[Bug] TV: missing audio stream in records (Sky) (1 Viewer)

HTPCSourcer

Retired Team Member
  • Premium Supporter
  • May 16, 2008
    11,418
    2,335
    Home Country
    Germany Germany
    The original bug which I believe we all saw a few months ago, might have been observed with a different DD driver vrsion than the current one. I guess we are now all running the latest version.

    I understand that the thread starter @Brette did not point out problems with the second stream but with the third and other additional languages. Testing this will be difficult because very few movies have more than two language streams.
     

    Stéphane Lenclud

    Retired Team Member
  • Premium Supporter
  • April 29, 2013
    2,576
    1,294
    Home Country
    Germany Germany
    Mine was definitely happening on movies with only two audio tracks: german and english.
    I think it would occur even when a single recording was running but not systematically.
     

    radical

    Portal Pro
    December 16, 2010
    1,466
    191
    Home Country
    Germany Germany
    I don't can speak for the DD Users, but from my expirence it was the second audio stream (mostly english in DolbyD) that got missing in recordings from sky cinema HD with my TBS 6981.
     

    Stéphane Lenclud

    Retired Team Member
  • Premium Supporter
  • April 29, 2013
    2,576
    1,294
    Home Country
    Germany Germany
    Ok so if you are having the same problem with non DD hardware than it's not likely to be a DD specific issue is it?
     

    radical

    Portal Pro
    December 16, 2010
    1,466
    191
    Home Country
    Germany Germany
    You're right. The mainproblem is not specific to DD Hardware. But with the Patch from mm it's also solved. The remaining problem is, it got side effects on DD hardware. And that is, as far I understood, mm is triyng to solve.
     

    Zoidberg77

    MP Donator
  • Premium Supporter
  • July 12, 2011
    392
    206
    Home Country
    Germany Germany
    Hi,
    you should really try this experiment with a prime-time movie on sunday on Sky Cinema when there is a one-audio-track-only show (e.g. Making Of) in the beginning.
     

    mm1352000

    Retired Team Member
  • Premium Supporter
  • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    Thanks guys :)

    Languages can be switched forth and back - both streams are audible
    From your log files it looks like both streams were present from the start, so there will be no problem with decrypting:
    [collapse]
    [2014-07-30 13:41:14,933] [65e6cc8] [2dd0] - pmtgrabber: got pmt 64 sid:83
    [2014-07-30 13:41:14,933] [65e6cc8] [2dd0] - pmtgrabber: PMT pids changed from:
    [2014-07-30 13:41:14,933] [65e6cc8] [2dd0] - pcr pid: 0
    [2014-07-30 13:41:14,933] [65e6cc8] [2dd0] - pmt pid: 0
    [2014-07-30 13:41:14,933] [65e6cc8] [2dd0] - pmtgrabber: PMT pids changed to:
    [2014-07-30 13:41:14,933] [65e6cc8] [2dd0] - pcr pid: 4ff
    [2014-07-30 13:41:14,933] [65e6cc8] [2dd0] - pmt pid: 64
    [2014-07-30 13:41:14,933] [65e6cc8] [2dd0] - video pid: 4ff type: H264
    [2014-07-30 13:41:14,933] [65e6cc8] [2dd0] - audio pid: 503 language: deu type: AC3
    [2014-07-30 13:41:14,933] [65e6cc8] [2dd0] - audio pid: 504 language: eng type: AC3[/collapse]

    When the audio streams changed, first a stream was removed:
    [collapse]
    [2014-07-30 14:20:54,067] [65e6cc8] [2dd0] - pmtgrabber: PMT pids changed from:
    [2014-07-30 14:20:54,067] [65e6cc8] [2dd0] - pcr pid: 4ff
    [2014-07-30 14:20:54,067] [65e6cc8] [2dd0] - pmt pid: 64
    [2014-07-30 14:20:54,067] [65e6cc8] [2dd0] - video pid: 4ff type: H264
    [2014-07-30 14:20:54,067] [65e6cc8] [2dd0] - audio pid: 503 language: deu type: AC3
    [2014-07-30 14:20:54,067] [65e6cc8] [2dd0] - audio pid: 504 language: eng type: AC3
    [2014-07-30 14:20:54,067] [65e6cc8] [2dd0] - pmtgrabber: PMT pids changed to:
    [2014-07-30 14:20:54,067] [65e6cc8] [2dd0] - pcr pid: 4ff
    [2014-07-30 14:20:54,067] [65e6cc8] [2dd0] - pmt pid: 64
    [2014-07-30 14:20:54,067] [65e6cc8] [2dd0] - video pid: 4ff type: H264
    [2014-07-30 14:20:54,067] [65e6cc8] [2dd0] - audio pid: 503 language: deu type: AC3
    [2014-07-30 14:20:54,067] [65e6cc8] [2dd0] - pmtgrabber: got new pmt version:a 9, service_id:83[/collapse]

