[Approved] Updated Tuning Parameters Ziggo The Netherlands 9600 (1 Viewer)

[tCC]

Updated tuning parameters after the change on 8-5-2014.

 

[powermarcel10]

Thanks! But where are you getting those frequenties? I'm looking for freqs for 9700

 

[mm1352000]

Yes, if other networks have been updated please let us know.

 

[tCC]

I guess all Ziggo networks are updated, don't have that freqs tho.

@powermarcel10 I have an Anysee N7 network dvb-c tuner that supports "Network ID Search" (can't get a "blind scan" to work with MediaPortal).
I'm clearing all channels/transponders/frequencies and scanning the 9600 network for an updated list.

Hold on, I will try to search on the 9700 network to see if those freqs are different than the 9600.[DOUBLEPOST=1399624874][/DOUBLEPOST]Hmmm, doesn't work, when I use 9700 for the network search it doesn't find anything, sorry

 

[powermarcel10]

I guess all Ziggo networks are updated, don't have that freqs tho.

@powermarcel10 I have an Anysee N7 network dvb-c tuner that supports "Network ID Search" (can't get a "blind scan" to work with MediaPortal).
I'm clearing all channels/transponders/frequencies and scanning the 9600 network for an updated list.

Hold on, I will try to search on the 9700 network to see if those freqs are different than the 9600.[DOUBLEPOST=1399624874][/DOUBLEPOST]Hmmm, doesn't work, when I use 9700 for the network search it doesn't find anything, sorry

Thanks for looking into it!

Wich software are you using for a network ID scan? Anysee viewer or somethibg like that? Maybe my Anysee E30C can do the same? Do you know that?

 

[tCC]

No software, using the web interface of the N7 itself, it's a network dvb-c tuner

 

[powermarcel10]

No software, using the web interface of the N7 itself, it's a network dvb-c tuner

Thanks mate,

I will try to find out another solution than..

Cheers

 

[tCC]

I guess you can do a "blind scan" by scanning all frequencies and filter out that don't have a signal.

Maybe you can still use my freqs posted at http://gathering.tweakers.net/forum/list_message/36686821#36686821

Better to enter them twice in the xml, for 64 and 256 QAM[DOUBLEPOST=1399729531][/DOUBLEPOST]Please add 164.000 and 474.000 to that list on Tweakers

 

[powermarcel10]

Thanks! I have created a new transponderlist using al those freqs (64 and 256) I'm tuning for channels right now!

 

[tCC]

Let us know