tv not displaying (1 Viewer)

[HTPCSourcer]

Are you certain that a channel "Unknown 1" will give you any video?

[2016-09-18 03:38:40,430] [94588 ] [64 ] [INFO ] - Controller: got 1 tuning details for Unknown 1
[2016-09-18 03:38:40,500] [94659 ] [64 ] [INFO ] - Controller: channel #1 DVBS:tv: Unknown 1 Freq:3716000 ONID:0 TSID:1 SID:1 PMT:0x20 FTA:True LCN:10000 SymbolRate:4775 Modulation:Mod8Psk Polarisation:LinearV InnerFecRate:Rate3_5 DisEqc:Level1AB band:CBand Pilot:On RollOff:ThirtyFive

 

[ge2301]

Noticed for whatever reasons the scanned channels never leave when I uninstall 2.0
Even after deleting everything !

Do you have performed a scan and can see all channels in your list of the TV-setup?
From the logs it appears, that you have no channels. As you used MP1 before and both use the same TV engine I believe you did it according to the manual: link

 

[HTPCSourcer]

And please set your log level to ALL as described here. Then reproduce your issue and collect new logs.

 

[EW Thomas]

I can see the scanned channels fine in the preview screen. Working on modifying the config files,but I cannot get the modified copy to save. Reports "Access Denied"
I have set to run as admin in properties but it still doesn't want to play nice. Any thoughts on this?

 

[Brownard]

Working on modifying the config files,but I cannot get the modified copy to save. Reports "Access Denied"

Make sure the server service is stopped first (right click the Service Monitor tray icon -> Stop Service) and the client is closed. Remember to restart the service once you're done.

 

[EW Thomas]

Ok. Thanks Giving that a try.
--- Post updated ---
Ok. Got the changes made in a round about way Still no picture.. New Logs sent

I/m stumped Help LOL!
--- Post updated ---
Ok. Got the changes made in a round about way Still no picture.. New Logs sent
--- Post updated ---
Ok. Got the changes made in a round about way Still no picture.. New Logs sent
Still the originally scanned channel data stays and doesn't get deleted when MP2 is deleted even using an installer.

 

[Brownard]

It looks like the same issue as in this thread.
Please try [re]installing the Visual C++ 2013 (x86) redistributable from http://www.microsoft.com/en-us/download/details.aspx?id=40784, then reboot.

Still the originally scanned channel data stays and doesn't get deleted when MP2 is deleted even using an installer.

You'll need to delete the database after uninstalling if you want to start from scratch, it's located at C:\ProgramData\Team MediaPortal\MP2-Server\Database.\MP2TVE_3.s3db
The best way to get a completely fresh install is to uninstall MP2 using the installer then delete all of the MP2-* folders at C:\ProgramData\Team MediaPortal\.

 

[EW Thomas]

Ok. Got the changes made in a round about way Still no picture.. New Logs sent
Still the originally scanned channel data stays and doesn't get deleted when MP2 is deleted even using an installer.

It looks like the same issue as in this thread.
Please try [re]installing the Visual C++ 2013 (x86) redistributable from http://www.microsoft.com/en-us/download/details.aspx?id=40784, then reboot.

Still the originally scanned channel data stays and doesn't get deleted when MP2 is deleted even using an installer.

You'll need to delete the database after uninstalling if you want to start from scratch, it's located at C:\ProgramData\Team MediaPortal\MP2-Server\Database.\MP2TVE_3.s3db
The best way to get a completely fresh install is to uninstall MP2 using the installer then delete all of the MP2-* folders at C:\ProgramData\Team MediaPortal\.

OK. I'll try that. Last time I tried to reinstall I got a message stating I didn't have sufficient rights to install the MP2 server. Would this be related to anything I have done maybe??
This message is preventing me from install the package

 

[Brownard]

Last time I tried to reinstall I got a message stating I didn't have sufficient rights to install the MP2 server. Would this be related to anything I have done maybe??

This is possibly the VC++ package failing to install, there are some issues with the installer that we haven't been able to nail down yet. Did you try running the installer as Admin (right click -> Run as administrator)?

 

[EW Thomas]

I had to manually remove and reinstall under Admin Rights to install. But I still have no audio or video. I reinstalled both the 2010 and 2013 vc redistributables and rebooted but it didn't change anything.
It says on the notifications page that I have no player...no player registered to play media item "live3-0.ts.tsbuffer
Is there a player that has to be installed separate from the package?