    ...then it was added again:
    [collapse]
    [2014-07-30 14:20:54,504] [65e6cc8] [2dd0] - pmtgrabber: got new pmt version:b a, service_id:83
    [2014-07-30 14:20:54,504] [65e6cc8] [2dd0] - pmtgrabber: NO callback done because a/v pids still the same.
    [2014-07-30 14:26:38,048] [65e6cc8] [2dd0] - pmtgrabber: got new pmt version:c b, service_id:83
    [2014-07-30 14:26:38,048] [65e6cc8] [2dd0] - pmtgrabber: NO callback done because a/v pids still the same.
    [2014-07-30 14:26:38,423] [65e6cc8] [2dd0] - pmtgrabber: PMT pids changed from:
    [2014-07-30 14:26:38,423] [65e6cc8] [2dd0] - pcr pid: 4ff
    [2014-07-30 14:26:38,423] [65e6cc8] [2dd0] - pmt pid: 64
    [2014-07-30 14:26:38,423] [65e6cc8] [2dd0] - video pid: 4ff type: H264
    [2014-07-30 14:26:38,423] [65e6cc8] [2dd0] - audio pid: 503 language: deu type: AC3
    [2014-07-30 14:26:38,423] [65e6cc8] [2dd0] - pmtgrabber: PMT pids changed to:
    [2014-07-30 14:26:38,423] [65e6cc8] [2dd0] - pcr pid: 4ff
    [2014-07-30 14:26:38,423] [65e6cc8] [2dd0] - pmt pid: 64
    [2014-07-30 14:26:38,423] [65e6cc8] [2dd0] - video pid: 4ff type: H264
    [2014-07-30 14:26:38,423] [65e6cc8] [2dd0] - audio pid: 503 language: deu type: AC3
    [2014-07-30 14:26:38,423] [65e6cc8] [2dd0] - audio pid: 504 language: eng type: AC3
    [2014-07-30 14:26:38,423] [65e6cc8] [2dd0] - pmtgrabber: got new pmt version:d c, service_id:83
    [2014-07-30 14:26:38,423] [65e6cc8] [2dd0] - pmtgrabber: do callback pid 64[/collapse]

    So this was a good attempt, but not quite what we are looking for.

    restarting Sky #2 is not possible - getting "channel is encrypted"
    Again!?! Hmmmm, this is really interesting. What is especially interesting to me is that it looks like TV Server tries and fails with all three of your free tuners.


    Waited past 20:15 for the start of the movie to switch back to recorded channel.
    All audio streams ok.
    Same also for you. The audio streams were all present at the start of the recording, so the test did not work.
    [collapse]
    [2014-07-30 20:13:46,903] [Log ] [scheduler thread] [INFO ] - Scheduler: Time to record Sky Cinema HD 20:13-21:55 The Sapphires
    ...
    [2014-07-30 20:13:47,967] [Log ] [scheduler thread] [DEBUG] - Digital Devices:--> Setting service id 131 for decrypting returned 0
    [2014-07-30 20:13:47,970] [Log ] [scheduler thread] [INFO ] - subch:0 cam flags:True
    [2014-07-30 20:13:47,974] [Log ] [scheduler thread] [INFO ] - subch:0 SetMpegPidMapping
    [2014-07-30 20:13:47,975] [Log ] [scheduler thread] [INFO ] - subch:0 pid:4FF pcr
    [2014-07-30 20:13:47,977] [Log ] [scheduler thread] [INFO ] - subch:0 pid:64 pmt
    [2014-07-30 20:13:47,979] [Log ] [scheduler thread] [INFO ] - subch:0 pid:20 teletext type:6
    [2014-07-30 20:13:47,980] [Log ] [scheduler thread] [INFO ] - subch:0 map pid:20 teletext type:6
    [2014-07-30 20:13:47,982] [Log ] [scheduler thread] [INFO ] - subch:0 pid:4FF video type:H.264
    [2014-07-30 20:13:47,983] [Log ] [scheduler thread] [INFO ] - subch:0 map pid:4FF video type:H.264
    [2014-07-30 20:13:47,985] [Log ] [scheduler thread] [INFO ] - subch:0 pid:503 audio lang:deu type:AC3
    [2014-07-30 20:13:47,986] [Log ] [scheduler thread] [INFO ] - subch:0 map pid:503 audio lang:deu type:AC3
    [2014-07-30 20:13:47,987] [Log ] [scheduler thread] [INFO ] - subch:0 pid:504 audio lang:eng type:AC3
    [2014-07-30 20:13:47,989] [Log ] [scheduler thread] [INFO ] - subch:0 map pid:504 audio lang:eng type:AC3
    [/collapse]

    mm
     

    mm1352000

    Retired Team Member
  • Premium Supporter
  • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    With a single tuner enabled started stopped and restarted the same channel Sky Cinema HD I think it was, no issue.
    Hmmmmm...
    @HTPC_Sourcer
    I see one difference between your configurations. You have "when card enters idle state..." set to pause; Stéphane has it set to stop. Could you try and see if using stop makes any difference for restarting timeshifting on the same channel?
     

    Users who are viewing this thread

    Top Bottom