XBOX360 Remote w/Laptop's IR ??? (1 Viewer)

x-p-d

Portal Member
August 3, 2006
23
0
Hampshire, U.K
My laptop has an IrCC transceiver is this any different?

IrCC = Infa Red Communications Controller

Its made by SMC, who also make imbedded IR ports for media centre PCs.

In control panel, it allows me to set a transceiver type:

AUTO (default) HP, IBM/Infineon/Temic, Sharp, or VISHAY Telefunken.

It also has options of min. turn around times, and speed (Max 4MBPS)

Without having to install MP and UICE on my laptop, does anyone know of any more information on the capabllities of this infa red type of port?

Thanks.
 

shawnwc

Portal Member
August 11, 2006
30
0
Boston, MA
XBOX Remote / Update

Ok, I bought an XBOX remote control, which as it turns out on the back also said " / Media Center Remote".

It works great with my XBOX360, but so far not a hint of anything with my Evo's IR port. I'll dig around for settings that might open up the Evo's port.

In the meantime I've ordered from RadioShack dot com a Media Center Remote and USB receiver (about $38 ). I should have it in a couple days - and I'll let you know.
 

Deco

Portal Pro
August 26, 2005
86
4
55
Ireland
Home Country
Ireland Ireland
Re: XBOX Remote / Update

shawnwc said:
In the meantime I've ordered from RadioShack dot com a Media Center Remote and USB receiver (about $38 ). I should have it in a couple days - and I'll let you know.
Thanks - be interesting to know if the Xbox360 remote really works as an MCE remote.

Can the 360 remote be programmed to control other devices (TV, AV amp, etc.)?

Thanks,
Deco.
 

Marcusb

Retired Team Member
  • Premium Supporter
  • February 16, 2005
    1,994
    29
    Melbourne
    I tried the Xbox 360 remote with my MP to be used with my existing MCE remote.

    It works to a point. Some of the HID buttons work but things like "TV Guide" and other specialised buttons don't.
    It also has some extra buttons that aren't available in MP.

    A while ago MPod said he would work on the extra functions if I could get him the codes for the non working buttons, but I haven't been able to capture any (haven't been home that much to test).

    They should show up in the log file as unknown commands, but I didn't see any there.
     

    shawnwc

    Portal Member
    August 11, 2006
    30
    0
    Boston, MA
    Nvidia GeForce 3

    Someone in the office just handed me a Nvidia GeForce 3 -- is this ok for MediaPortal (if it in fact works with my motherboard)???
     

    Marcusb

    Retired Team Member
  • Premium Supporter
  • February 16, 2005
    1,994
    29
    Melbourne
    Probably should have posted that in a different thread, but anyway, the GF3 will work with MP, but it will put more of a load on the CPU which may make your system sluggish.

    You really need at least a GF5xxx or a Radeon 95xx or above cards.
    (not too sure about the Radeons, don't use them myself)
     

    shawnwc

    Portal Member
    August 11, 2006
    30
    0
    Boston, MA
    MCE Remove/Receiver

    Ok - my MediaCenter remote showed up from RadioShack. I couldn't get XP Home to find any drivers, but after getting them from MP's site all was well.

    The remote did activate my XBOX360, which might be an issue... And I haven't had a chance to then see if the 360 remote works with the MCE receiver.

    The remote (once the drivers were installed), did work straight out of the box.
     

    Users who are viewing this thread

    Similar threads

    Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
    Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
    I used to run the TVService under the "NT Service\TVService" account to follow least privileges principal (not exposing my whole...
    Replies
    3
    Views
    2K
    I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC. TV Server development looks dead so I'm afraid you're going to have to figure that out by yourself if it's even possible.
    I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC. TV...
    Hi everyone, I've set up Mediaportal TV Server on a Windows 11 box, tuner deteced okay, scanned channels, can preview, all seems...
    Replies
    8
    Views
    817
    4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0 on Windows 7 SP1
    4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0...
    My TV PC is more a cast-off on older hardware (a 'Quiet PC' i5 4690, 16GB ram, 2xSSD 1xHDD, system graphics), mainly as a cheap way...
    Replies
    5
    Views
    1K
    I compliment you on the thoroughness of your investigations. (y) Unfortunately, I don't have any ideas what the problem might be. :( Perhaps someone else will post with some suggestions. :unsure: -- from CyberSimian in the UK
    I compliment you on the thoroughness of your investigations. (y) Unfortunately, I don't have any ideas what the problem might be...
    Would appreciate it if someone could solve (or point me in the right direction to resolve) this issue. I have “MultiSeat”...
    Replies
    4
    Views
    1K
    I think therein lies my problem. I am on 1.6.2.0. So thanks both for your help, I will pause this thread for now and come back to it while I work out what to do next. The problem is we have a family member who relies on MiniDisplay and I don't know if upgrading the set up is going to spoil compatibility with that plug in. The set up...
    I think therein lies my problem. I am on 1.6.2.0. So thanks both for your help, I will pause this thread for now and come back to...
    Good afternoon, Does anybody know of an expression or property I can use within a conditional visibility statement, that detects...
    Replies
    28
    Views
    5K
    Top Bottom