EuroCam
    CAM Firmware: ?
    DVB Provider: Boxer Sweden
    FTA: ?
    Scrambled: Yes
     

    cloudy

    New Member
    April 6, 2006
    1
    0
    Using: MediaPortal_0.2_RC3
    Status: Working
    Card Type: TwinhanDtv Cab Ci (VP2031, firmware 1.0 Beta 01 )
    Card Drivers: BDADriverV1.2.3.5_WHQL
    CAM: Viaccess
    CAM Firmware: v4.84
    DVB Provider: Selector TDC KabelTV DVB-C
    FTA: YES
    Scrambled: YES (also testchannel CMore HD working)

    One channel, Vh1 classic can't be shown with MediaPortal, but works with MyTheatre.v3.35.1 (also using BDA).
     

    ziphnor

    Retired Team Member
  • Premium Supporter
  • August 4, 2005
    755
    13
    Copenhagen
    Home Country
    Denmark Denmark
    cloudy said:
    Using: MediaPortal_0.2_RC3
    Status: Working
    Card Type: TwinhanDtv Cab Ci (VP2031, firmware 1.0 Beta 01 )
    Card Drivers: BDADriverV1.2.3.5_WHQL
    CAM: Viaccess
    CAM Firmware: v4.84
    DVB Provider: Selector TDC KabelTV DVB-C
    FTA: YES
    Scrambled: YES (also testchannel CMore HD working)

    One channel, Vh1 classic can't be shown with MediaPortal, but works with MyTheatre.v3.35.1 (also using BDA).

    Hi, i am also from Denmark, using the same card, same CAM and same cable provider ( except for driver version 1.2.3.6 instead ).

    I have VH1 working, you need to choose the channel originally identified as VH1/bl not the one called VH1/Cla (at some point i had both working, and verified that the content is identical).

    Do you have sound on Discovery? (because i dont right now)

    Could you perhaps list you system specs, im having stuttering problems with Cool&Quiet enabled, and i would very much like to know whether you are also using an AMD CPU.
     

    bigal

    Portal Pro
    September 18, 2005
    159
    0
    Gothenburg
    I know the answer and it is that my provider doesn't transmit more then those two in the epg-standard the rest is transfered encryptet to the cable-box

    /BigAl
     

    ziphnor

    Retired Team Member
  • Premium Supporter
  • August 4, 2005
    755
    13
    Copenhagen
    Home Country
    Denmark Denmark
    bigal said:
    I know the answer and it is that my provider doesn't transmit more then those two in the epg-standard the rest is transfered encryptet to the cable-box

    Damn :(

    I wonder how MP handles it if you enable both xmltv tv guide and DVB EPG. In theory it allows you to get corections to the program in time(as you can see one program ahead), but somehow i doubt that it would work properly :)
     

    martin_gren

    Portal Member
    May 24, 2006
    14
    0
    Status: Working (MP 0.2 RC4)
    Card Type: Twinhan DVB-C
    CAM: Conax
    DVB Provider: Comhem (Sweden)
    FTA: YES
    Scrambled: YES
    BDA Driver: 1.2.3.8


    /Martin
     

    csg

    New Member
    August 6, 2005
    2
    0
    Denmark
    Status: Working (MP 0.2 RC4 Build mediaportal-svn-05-31-2006--01-02)
    Card Type: Twinhan DVB-S (1030A)
    Card Drivers: BDADriverV1.2.3.8_WHQL
    CAM: T-REX CAM
    CAM Firmware: Predator 343
    DVB Provider: Viasat NDS
    FTA: YES
    Scrambled: Yes

    Diseqc not working. Have to change manualy in DBA console program
    Very slow to decode chanels about 15-20 sec to descramble chanels. :cry: But still working
     

    Users who are viewing this thread

    Top Bottom